Sound not working

[Mike Chambers]

On Sun, 2011-12-25 at 16:33 +0800, Ed Greshko wrote:

> Could you provide the output of "lsmod | grep snd"?
> 
> FWIW, I believe (after a tiny bit of googling) that the module
> snd-hda-intel.ko is used for that hardware.

[root at scrappy ~]# lsmod | grep snd
snd_hda_codec_idt      65587  1 
snd_hda_intel          26310  2 
snd_hda_codec          97519  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep               6891  1 snd_hda_codec
snd_seq                58599  0 
snd_seq_device          6425  1 snd_seq
snd_pcm                89984  2 snd_hda_intel,snd_hda_codec
snd_timer              22199  2 snd_seq,snd_pcm
snd                    71085  12
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore               7124  1 snd
snd_page_alloc          8061  2 snd_hda_intel,snd_pcm


00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia
Controller (rev 01)
        Subsystem: Hewlett-Packard Company Device 2acd
        Flags: bus master, slow devsel, latency 64, IRQ 16
        Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel


There ya go, see anything?

Mike Chambers
Madisonville, KY