Hello to all,
I want to flash it again but it didn't work:
U-Boot 2021.04 (Apr 21 2021 - 00:00:00 +0000)
SoC: Rockchip rk3399 Reset cause: POR Model: Pine64 Pinebook Pro DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment
In: serial Out: vidconsole Err: vidconsole Model: Pine64 Pinebook Pro Net: No ethernet found. starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3a0000: USB OHCI 1.0 Bus usb@fe3c0000: USB EHCI 1.00 Bus usb@fe3e0000: USB OHCI 1.0 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3a0000 for devices... 2 USB Device(s) found scanning bus usb@fe3c0000 for devices... 3 USB Device(s) found scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 => ls mmc 1:1 167509 idbloader.img 335872 idbloader.spi 975536 u-boot.itb 9331376 u-boot-rockchip.bin
4 file(s), 0 dir(s)
=> sf probe SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB => load mmc 1:1 ${fdt_addr_r} idbloader.spi 335872 bytes read in 39 ms (8.2 MiB/s) => sf update ${fdt_addr_r} 0 ${filesize} device 0 offset 0x0, size 0x52000 0 bytes written, 335872 bytes skipped in 0.279s, speed 1228331 B/s => load mmc 1:1 ${fdt_addr_r} u-boot.itb 975536 bytes read in 106 ms (8.8 MiB/s) => sf update ${fdt_addr_r} 60000 ${filesize} device 0 offset 0x60000, size 0xee2b0 0 bytes written, 975536 bytes skipped in 0.814s, speed 1225704 B/s =>
How to fixit?
Thanks Andreas