Fedora on Rock 5B

[Andreas Reschke]

Hi there,
I've tried to install Fedora on my Rock 5 without success.

Booting with 
https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b... 
on SD-Card and source from 
https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....

Board boots up fine but later starting in loop with
350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda 
installer errors end ###############
[  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: 
timeout, still waiting for following initqueue hooks:
[  352.161387] dracut-initqueue[1065]: Warning: 
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e 
"/dev/root" ]"
[  352.164564] dracut-initqueue[1065]: Warning: 
/lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" 
-ge "10" ]"
[  352.167716] dracut-initqueue[1065]: Warning: 
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f 
/tmp/settle.done ]"
[  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: 
starting timeout scripts
[  352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda 
installer errors begin #############
[  352.172852] dracut-initqueue[1065]: Warning: # 
                                  #
[  352.173097] dracut-initqueue[1065]: Warning: It seems that the boot 
has failed. Possible causes include
[  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or 
inst.repo boot parameters on the
[  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please 
verify that you have specified
[  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[  352.173918] dracut-initqueue[1065]: Warning: Please also note that 
the 'inst.' prefix is now mandatory.
[  352.174156] dracut-initqueue[1065]: Warning: # 
                                  #
[  352.174354] dracut-initqueue[1065]: Warning: ####     Installer 
errors encountered during boot:     ####
[  352.174543] dracut-initqueue[1065]: Warning: # 
                                  #
[  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
[  352.174970] dracut-initqueue[1065]: Warning: # 
                                  #

Full log file: see rock.txt

Has anybody more succcess ?

Greetings
Andreas

[Peter Robinson]

Hi,

It's in my backlog of devices to play with for F-39.

It looks like it's not finding the storage, you don't mention what sort of
storage you're trying to run Fedora from, is it the SD card or do you have
the firmware on SD and Fedora on something else?

Peter

On Sun, 30 Jul 2023, 13:18 Andreas Reschke,  wrote:
> Hi there,
> I've tried to install Fedora on my Rock 5 without success.
>
> Booting with
>
> https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> on SD-Card and source from
>
> https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything...
> .
>
> Board boots up fine but later starting in loop with
> 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> installer errors end ###############
> [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> timeout, still waiting for following initqueue hooks:
> [  352.161387] dracut-initqueue[1065]: Warning:
> /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
> "/dev/root" ]"
> [  352.164564] dracut-initqueue[1065]: Warning:
> /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
> -ge "10" ]"
> [  352.167716] dracut-initqueue[1065]: Warning:
> /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> /tmp/settle.done ]"
> [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> starting timeout scripts
> [  352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
> installer errors begin #############
> [  352.172852] dracut-initqueue[1065]: Warning: #
>                                   #
> [  352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
> has failed. Possible causes include
> [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
> inst.repo boot parameters on the
> [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
> verify that you have specified
> [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
> [  352.173918] dracut-initqueue[1065]: Warning: Please also note that
> the 'inst.' prefix is now mandatory.
> [  352.174156] dracut-initqueue[1065]: Warning: #
>                                   #
> [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> errors encountered during boot:     ####
> [  352.174543] dracut-initqueue[1065]: Warning: #
>                                   #
> [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> [  352.174970] dracut-initqueue[1065]: Warning: #
>                                   #
>
> Full log file: see rock.txt
>
> Has anybody more succcess ?
>
> Greetings
> Andreas_______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct:
> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it:
> https://pagure.io/fedora-infrastructure/new_issue

Am 2023-07-30 15:26, schrieb Peter Robinson:
> Hi,
>
> It's in my backlog of devices to play with for F-39.
>
> It looks like it's not finding the storage, you don't mention what
> sort of storage you're trying to run Fedora from, is it the SD card or
> do you have the firmware on SD and Fedora on something else?
>
> Peter

Hello Peter,
UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick 
and NVME disc are available for storage.
> On Sun, 30 Jul 2023, 13:18 Andreas Reschke, 
> wrote:
> > Hi there,
> > I've tried to install Fedora on my Rock 5 without success.
> >
> > Booting with
>
> https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> > on SD-Card and source from
>
> https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
> > Board boots up fine but later starting in loop with
> > 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> > installer errors end ###############
> > [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > timeout, still waiting for following initqueue hooks:
> > [  352.161387] dracut-initqueue[1065]: Warning:
> > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh:
> > "[ -e
> > "/dev/root" ]"
> > [  352.164564] dracut-initqueue[1065]: Warning:
> > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[
> > "$main_loop"
> > -ge "10" ]"
> > [  352.167716] dracut-initqueue[1065]: Warning:
> > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> > /tmp/settle.done ]"
> > [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > starting timeout scripts
> > [  352.172610] dracut-initqueue[1065]: Warning: #############
> > Anaconda
> > installer errors begin #############
> > [  352.172852] dracut-initqueue[1065]: Warning: #
> > #
> > [  352.173097] dracut-initqueue[1065]: Warning: It seems that the
> > boot
> > has failed. Possible causes include
> > [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2
> > or
> > inst.repo boot parameters on the
> > [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline.
> > Please
> > verify that you have specified
> > [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or
> > inst.repo.
> > [  352.173918] dracut-initqueue[1065]: Warning: Please also note
> > that
> > the 'inst.' prefix is now mandatory.
> > [  352.174156] dracut-initqueue[1065]: Warning: #
> > #
> > [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> > errors encountered during boot:     ####
> > [  352.174543] dracut-initqueue[1065]: Warning: #
> > #
> > [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> > [  352.174970] dracut-initqueue[1065]: Warning: #
> > #
> >
> > Full log file: see rock.txt
> >
> > Has anybody more succcess ?
> >
> > Greetings
> > Andreas_______________________________________________
> > arm mailing list -- [e-mail]
> > To unsubscribe send an email to [e-mail]
> > Fedora Code of Conduct:
> > https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > List Guidelines:
> > https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives:
>
> https://lists.fedoraproject.org/archives/list/[e-mail]
> > Do not reply to spam, report it:
> > https://pagure.io/fedora-infrastructure/new_issue

[Peter Robinson]

Hi Andreas,
> > It's in my backlog of devices to play with for F-39.
> >
> > It looks like it's not finding the storage, you don't mention what
> > sort of storage you're trying to run Fedora from, is it the SD card or
> > do you have the firmware on SD and Fedora on something else?
> >
> > Peter
>
> Hello Peter,
> UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick
> and NVME disc are available for storage.

So a quick look on upstream lists it doesn't look like USB [1] or
either of the PCI controllers [2][3], there's two different ones, have
yet made it upstream as yet. so ATM without a custom kernel I wouldn't
expect it to work for either USB or NVME storage.

The patch set for the USB support isn't upstream yet and it'll only
support the upper USB3 port until they land another driver. On the
plus side it looks like both the pcie patch sets are headed towards
the 6.6 merge window.

Looking at upstream DTs for the Rock5B it looks like it's just the
mSD/eMMC storage that's enabled as of 6.5-rc4, it doesn't look like
even the ethernet works.

I think out of the box we probably won't be usable until F-40 for this
device. I have seen a lot posted upstream, it seems a lot of that
hasn't actually landed yet though.

Peter

[1] https://www.spinics.net/lists/linux-usb/msg244163.html
[2] https://www.spinics.net/lists/linux-pci/msg141988.html
[3] https://www.spinics.net/lists/linux-pci/msg141465.html
> > On Sun, 30 Jul 2023, 13:18 Andreas Reschke, 
> > wrote:
> > > Hi there,
> > > I've tried to install Fedora on my Rock 5 without success.
> > >
> > > Booting with
> >
> > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> > > on SD-Card and source from
> >
> > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
> > > Board boots up fine but later starting in loop with
> > > 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> > > installer errors end ###############
> > > [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > timeout, still waiting for following initqueue hooks:
> > > [  352.161387] dracut-initqueue[1065]: Warning:
> > > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh:
> > > "[ -e
> > > "/dev/root" ]"
> > > [  352.164564] dracut-initqueue[1065]: Warning:
> > > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[
> > > "$main_loop"
> > > -ge "10" ]"
> > > [  352.167716] dracut-initqueue[1065]: Warning:
> > > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> > > /tmp/settle.done ]"
> > > [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > starting timeout scripts
> > > [  352.172610] dracut-initqueue[1065]: Warning: #############
> > > Anaconda
> > > installer errors begin #############
> > > [  352.172852] dracut-initqueue[1065]: Warning: #
> > > #
> > > [  352.173097] dracut-initqueue[1065]: Warning: It seems that the
> > > boot
> > > has failed. Possible causes include
> > > [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2
> > > or
> > > inst.repo boot parameters on the
> > > [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline.
> > > Please
> > > verify that you have specified
> > > [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or
> > > inst.repo.
> > > [  352.173918] dracut-initqueue[1065]: Warning: Please also note
> > > that
> > > the 'inst.' prefix is now mandatory.
> > > [  352.174156] dracut-initqueue[1065]: Warning: #
> > > #
> > > [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> > > errors encountered during boot:     ####
> > > [  352.174543] dracut-initqueue[1065]: Warning: #
> > > #
> > > [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> > > [  352.174970] dracut-initqueue[1065]: Warning: #
> > > #
> > >
> > > Full log file: see rock.txt
> > >
> > > Has anybody more succcess ?
> > >
> > > Greetings
> > > Andreas_______________________________________________
> > > arm mailing list -- [e-mail]
> > > To unsubscribe send an email to [e-mail]
> > > Fedora Code of Conduct:
> > > https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > > List Guidelines:
> > > https://fedoraproject.org/wiki/Mailing_list_guidelines
> > > List Archives:
> >
> > https://lists.fedoraproject.org/archives/list/[e-mail]
> > > Do not reply to spam, report it:
> > > https://pagure.io/fedora-infrastructure/new_issue

[Andreas Reschke]

Thank you Peter,

so we have to wait. I will try it again at the end of the year.

Greetings

Andreas

Am 01.08.23 um 00:06 schrieb Peter Robinson:
> Hi Andreas,
> > > It's in my backlog of devices to play with for F-39.
> > >
> > > It looks like it's not finding the storage, you don't mention what
> > > sort of storage you're trying to run Fedora from, is it the SD card or
> > > do you have the firmware on SD and Fedora on something else?
> > >
> > > Peter
> >
> > Hello Peter,
> > UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick
> > and NVME disc are available for storage.
>
> So a quick look on upstream lists it doesn't look like USB [1] or
> either of the PCI controllers [2][3], there's two different ones, have
> yet made it upstream as yet. so ATM without a custom kernel I wouldn't
> expect it to work for either USB or NVME storage.
>
> The patch set for the USB support isn't upstream yet and it'll only
> support the upper USB3 port until they land another driver. On the
> plus side it looks like both the pcie patch sets are headed towards
> the 6.6 merge window.
>
> Looking at upstream DTs for the Rock5B it looks like it's just the
> mSD/eMMC storage that's enabled as of 6.5-rc4, it doesn't look like
> even the ethernet works.
>
> I think out of the box we probably won't be usable until F-40 for this
> device. I have seen a lot posted upstream, it seems a lot of that
> hasn't actually landed yet though.
>
> Peter
>
> [1] https://www.spinics.net/lists/linux-usb/msg244163.html
> [2] https://www.spinics.net/lists/linux-pci/msg141988.html
> [3] https://www.spinics.net/lists/linux-pci/msg141465.html
> > > On Sun, 30 Jul 2023, 13:18 Andreas Reschke, 
> > > wrote:
> > > > Hi there,
> > > > I've tried to install Fedora on my Rock 5 without success.
> > > >
> > > > Booting with
> > >
> > > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> > > > on SD-Card and source from
> > >
> > > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
> > > > Board boots up fine but later starting in loop with
> > > > 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> > > > installer errors end ###############
> > > > [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > > timeout, still waiting for following initqueue hooks:
> > > > [  352.161387] dracut-initqueue[1065]: Warning:
> > > > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh:
> > > > "[ -e
> > > > "/dev/root" ]"
> > > > [  352.164564] dracut-initqueue[1065]: Warning:
> > > > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[
> > > > "$main_loop"
> > > > -ge "10" ]"
> > > > [  352.167716] dracut-initqueue[1065]: Warning:
> > > > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> > > > /tmp/settle.done ]"
> > > > [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > > starting timeout scripts
> > > > [  352.172610] dracut-initqueue[1065]: Warning: #############
> > > > Anaconda
> > > > installer errors begin #############
> > > > [  352.172852] dracut-initqueue[1065]: Warning: #
> > > > #
> > > > [  352.173097] dracut-initqueue[1065]: Warning: It seems that the
> > > > boot
> > > > has failed. Possible causes include
> > > > [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2
> > > > or
> > > > inst.repo boot parameters on the
> > > > [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline.
> > > > Please
> > > > verify that you have specified
> > > > [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or
> > > > inst.repo.
> > > > [  352.173918] dracut-initqueue[1065]: Warning: Please also note
> > > > that
> > > > the 'inst.' prefix is now mandatory.
> > > > [  352.174156] dracut-initqueue[1065]: Warning: #
> > > > #
> > > > [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> > > > errors encountered during boot:     ####
> > > > [  352.174543] dracut-initqueue[1065]: Warning: #
> > > > #
> > > > [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> > > > [  352.174970] dracut-initqueue[1065]: Warning: #
> > > > #
> > > >
> > > > Full log file: see rock.txt
> > > >
> > > > Has anybody more succcess ?
> > > >
> > > > Greetings
> > > > Andreas_______________________________________________
> > > > arm mailing list -- [e-mail]
> > > > To unsubscribe send an email to [e-mail]
> > > > Fedora Code of Conduct:
> > > > https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > > > List Guidelines:
> > > > https://fedoraproject.org/wiki/Mailing_list_guidelines
> > > > List Archives:
> > >
> > > https://lists.fedoraproject.org/archives/list/[e-mail]
> > > > Do not reply to spam, report it:
> > > > https://pagure.io/fedora-infrastructure/new_issue

[Andreas Reschke]

Hello,

today I've tried once again to install Fedora on Rock 5B.

It works !! Even with GUI!

What you need:
1) 
https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.9.1/rock-5b...
dd this Image on a SD-Card

2) 
https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything...

dd this Image on a USB stick

Put both in your Rock 5B and boot. I've done the Net-install 
installation with KDE Wayland. The SD-Card with UEFI is needed for 
booting. Don't know if it's possible to write it to the Firmware or 
somewhere else.

After a first check

not working:

- Sound

- Bluetooth

working

- Fan for CPU

- WIFI

- NVME

oot@rockpi5:~# lsblk -f
NAME              FSTYPE      FSVER    LABEL UUID 
                                   FSAVAIL FSUSE% MOUNTPOINTS
zram0 
                                                                                              [SWAP]
nvme0n1
├─nvme0n1p1       vfat        FAT32          F81B-9757 
                                 588M     2% /boot/efi
├─nvme0n1p2       xfs 
                        0fa12a00-a5e6-4063-b5d9-a6bbb8e5d324    711,5M 
    26% /boot
└─nvme0n1p3       LVM2_member LVM2 001 
       6X90NM-HSY9-mFxU-AmZs-aBwa-53sW-OeWx6m
  ├─fedora-root   xfs 
                        900a06a9-f39b-45ee-b088-439a4088693c      6,1G 
    59% /
  └─fedora-homelv xfs 
                        cc8dcc56-38ac-4ac2-9c0c-332b89044974     95,4G 
     5% /home
root@rockpi5:~# lspci
0000:01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd 
NVMe SSD Controller SM961/PM961/SM963
0002:01:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 
b852
0004:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8125 2.5GbE Controller (rev 05)
root@rockpi5:~# lsmod | sort
bluetooth             897024  17 
btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm
bnep                   32768  2
btbcm                  24576  1 btusb
btintel                57344  1 btusb
btmtk                  16384  1 btusb
btrtl                  32768  1 btusb
btusb                  77824  0
cfg80211             1073152  3 rtw89_8852b,rtw89_core,mac80211
crct10dif_ce           12288  1
dm_multipath           45056  0
fat                    94208  1 vfat
fuse                  180224  3
ghash_ce               20480  0
ip_set                 61440  0
joydev                 32768  0
libarc4                12288  1 mac80211
loop                   36864  0
mac80211             1282048  2 rtw89_core,rtw89_pci
Module                  Size  Used by
nf_conntrack          180224  2 nf_nat,nft_ct
nf_defrag_ipv4         12288  1 nf_conntrack
nf_defrag_ipv6         24576  1 nf_conntrack
nf_nat                 57344  1 nft_chain_nat
nfnetlink              20480  3 nf_tables,ip_set
nf_reject_ipv4         16384  1 nft_reject_inet
nf_reject_ipv6         24576  1 nft_reject_inet
nf_tables             286720  391 
nft_ct,nft_reject_inet,nft_fib_ipv6,nft_fib_ipv4,nft_chain_nat,nft_reject,nft_fib,nft_fib_inet
nft_chain_nat          12288  3
nft_ct                 20480  7
nft_fib                12288  3 nft_fib_ipv6,nft_fib_ipv4,nft_fib_inet
nft_fib_inet           12288  1
nft_fib_ipv4           12288  1 nft_fib_inet
nft_fib_ipv6           12288  1 nft_fib_inet
nft_reject             12288  1 nft_reject_inet
nft_reject_inet        12288  16
nvme                   57344  4
nvme_core             176128  5 nvme
ohci_hcd               61440  1 ohci_platform
ohci_platform          12288  0
polyval_ce             12288  0
polyval_generic        12288  1 polyval_ce
qrtr                   45056  4
r8169                 110592  0
rfcomm                 98304  0
rfkill                 40960  8 bluetooth,cfg80211
rtw89_8852b           368640  1 rtw89_8852be
rtw89_8852be           12288  0
rtw89_core            495616  2 rtw89_8852b,rtw89_pci
rtw89_pci              69632  1 rtw89_8852be
scsi_dh_alua           24576  0
scsi_dh_emc            12288  0
scsi_dh_rdac           16384  0
snd                   131072  5 snd_seq,snd_seq_device,snd_timer
snd_hrtimer            12288  1
snd_seq               110592  7 snd_seq_dummy
snd_seq_device         16384  1 snd_seq
snd_seq_dummy          12288  0
snd_timer              49152  2 snd_seq,snd_hrtimer
soundcore              16384  1 snd
sunrpc                733184  1
uinput                 24576  0
vfat                   20480  1
xfs                  2199552  3
xhci_plat_hcd          20480  0
zram                   32768  2
root@rockpi5:~#

Don't know what driver for graphic is used. System isn't fast as the 
Armbian version, but hey it's working.

Andreas

Am 01.08.23 um 08:27 schrieb Andreas Reschke:
> Thank you Peter,
>
> so we have to wait. I will try it again at the end of the year.
>
> Greetings
>
> Andreas
>
> Am 01.08.23 um 00:06 schrieb Peter Robinson:
> > Hi Andreas,
> > > > It's in my backlog of devices to play with for F-39.
> > > >
> > > > It looks like it's not finding the storage, you don't mention what
> > > > sort of storage you're trying to run Fedora from, is it the SD card or
> > > > do you have the firmware on SD and Fedora on something else?
> > > >
> > > > Peter
> > >
> > > Hello Peter,
> > > UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick
> > > and NVME disc are available for storage.
> >
> > So a quick look on upstream lists it doesn't look like USB [1] or
> > either of the PCI controllers [2][3], there's two different ones, have
> > yet made it upstream as yet. so ATM without a custom kernel I wouldn't
> > expect it to work for either USB or NVME storage.
> >
> > The patch set for the USB support isn't upstream yet and it'll only
> > support the upper USB3 port until they land another driver. On the
> > plus side it looks like both the pcie patch sets are headed towards
> > the 6.6 merge window.
> >
> > Looking at upstream DTs for the Rock5B it looks like it's just the
> > mSD/eMMC storage that's enabled as of 6.5-rc4, it doesn't look like
> > even the ethernet works.
> >
> > I think out of the box we probably won't be usable until F-40 for this
> > device. I have seen a lot posted upstream, it seems a lot of that
> > hasn't actually landed yet though.
> >
> > Peter
> >
> > [1] https://www.spinics.net/lists/linux-usb/msg244163.html
> > [2] https://www.spinics.net/lists/linux-pci/msg141988.html
> > [3] https://www.spinics.net/lists/linux-pci/msg141465.html
> > > > On Sun, 30 Jul 2023, 13:18 Andreas Reschke, 
> > > > wrote:
> > > > > Hi there,
> > > > > I've tried to install Fedora on my Rock 5 without success.
> > > > >
> > > > > Booting with
> > > >
> > > > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> > > > > on SD-Card and source from
> > > >
> > > > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
> > > > > Board boots up fine but later starting in loop with
> > > > > 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> > > > > installer errors end ###############
> > > > > [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > > > timeout, still waiting for following initqueue hooks:
> > > > > [  352.161387] dracut-initqueue[1065]: Warning:
> > > > > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh:
> > > > > "[ -e
> > > > > "/dev/root" ]"
> > > > > [  352.164564] dracut-initqueue[1065]: Warning:
> > > > > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[
> > > > > "$main_loop"
> > > > > -ge "10" ]"
> > > > > [  352.167716] dracut-initqueue[1065]: Warning:
> > > > > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> > > > > /tmp/settle.done ]"
> > > > > [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > > > starting timeout scripts
> > > > > [  352.172610] dracut-initqueue[1065]: Warning: #############
> > > > > Anaconda
> > > > > installer errors begin #############
> > > > > [  352.172852] dracut-initqueue[1065]: Warning: #
> > > > > #
> > > > > [  352.173097] dracut-initqueue[1065]: Warning: It seems that the
> > > > > boot
> > > > > has failed. Possible causes include
> > > > > [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2
> > > > > or
> > > > > inst.repo boot parameters on the
> > > > > [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline.
> > > > > Please
> > > > > verify that you have specified
> > > > > [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or
> > > > > inst.repo.
> > > > > [  352.173918] dracut-initqueue[1065]: Warning: Please also note
> > > > > that
> > > > > the 'inst.' prefix is now mandatory.
> > > > > [  352.174156] dracut-initqueue[1065]: Warning: #
> > > > > #
> > > > > [  352.174354] dracut-initqueue[1065]: Warning: #### Installer
> > > > > errors encountered during boot:     ####
> > > > > [  352.174543] dracut-initqueue[1065]: Warning: #
> > > > > #
> > > > > [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> > > > > [  352.174970] dracut-initqueue[1065]: Warning: #
> > > > > #
> > > > >
> > > > > Full log file: see rock.txt
> > > > >
> > > > > Has anybody more succcess ?
> > > > >
> > > > > Greetings
> > > > > Andreas_______________________________________________
> > > > > arm mailing list -- [e-mail]
> > > > > To unsubscribe send an email to [e-mail]
> > > > > Fedora Code of Conduct:
> > > > > https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > > > > List Guidelines:
> > > > > https://fedoraproject.org/wiki/Mailing_list_guidelines
> > > > > List Archives:
> > > >
> > > > https://lists.fedoraproject.org/archives/list/[e-mail]
> > > > > Do not reply to spam, report it:
> > > > > https://pagure.io/fedora-infrastructure/new_issue
>
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct: 
> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: 
> https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it: 
> https://pagure.io/fedora-infrastructure/new_issue

[Peter Robinson]

Hi Folks,
> It's in my backlog of devices to play with for F-39.
>
> It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else?

So I've finally started to look at this and yes, it looks like there's
issues with the SD card in Linux although apparently it should be
supported. I will be looking at that over the weekend.

I need to find a spare NVME drive to put in it.

The plan is to have some level of support in Fedora 40.

The upstream status as documented here is a pretty good overview of
where we're at upstream:
https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-roc...
> On Sun, 30 Jul 2023, 13:18 Andreas Reschke,  wrote:
> > Hi there,
> > I've tried to install Fedora on my Rock 5 without success.
> >
> > Booting with
> > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> > on SD-Card and source from
> > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
> >
> > Board boots up fine but later starting in loop with
> > 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> > installer errors end ###############
> > [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > timeout, still waiting for following initqueue hooks:
> > [  352.161387] dracut-initqueue[1065]: Warning:
> > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
> > "/dev/root" ]"
> > [  352.164564] dracut-initqueue[1065]: Warning:
> > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
> > -ge "10" ]"
> > [  352.167716] dracut-initqueue[1065]: Warning:
> > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> > /tmp/settle.done ]"
> > [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > starting timeout scripts
> > [  352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
> > installer errors begin #############
> > [  352.172852] dracut-initqueue[1065]: Warning: #
> >                                   #
> > [  352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
> > has failed. Possible causes include
> > [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
> > inst.repo boot parameters on the
> > [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
> > verify that you have specified
> > [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
> > [  352.173918] dracut-initqueue[1065]: Warning: Please also note that
> > the 'inst.' prefix is now mandatory.
> > [  352.174156] dracut-initqueue[1065]: Warning: #
> >                                   #
> > [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> > errors encountered during boot:     ####
> > [  352.174543] dracut-initqueue[1065]: Warning: #
> >                                   #
> > [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> > [  352.174970] dracut-initqueue[1065]: Warning: #
> >                                   #
> >
> > Full log file: see rock.txt
> >
> > Has anybody more succcess ?
> >
> > Greetings
> > Andreas_______________________________________________
> > arm mailing list -- [e-mail]
> > To unsubscribe send an email to [e-mail]
> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]
> > Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue

[Andreas Reschke]

Hello Peter,

update from my side: booting with the last version v0.9.1 from 
https://github.com/edk2-porting/edk2-rk3588/releases/ and actual Fedora 
40 Rawhide the installation works fine.

I'm writing this mail from this SBC.

root@rockpi5:~# inxi -F
System:
Host:rockpi5.reschke.lan
Kernel:6.8.0-0.rc4.20240214git7e90b5c295ec.37.fc41.aarch64 arch:aarch64
bits:64
Console:pty pts/1 Distro:Fedora Linux 41 (Rawhide Prerelease)
Machine:
Type:Embedded-pc Mobo:Radxa model:ROCK 5 Model B serial:386F0C585A66D216
UEFI:EDK II v:0.9.1 date:10/12/2023
CPU:
Info:triple core model:N/A bits:64 type:MT MCP cache:L2:2.5 MiB
Speed:N/A min/max:N/A cores:No per core speed data found.
Graphics:
Message:No PCI device data found.
Display:server:X.Org v:23.2.4 with:Xwayland v:23.2.4 driver:X:
loaded:modesetting dri:swrast gpu:N/A resolution:1920x1080~60Hz
API:EGL v:1.5 drivers:kms_swrast,swrast
platforms:gbm,x11,surfaceless,device
API:OpenGL v:4.5 vendor:mesa v:24.0.0 renderer:llvmpipe (LLVM 17.0.6
    128 bits)
API:Vulkan v:1.3.268 drivers:llvmpipe surfaces:xcb,xlib
Audio:
Message:No device data found.
API:ALSA v:k6.8.0-0.rc4.20240214git7e90b5c295ec.37.fc41.aarch64
status:kernel-api
Network:
Device-1:Realtek RTL8852BE PCIe 802.11ax Wireless Network
driver:rtw89_8852be
IF:wlP2p1s0 state:up mac:2c:05:47:8f:e9:e1
Device-2:Realtek RTL8125 2.5GbE driver:r8169
IF:enP4p1s0 state:up speed:1000 Mbps duplex:full
mac:00:e0:4c:68:00:cd
Bluetooth:
Device-1:Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver:btusb
type:USB
Report:btmgmt ID:hci0 state:up address:00:1B:DC:0F:6E:EF bt-v:2.1
Drives:
Local Storage:total:953.87 GiB used:21.93 GiB (2.3%)
ID-1:/dev/nvme0n1 vendor:Samsung model:MZVKW1T0HMLH-000H1
size:953.87 GiB
Partition:
ID-1:/ size:14.94 GiB used:10.23 GiB (68.5%) fs:xfs dev:/dev/dm-0
ID-2:/boot size:960 MiB used:413.3 MiB (43.1%) fs:xfs
dev:/dev/nvme0n1p2
ID-3:/boot/efi size:598.8 MiB used:11.7 MiB (1.9%) fs:vfat
dev:/dev/nvme0n1p1
ID-4:/home size:99.94 GiB used:11.29 GiB (11.3%) fs:xfs dev:/dev/dm-1
Swap:
ID-1:swap-1 type:zram size:8 GiB used:0 KiB (0.0%) dev:/dev/zram0
Sensors:
Src:lm-sensors+/sys Message:No sensor data found using /sys/class/hwmon
    or lm-sensors.
Info:
Memory:total:16 GiB note:est. available:15.3 GiB used:6.18 GiB (40.4%)
Processes:272 Uptime:5h 50m Shell:Bash inxi:3.3.32
root@rockpi5:~#

What's not working at the moment:
- accelerate GPU

- sound via 3,5 mm Headphone

- Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa 
wireless A8)

Greetings

Andreas

Am 16.02.24 um 7:12 PM schrieb Peter Robinson:
> Hi Folks,
> > It's in my backlog of devices to play with for F-39.
> >
> > It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else?
>
> So I've finally started to look at this and yes, it looks like there's
> issues with the SD card in Linux although apparently it should be
> supported. I will be looking at that over the weekend.
>
> I need to find a spare NVME drive to put in it.
>
> The plan is to have some level of support in Fedora 40.
>
> The upstream status as documented here is a pretty good overview of
> where we're at upstream:
> https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-roc...
> > On Sun, 30 Jul 2023, 13:18 Andreas Reschke,  wrote:
> > > Hi there,
> > > I've tried to install Fedora on my Rock 5 without success.
> > >
> > > Booting with
> > > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> > > on SD-Card and source from
> > > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
> > >
> > > Board boots up fine but later starting in loop with
> > > 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> > > installer errors end ###############
> > > [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > timeout, still waiting for following initqueue hooks:
> > > [  352.161387] dracut-initqueue[1065]: Warning:
> > > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
> > > "/dev/root" ]"
> > > [  352.164564] dracut-initqueue[1065]: Warning:
> > > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
> > > -ge "10" ]"
> > > [  352.167716] dracut-initqueue[1065]: Warning:
> > > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> > > /tmp/settle.done ]"
> > > [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> > > starting timeout scripts
> > > [  352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
> > > installer errors begin #############
> > > [  352.172852] dracut-initqueue[1065]: Warning: #
> > >                                    #
> > > [  352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
> > > has failed. Possible causes include
> > > [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
> > > inst.repo boot parameters on the
> > > [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
> > > verify that you have specified
> > > [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
> > > [  352.173918] dracut-initqueue[1065]: Warning: Please also note that
> > > the 'inst.' prefix is now mandatory.
> > > [  352.174156] dracut-initqueue[1065]: Warning: #
> > >                                    #
> > > [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> > > errors encountered during boot:     ####
> > > [  352.174543] dracut-initqueue[1065]: Warning: #
> > >                                    #
> > > [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> > > [  352.174970] dracut-initqueue[1065]: Warning: #
> > >                                    #
> > >
> > > Full log file: see rock.txt
> > >
> > > Has anybody more succcess ?
> > >
> > > Greetings
> > > Andreas_______________________________________________
> > > arm mailing list [e-mail]
> > > To unsubscribe send an email [e-mail]
> > > Fedora Code of Conduct:https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > > List Guidelines:https://fedoraproject.org/wiki/Mailing_list_guidelines
> > > List Archives:https://lists.fedoraproject.org/archives/list/[e-mail]
> > > Do not reply to spam, report it:https://pagure.io/fedora-infrastructure/new_issue
>
> --
> _______________________________________________
> arm mailing list [e-mail]
> To unsubscribe send an email [e-mail]
> Fedora Code of Conduct:https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines:https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it:https://pagure.io/fedora-infrastructure/new_issue

[Peter Robinson]

> What's not working at the moment:
>
> accelerate GPU
>
> sound via 3,5 mm Headphone

Both of the above are known.
> Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa wireless A8)

And I think that is too because the USB isn't plumbed through to the
M2-E slot yet (see the link I referenced).
> Greetings
>
> Andreas
>
> Am 16.02.24 um 7:12 PM schrieb Peter Robinson:
>
> Hi Folks,
>
> It's in my backlog of devices to play with for F-39.
>
> It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else?
>
> So I've finally started to look at this and yes, it looks like there's
> issues with the SD card in Linux although apparently it should be
> supported. I will be looking at that over the weekend.
>
> I need to find a spare NVME drive to put in it.
>
> The plan is to have some level of support in Fedora 40.
>
> The upstream status as documented here is a pretty good overview of
> where we're at upstream:
> https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-roc...
>
> On Sun, 30 Jul 2023, 13:18 Andreas Reschke,  wrote:
>
> Hi there,
> I've tried to install Fedora on my Rock 5 without success.
>
> Booting with
> https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b...
> on SD-Card and source from
> https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything....
>
> Board boots up fine but later starting in loop with
> 350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
> installer errors end ###############
> [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
> timeout, still waiting for following initqueue hooks:
> [  352.161387] dracut-initqueue[1065]: Warning:
> /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
> "/dev/root" ]"
> [  352.164564] dracut-initqueue[1065]: Warning:
> /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
> -ge "10" ]"
> [  352.167716] dracut-initqueue[1065]: Warning:
> /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
> /tmp/settle.done ]"
> [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
> starting timeout scripts
> [  352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
> installer errors begin #############
> [  352.172852] dracut-initqueue[1065]: Warning: #
>                                   #
> [  352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
> has failed. Possible causes include
> [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
> inst.repo boot parameters on the
> [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
> verify that you have specified
> [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
> [  352.173918] dracut-initqueue[1065]: Warning: Please also note that
> the 'inst.' prefix is now mandatory.
> [  352.174156] dracut-initqueue[1065]: Warning: #
>                                   #
> [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer
> errors encountered during boot:     ####
> [  352.174543] dracut-initqueue[1065]: Warning: #
>                                   #
> [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown
> [  352.174970] dracut-initqueue[1065]: Warning: #
>                                   #
>
> Full log file: see rock.txt
>
> Has anybody more succcess ?
>
> Greetings
> Andreas_______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
>
> --
> _______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
>
> --
> _______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue

[Andreas Reschke]

Am 16.02.24 um 19:36 schrieb Peter Robinson:
> > What's not working at the moment:
> >
> > accelerate GPU
> >
> > sound via 3,5 mm Headphone
>
> Both of the above are known.
> > Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa wireless A8)
>
> And I think that is too because the USB isn't plumbed through to the
> M2-E slot yet (see the link I referenced).
> > Greetings
> >
> > Andreas

Hello Peter,

what does this mean ?

Issue 	SoC 	Rock Pi 5A 	Rock Pi 5B 	EVB1 	Notes

Headphone Jack Playback 	
    |n/a| 	6.6-rc1 	6.4-rc1 	6.8-rc1 	DONE

Sound via 3,5 mm Headphone doesn't work. No soundcard found?

root@rockpi5:~# inxi -A Audio:Message:No device data found. API:ALSA 
v:k6.10.0-0.rc2.20240607git8a92980606e3.28.fc41.aarch64 
status:kernel-api Server-1:PipeWire v:1.1.82 status:active root@rockpi5:~#
> --
> _______________________________________________
> arm mailing list [e-mail]
> To unsubscribe send an email [e-mail]
> Fedora Code of Conduct:https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines:https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it:https://pagure.io/fedora-infrastructure/new_issue

[Peter Robinson]

On Tue, 11 Jun 2024 at 19:22, Andreas Reschke  wrote:
> Am 16.02.24 um 19:36 schrieb Peter Robinson:
>
> What's not working at the moment:
>
> accelerate GPU
>
> sound via 3,5 mm Headphone
>
> Both of the above are known.
> Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa wireless A8)
>
> And I think that is too because the USB isn't plumbed through to the
> M2-E slot yet (see the link I referenced).
>
> Greetings
>
> Andreas
>
> Hello Peter,
>
> what does this mean ?

Can you provide some context? I've no idea what you're asking. You have a
bunch of strings of things but without context for each line.
> Issue SoC Rock Pi 5A Rock Pi 5B EVB1 Notes
>
> Headphone Jack Playback
> n/a 6.6-rc1 6.4-rc1 6.8-rc1 DONE
>
> Sound via 3,5 mm Headphone doesn't work. No soundcard found?
> root@rockpi5:~# inxi -AAudio:  Message: No device data found.  API: ALSA v: k6.10.0-0.rc2.20240607git8a92980606e3.28.fc41.aarch64    status: kernel-api  Server-1: PipeWire v: 1.1.82 status: activeroot@rockpi5:~#
>
> --
> _______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
>
> --
> _______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
> Fedora Code of Conduct:
> https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail]
> Do not reply to spam, report it:
> https://pagure.io/fedora-infrastructure/new_issue