Cups crap
Powell, James F CONT
james.f.powell at navy.mil
Thu Jun 10 22:40:07 UTC 2004
Just a little more Info:
I've had some time this afternoon, so I set up the printer in a number of different ways: SMB, JetDirect and IPP, all produced the same result, blank paper coming from the printer. I don't know if this information might point someone in a direction that will help me troubleshoot this or not, but there it is.
Jim Powell
L3 Communications GSI
Senior Scientist/Engineer
AV-8B Weapons Integration
james.f.powell at navy.mil <mailto:james.f.powell at navy.mil>
(760)939-9089
> -----Original Message-----
> From: fedora-list-bounces at redhat.com
> [mailto:fedora-list-bounces at redhat.com]On Behalf Of Powell,
> James F CONT
> Sent: Thursday, June 10, 2004 14:29
> To: For users of Fedora Core releases
> Subject: RE: Cups crap
>
>
> > At 11:42 6/10/2004, Powell, James F CONT wrote:
> > >OK, I have 2 networked printers in this office, both HP Color
> > >LaserJets. One is a 4500 and one is a 4550. I'm using both
> > of them via
> > >JetDirect (which worked in FC1 without any modifications).
> > They both are
> > >maxed out in memory and have duplex units. Upon upgrading
> > to FC2, both
> > >still are accessed, but only blank sheets of paper come out
> > regardless of
> > >what type of document I send to them.
> >
> > Is the JetDirect card internal? Or is it an external
> > printserver?
>
> It is an internal card in the printers.
>
> > Which URL
> > or address are you using to print to the printers?
>
> I'm using the physical IP address of each of them, in this
> case Cubicle has an IP of 129.131.45.12.
>
> > Does CUPS actually claim
> > to support them? If so, with which drivers or methods?
>
> When you go through the printer setup, there are Drivers
> listed for both of the printers in the setup, so I hope that
> CUPS supports them. I included the 4550 in this message, as
> it is the only one included in the machine I can get to from
> this machine.
>
> > Can you post the
> > relevant sections of the config files?
>
> <Location /printers/Cubicle>
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> AuthType None
> </Location>
> <Location />
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> </Location>
> Browsing On
> BrowseProtocols cups
> BrowseOrder Deny,Allow
> BrowseAllow from @LOCAL
> Listen 127.0.0.1:631
>
> > Are there any errors in the logs?
>
> Nope, CUPS seems to think it did it's job, and at least paper
> came out.
>
> > Can you print to those networked printers from an FC1 box?
>
> Yes, no problems except it is only black and white (no
> color), which I can deal with, I rarely need color anyway.
>
> > Are there *any*
> > visible differences in the configurations between FC1 and FC2?
>
> Nothing that is obvious.
>
> >
> > DETAILS!!! <grin> It is impossible to troubleshoot anything
> > without lots of details.
>
> Sorry, I should know not to do this type of thing while I'm
> working on the aircraft, not enough time to really think
> about what you need.
>
> Jim Powell
> L3 Communications GSI
> Senior Scientist/Engineer
> AV-8B Weapons Integration
> james.f.powell at navy.mil <mailto:james.f.powell at navy.mil>
> (760)939-9089
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
More information about the users
mailing list