gPXE/BFO ?

[Itamar Reis Peixoto]

On Thu, Apr 15, 2010 at 2:49 AM, Chris Kloiber <ckloiber at ckloiber.com> wrote:
> So I thought I'd give this installation method a whirl (inside VirtualBox)
> but it fails every time. Usually died at:
>
> gPXE 0.9.9+ -- Open Source Boot Firmware -- http://etherboot.org
> Features: HTTP DNS TFTP AoE iSCSI bzImage COMBOOT ELF Multiboot PXE PXEXT
>
> Attempting to start boot.fedoraproject.org
> Setting up networking...
>
> static.gpxe: 325 bytes [script] [LOADED]
> Opening first network interface ...
> If you don't have DHCP, then hit Control+C to cancel
> DHCP (net0 08:00:27:99:6e:d4).... ok
> Here we go!
> http://serverbeach1.fedoraproject.org/pub/alt/bfo/pxelinux.0.
> PXELINUX 3.75 2009-04-16  Copyright (C) 1994-2009 H. Peter Anvin et al
> !PXE entry point found (we hope) at 9C59:044A via plan A
> UNDI code segment at 9C59 len 0814
> UNDI data segment at 9CDB len 2E48
> Getting cached packet 01 02 03
> My IP address seems to be C0A82039 192.168.32.57
> ip=192.168.32.57:192.168.37.9:192.168.32.1:255.255.254.0
> TFTP prefix: http://serverbeach1.fedoraproject.org/pub/alt/bfo/
> Trying to load: pxelinux.cfg/default
>
> Is this expected to work at this point?
>
> --
> Chris Kloiber
>
>
>
> --
> test mailing list
> test at lists.fedoraproject.org
> To unsubscribe:
> https://admin.fedoraproject.org/mailman/listinfo/test
>

yes, for me works

what are your network card ?

-- 
------------

Itamar Reis Peixoto