piklab failed to build in koji

[Alain PORTAL]

Hi,

As I'll plan to request the EPEL-5 branch for piklab, I tried to build in 
koji.
But the built failed ans I don't unerstand why.
Can somebody help me?
http://koji.fedoraproject.org/koji/taskinfo?taskID=1967477

Regards,
Alain
-- 
Les pages de manuel Linux en français
http://manpagesfr.free.fr

[Aaron Knister]

Just a guess here-

Looking at root.log towards the bottom there's this:

DEBUG util.py:280:  Executing command: ['rpm', '-Uvh', '--nodeps',
'/builddir/build/originals/piklab-0.15.3-5.fc12.src.rpm']
DEBUG util.py:256:  piklab                      warning: user alain does not exist - using
root
DEBUG util.py:256:  warning: group alain does not exist - using root
DEBUG util.py:256:  ##################################################
DEBUG util.py:256:  error: unpacking of archive failed on file
/builddir/build/SOURCES/piklab-0.12.1.x-desktop-fr.patch;4b6edb42: cpio: MD5 sum mismatch
DEBUG util.py:319:  Child returncode was: 1

I don't know how/why that would occur

On 2/8/10 12:37 PM, Alain Portal wrote:
>  Hi,
>
>  As I'll plan to request the EPEL-5 branch for piklab, I tried to build in
>  koji.
>  But the built failed ans I don't unerstand why.
>  Can somebody help me?
>  http://koji.fedoraproject.org/koji/taskinfo?taskID=1967477
>
>  Regards,
>  Alain
>     
>
>
>  _______________________________________________
>  epel-devel-list mailing list
>  epel-devel-list(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/epel-devel-list
>

[Paul Howarth]

On Mon, 08 Feb 2010 12:51:40 -0500
Aaron Knister <aaron.knister(a)gmail.com&gt; wrote:

>  Just a guess here-
>  
>  Looking at root.log towards the bottom there's this:
>  
>  DEBUG util.py:280:  Executing command: ['rpm', '-Uvh',
> '--nodeps',
>  '/builddir/build/originals/piklab-0.15.3-5.fc12.src.rpm'] DEBUG
>  util.py:256:  piklab                      warning: user alain does
>  not exist - using root DEBUG util.py:256:  warning: group alain does
>  not exist - using root DEBUG util.py:256:
>  ################################################## DEBUG
>  util.py:256:  error: unpacking of archive failed on
>  file /builddir/build/SOURCES/piklab-0.12.1.x-desktop-fr.patch;4b6edb42:
>  cpio: MD5 sum mismatch DEBUG util.py:319:  Child returncode was: 1
>  
>  I don't know how/why that would occur 
It was probably an srpm-scratch-build with the SRPM created for a
recent Fedora (i.e. with stronger SHA signatures) rather than using an
SRPM built in the EL-5 branch, which would have had appropriate
signatures for an EL-5 build.

Paul.

[Alain PORTAL]

Le lundi 08 février 2010 19:08:45, Paul Howarth a écrit :

>  It was probably an srpm-scratch-build with the SRPM created for a
>  recent Fedora (i.e. with stronger SHA signatures) rather than using an
>  SRPM built in the EL-5 branch, which would have had appropriate
>  signatures for an EL-5 build. 
SRPM was built on F12.
Unfortunately, I haven't yet enough machine to install an EL-5 like OS.

-- 
Les pages de manuel Linux en français
http://manpagesfr.free.fr

[Alain PORTAL]

Le lundi 08 février 2010 18:51:40, Aaron Knister a écrit :
>  Just a guess here-
>  
>  Looking at root.log towards the bottom there's this:
>  
>  DEBUG util.py:280:  Executing command: ['rpm', '-Uvh',
> '--nodeps',
>   '/builddir/build/originals/piklab-0.15.3-5.fc12.src.rpm'] DEBUG
>   util.py:256:  piklab                      warning: user alain does not
>   exist - using root DEBUG util.py:256:  warning: group alain does not exist
>   - using root DEBUG util.py:256: 
>   ################################################## DEBUG util.py:256: 
>   error: unpacking of archive failed on file
>   /builddir/build/SOURCES/piklab-0.12.1.x-desktop-fr.patch;4b6edb42: cpio:
>   MD5 sum mismatch DEBUG util.py:319:  Child returncode was: 1
>  
>  I don't know how/why that would occur 
As me...

-- 
Les pages de manuel Linux en français
http://manpagesfr.free.fr

[Dan Horák]

Alain Portal píše v Po 08. 02. 2010 v 19:19 +0100: 
>  Le lundi 08 février 2010 18:51:40, Aaron Knister a écrit :
>  > Just a guess here-
>  > 
>  > Looking at root.log towards the bottom there's this:
>  > 
>  > DEBUG util.py:280:  Executing command: ['rpm', '-Uvh',
> '--nodeps',
>  >  '/builddir/build/originals/piklab-0.15.3-5.fc12.src.rpm'] DEBUG
>  >  util.py:256:  piklab                      warning: user alain does not
>  >  exist - using root DEBUG util.py:256:  warning: group alain does not exist
>  >  - using root DEBUG util.py:256: 
>  >  ################################################## DEBUG util.py:256: 
>  >  error: unpacking of archive failed on file
>  >  /builddir/build/SOURCES/piklab-0.12.1.x-desktop-fr.patch;4b6edb42: cpio:
>  >  MD5 sum mismatch DEBUG util.py:319:  Child returncode was: 1
>  > 
>  > I don't know how/why that would occur
>  
>  As me... 
If you are creating the srpms with rpmbuild and not with "make srpm" in
checkout directory from CVS and you are running Fedora 12+, then you
must use rpmbuild-md5 for EL packages.


Dan

[Alain PORTAL]

Le lundi 08 février 2010 19:30:27, Dan Horák a écrit :

>  If you are creating the srpms with rpmbuild and not with "make
> srpm" in
>  checkout directory from CVS and you are running Fedora 12+, then you
>  must use rpmbuild-md5 for EL packages. 
Works fine, thanks!

Alain
-- 
Les pages de manuel Linux en français
http://manpagesfr.free.fr

[Dennis Gilmore]

On Monday 08 February 2010 12:30:27 pm Dan Horák wrote:
>  Alain Portal píše v Po 08. 02. 2010 v 19:19 +0100:
>  > Le lundi 08 février 2010 18:51:40, Aaron Knister a écrit :
>  > > Just a guess here-
>  > > 
>  > > Looking at root.log towards the bottom there's this:
>  > > 
>  > > DEBUG util.py:280:  Executing command: ['rpm', '-Uvh',
> '--nodeps',
>  > > 
>  > >  '/builddir/build/originals/piklab-0.15.3-5.fc12.src.rpm'] DEBUG
>  > >  util.py:256:  piklab                      warning: user alain does not
>  > >  exist - using root DEBUG util.py:256:  warning: group alain does not
>  > >  exist - using root DEBUG util.py:256:
>  > >  ################################################## DEBUG util.py:256:
>  > >  error: unpacking of archive failed on file
>  > >  /builddir/build/SOURCES/piklab-0.12.1.x-desktop-fr.patch;4b6edb42:
>  > >  cpio: MD5 sum mismatch DEBUG util.py:319:  Child returncode was: 1
>  > > 
>  > > I don't know how/why that would occur
>  > 
>  > As me...
>  
>  If you are creating the srpms with rpmbuild and not with "make srpm" in
>  checkout directory from CVS and you are running Fedora 12+, then you
>  must use rpmbuild-md5 for EL packages. 
you must use it for all SRPM creation intened for EL from a active fedora 
branch.  in the EL branches we call rpmbuild with the right definitions.  we do 
not make the same defines in the fedora branches. 
you can do make srpm.  then copy and past the command it runs and change 
rpmbuild to rpmbuild-md5


Dennis