Is this result from lm_sensors ok? (a7n8x VM/400 mobo)

[Vijay Gill]

> What does the BIOS say about those voltages?? Are you running the latest
> BIOS?? .. The lm-sensor output may very well be wrong, as most of the
> settings are generic. After scanning though the Asus forums for the last
> month or so (Due to instabilities of my system. Random lockups, and
> rebooting etc..), I found that a lot of the Asus motherboard problems
> were due to incorrect RAM timings and RAM Voltage settings.. (I've now
> setup my board manually using the Corsair specs of my RAM and my system
> is now rock solid). It seems that the Asus BIOS doesn't set this stuff
> up properly.. Which can (And will) cause system instability. I was
> blaming FC5 kernels for this, and I was wrong.. All good for me now...
>
> It might be worth checking that out and see how you go with that..
>
> Wolf
>
Bios only tells about the VCore which is similar to VCore 1 of
lm_sensors. 12V is also simlar. The value of Vcore 2 make me worry.

Also I never suspected FC6 because FC5 also shows same behaviour on
this machine, where-as I never had FC5 bad experience with FC5 on
another machine.

I was running version 1004 (which is beta BIOS) so I switched to
officially stable 1003 for this mobo, but the problem is still there.

Thanks
Vijay