[fedora-arm] recommend outdoor hardware
Jozef Mlich
jmlich at redhat.com
Wed Oct 22 13:34:39 UTC 2014
On Tue, 2014-10-21 at 16:10 +0100, Richard W.M. Jones wrote:
>
> > I am looking for cheap arm single board computer for outdoor use.
> > low temperature (-10 deg C).
> > Can you recommend me some devices?
>
> This one is basically similar in spec to the beaglebone and has -40℃
> to +85 ℃
> http://www.cnx-software.com/2014/07/04/low-cost-industrial-board-linux-wince/
> There's likely a number of other ones based on the TI am33xx and they
> should be straight forward enough to support Fedora with device tree
> bits.
>
Thanks. The Forlink 335x device is almost exactly what I was looking
for. I have also one AM335x Sitara for testing, so it will be easy for
me to move there.
> You'd need some sort of industrial board with appropriate ratings. The
> problem with that is they also tend to be expensive.
I consider Forlink as cheap. I think, I can can go for something more
expansive than this one. I would like to have more memory.
>
> I'd differ from Peter's opinion and say instead you should go for
> something very cheap, on the basis that you can easily replace it if
> it breaks. A10 OLinuXino LIME (about $30) has several GPIO
> connectors. It is supported by the Fedora AllWinner Remix, and I
> think by the main Fedora starting in Fedora 21(?)
>
> https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/open-source-hardware
> http://olimex.wordpress.com/2013/07/30/fedora-support-for-a10-a10s-a13-and-a20-soc-from-allwinner/
Thanks. I have very good experience with allwinner a10. It is one of
options. We plan up to 20 devices, so I want to decrease maintenance
costs.
> > Additionally I want to connect some i2c/spi sensors to it. I prefer
> > fedora. Currently, I have proof of concept device using Raspberry PI. It
> > does meteo station (wind speed / direction / temperature/ ..), adsb
> > receiver, and camera.
> You seem to have got something working already, but out of interest
> did you consider a 1-wire weather station, and then just connecting
> that to an ordinary computer which can be located far away and inside
> in the warmth?
I am aware of that option. Also, I was about to buy professional weather
station, but it cost is ~600 USD and I need to buy additional computer
anyway. I was looking around on other projects [1, 2], but finally I
decided to create something new. We can discuss and explore other ways
how to get such device, but I don't want to go to much into offtopic in
this mailing list.
[1] http://openmeteostation.org/
[2] https://code.google.com/p/openws/wiki/Home
--
Jozef Mlich <jmlich at redhat.com>
More information about the arm
mailing list