USB MicroSD card reader fails to mount

[Max Pyziur]

Greetings,

This evening when I installed my USB MicroSD reader into a USB port it 
failed to be mounted.

My flash drives mount properly.

Looking at the log files I see:
Apr 21 23:12:54 brill kernel: usb 1-2: new high speed USB device using 
ehci_hcd and address 7
Apr 21 23:12:54 brill kernel: usb 1-2: configuration #1 chosen from 1 
choice
Apr 21 23:12:54 brill kernel: scsi11 : SCSI emulation for USB Mass Storage 
devices
Apr 21 23:12:54 brill kernel: usb 1-2: New USB device found, 
idVendor=090c, idProduct=6200
Apr 21 23:12:54 brill kernel: usb 1-2: New USB device strings: Mfr=1, 
Product=2, SerialNumber=3
Apr 21 23:12:54 brill kernel: usb 1-2: Product: Generic USB2.0 card
Apr 21 23:12:54 brill kernel: usb 1-2: Manufacturer: Silicon Motion, Inc.
Apr 21 23:12:54 brill kernel: usb 1-2: SerialNumber: 12345678901234567890
Apr 21 23:12:59 brill kernel: scsi 11:0:0:0: Direct-Access     Generic 
USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
Apr 21 23:12:59 brill kernel: sd 11:0:0:0: [sdc] Attached SCSI removable 
disk
Apr 21 23:12:59 brill kernel: sd 11:0:0:0: Attached scsi generic sg3 type 
0

It stops there.

A few days ago when I mounted the reader and card, /var/log/messages read:
Apr 13 07:27:19 brill kernel: usb 3-1: USB disconnect, address 2
Apr 13 07:28:30 brill kernel: usb 1-1: new high speed USB device using 
ehci_hcd and address 3
Apr 13 07:28:30 brill kernel: usb 1-1: configuration #1 chosen from 1 
choice
Apr 13 07:28:30 brill kernel: usb 1-1: New USB device found, 
idVendor=090c, idProduct=6200
Apr 13 07:28:30 brill kernel: usb 1-1: New USB device strings: Mfr=1, 
Product=2, SerialNumber=3
Apr 13 07:28:30 brill kernel: usb 1-1: Product: Generic USB2.0 card
Apr 13 07:28:30 brill kernel: usb 1-1: Manufacturer: Silicon Motion, Inc.
Apr 13 07:28:30 brill kernel: usb 1-1: SerialNumber: 12345678901234567890
Apr 13 07:28:32 brill kernel: Initializing USB Mass Storage driver...
Apr 13 07:28:32 brill kernel: scsi6 : SCSI emulation for USB Mass Storage 
devices
Apr 13 07:28:32 brill kernel: usbcore: registered new interface driver 
usb-storage
Apr 13 07:28:32 brill kernel: USB Mass Storage support registered.
Apr 13 07:28:37 brill kernel: scsi 6:0:0:0: Direct-Access     Generic  USB 
SD Reader   1.00 PQ: 0 ANSI: 0 CCS
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] 7745536 512-byte hardware 
sectors (3966 MB)
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] Write Protect is off
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] Assuming drive cache: 
write through
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] 7745536 512-byte hardware 
sectors (3966 MB)
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] Write Protect is off
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] Assuming drive cache: 
write through
Apr 13 07:28:37 brill kernel: sdc: sdc1
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: [sdc] Attached SCSI removable 
disk
Apr 13 07:28:37 brill kernel: sd 6:0:0:0: Attached scsi generic sg3 type 0
Apr 13 07:28:40 brill gnome-keyring-daemon[3199]: adding removable 
location: volume_uuid_565F_311A at /media/Kingston
Apr 13 07:28:40 brill hald: mounted /dev/sdc1 on behalf of uid 500


Any suggestions on how to mount this card?

Much thanks.

Max Pyziur
pyz at brama.com