Planning to install FC6 on Compaq Presario SR2037X-B, do I still need enable_8254_timer?
Rick Sewill
rsewill at cableone.net
Fri Nov 10 04:13:39 UTC 2006
As time permits, I hope to install FC6 on a Compaq Presario SR2037X-B.
Currently, to boot 2.6.18-1.2200.fc5, I need to add the following option
to the kernel boot line: enable_8254_timer
[root at rsewill log]# more /boot/grub/grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this
file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,2)
# kernel /boot/vmlinuz-version ro root=/dev/sda3
# initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
hiddenmenu
password <...I deliberately excised this password information...>
title Fedora Core (2.6.18-1.2200.fc5)
root (hd0,2)
kernel /boot/vmlinuz-2.6.18-1.2200.fc5 ro root=LABEL=/ rhgb
quiet enable_8254_timer
initrd /boot/initrd-2.6.18-1.2200.fc5.img
The "quiet enable_8254_timer" is on the same line is as the
kernel /boot/vmlinuz...please forgive the email formatting.
I tried booting a DVD written from FC-6-x86_64-DVD.iso to see if this
image was usable.
The image booted far enough for me to hit return selecting the screen
install, but hung shortly thereafter. I'm guessing, if I were to type
"linux debug", I would get more detailed information getting a better
idea where the image is hanging, but I didn't think to try that earlier.
Typing: linux enable_8254_timer
caused the DVD written form FC-6-x86_64-DVD.iso to boot, verify the dvd,
and proceed to the point where it wanted to partition my disk. I
stopped the process at that point because I have not made a backup of my
disk. I need to make a backup before attempting an install. I assume,
since the image got this far, the image would successfully do an
install.
My questions:
1) Is "enable_8254_timer" the correct kernel boot option to use?
2) Should I always have to add this option to the kernel boot options?
I don't know what information may be of help in answering my questions.
Following is some of the information on my Compaq Presario
as seen by 2.6.18-1.2200.fc5
1) uname -a
2) more /proc/cpuinfo
3) more /proc/meminfo
4) df
My system is set up to dual boot.
/dev/sda1 and /dev/sda2 are used by that other operating system
when my nephew and his friends wish to play certain games.
5) more /var/log/dmesg (the output of this is quite long)
Suggestions on what I am doing wrong or should be doing are appreciated.
I have not researched what "enable_8254_timer" does. I suspect the boot
image is either selecting the wrong driver for a timer or the correct
driver for a timer has a bug in it.
Beginning of some information on my Compaq Presario...
[root at rsewill log]# uname -a
Linux rsewill.rsewill.cableone.net 2.6.18-1.2200.fc5 #1 SMP Sat Oct 14
16:59:56 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
[root at rsewill log]# more /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 79
model name : AMD Athlon(tm) 64 Processor 3800+
stepping : 2
cpu MHz : 1000.000
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt
rdtscp lm 3dnowext 3dnow up pni cx16 lahf_lm svm cr8_legacy
bogomips : 2005.94
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
[root at rsewill log]# more /proc/meminfo
MemTotal: 958372 kB
MemFree: 238324 kB
Buffers: 47520 kB
Cached: 348892 kB
SwapCached: 0 kB
Active: 365280 kB
Inactive: 282484 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 958372 kB
LowFree: 238324 kB
SwapTotal: 1020088 kB
SwapFree: 1020088 kB
Dirty: 172 kB
Writeback: 0 kB
AnonPages: 251372 kB
Mapped: 61124 kB
Slab: 37156 kB
PageTables: 15160 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 1499272 kB
Committed_AS: 813416 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 262876 kB
VmallocChunk: 34359475203 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 2048 kB
[root at rsewill log]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9912592 4216132 5184792 45% /
tmpfs 479184 0 479184 0% /dev/shm
/dev/sda6 93946992 3292768 85805008 4% /home
[root at rsewill log]# more /var/log/dmesg
Bootdata ok (command line is ro root=LABEL=/ rhgb quiet
enable_8254_timer)
Linux version 2.6.18-1.2200.fc5
(brewbuilder at hs20-bc1-6.build.redhat.com) (gcc v
ersion 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Sat Oct 14 16:59:56 EDT
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI present.
ACPI: RSDP (v000 HP-CPC ) @
0x00000000000f75b0
ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003bef304
0
ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003bef30c
0
ACPI: SSDT (v001 HP-CPC POWERNOW 0x00000001 LTP 0x00000001) @
0x000000003befa20
0
ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003befa38
0
ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003befa14
0
ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x000000000000000
0
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003bef0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003bef0000
On node 0 totalpages: 240249
DMA zone: 2628 pages, LIFO batch:0
DMA32 zone: 237621 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
Built 1 zonelists. Total pages: 240249
Kernel command line: ro root=LABEL=/ rhgb quiet enable_8254_timer
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2405.057 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ e10000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 957068k/981952k available (2393k kernel code, 24496k reserved,
1719k dat
a, 204k init)
Calibrating delay using timer specific routine.. 4814.27 BogoMIPS
(lpj=9628552)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
..MP-BIOS bug: 8254 timer not connected to IO-APIC
Using local APIC timer interrupts.
result 12526350
Detected 12.526 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
sizeof(vma)=176 bytes
sizeof(page)=64 bytes
sizeof(inode)=720 bytes
sizeof(dentry)=232 bytes
sizeof(ext3inode)=968 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
sizeof(task_struct)=1936 bytes
checking if image is initramfs... it is
Freeing initrd memory: 1099k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:05.0
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI-DMA: Disabling IOMMU.
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: 00:01: ioport range 0x2000-0x207f has been reserved
pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
PCI: Bridge: 0000:00:02.0
IO window: b000-bfff
MEM window: fde00000-fdefffff
PREFETCH window: fdb00000-fdbfffff
PCI: Bridge: 0000:00:04.0
IO window: 9000-9fff
MEM window: fda00000-fdafffff
PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:10.0
IO window: a000-afff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1163090558.572:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 3521D00968B3AB0A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not pres
ent [20060707]
ACPI: Getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 161
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-H652L, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
(version 2.00.
00)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 204k freed
Write protecting the kernel read-only data: 460k
input: AT Translated Set 2 keyboard as /class/input/input0
logips2pp: Detected unknown logitech mouse model 0
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:0e.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
GSI 16 sharing vector 0xC9 and IRQ 16
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level,
low) -> IRQ
201
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 201
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 201
scsi0 : sata_nv
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7, max UDMA/100, 390721968 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 1
ata1.00: configured for UDMA/100
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0x977
Vendor: ATA Model: ST3200827AS Rev: 3.AH
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
GSI 17 sharing vector 0xD1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level,
low) -> IRQ
209
PCI: Setting latency timer of device 0000:00:0f.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 209
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 209
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0x9E7
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0x967
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1163090563.428:2): selinux=0 auid=4294967295
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.0.1 Oct 14 2006
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV
0000:00:18.2
input: PC Speaker as /class/input/input2
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
GSI 18 sharing vector 0xD9 and IRQ 18
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level,
low) -> IRQ
217
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 217, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
GSI 19 sharing vector 0xE1 and IRQ 19
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 20 (level,
low) -> IRQ
225
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 225, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level,
low) -> IRQ
201
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
ohci_hcd 0000:00:0b.0: wakeup
usb 1-1.3: new full speed USB device using ehci_hcd and address 4
eth0: forcedeth.c: subsystem: 0103c:2a45 bound to 0000:00:14.0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level,
low) -> IRQ
209
PCI: Setting latency timer of device 0000:00:10.1 to 64
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.5: new full speed USB device using ehci_hcd and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for
generic
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
usb 2-8: new full speed USB device using ohci_hcd and address 2
usb 2-8: configuration #1 chosen from 1 choice
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0
alt 1 pr
oto 2 vid 0x03F0 pid 0x0917
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
drivers/usb/serial/usb-serial.c: USB Serial support registered for
pl2303
pl2303 1-1.3:1.0: pl2303 converter detected
usb 1-1.3: pl2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor
driver
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Vendor: Generic Model: USB SD Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:0: Attached scsi removable disk sdb
sd 4:0:0:0: Attached scsi generic sg1 type 0
Vendor: Generic Model: USB CF Reader Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:1: Attached scsi removable disk sdc
sd 4:0:0:1: Attached scsi generic sg2 type 0
Vendor: Generic Model: USB SM Reader Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:2: Attached scsi removable disk sdd
sd 4:0:0:2: Attached scsi generic sg3 type 0
Vendor: Generic Model: USB MS Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:3: Attached scsi removable disk sde
sd 4:0:0:3: Attached scsi generic sg4 type 0
usb-storage: device scan complete
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel at redhat.com
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020088k swap on /dev/sda5. Priority:-1 extents:1
across:1020088k
[root at rsewill log]#
--
Rick Sewill tel:+1-218-287-1075 mailto:rsewill at cableone.net
1028 7th St. N. mailto:rsewill at gmail.com
Moorhead, MN 56560-1568 ymsgr:rsewill sip:628497 at fwd.pulver.com
U. S. A. tel:+1-701-866-0266 xmpp:rsewill at jabber.org
More information about the users
mailing list