El Wed, 28 Dec 2011 17:54:25 +0000
Niels de Vos <devos(a)fedoraproject.org> escribió:
Hi there!
This patchset contains only cherry-picked patches from Linus' current
tree. Without these patches, the Genesi Smarttop does not recognize
the onboard SSD-chip. The required driver (pata_imx) is already
included in the ARM verion of the kernel, only the bindings with the
board are missing.
Instead of sending all patches in separate emails, I'm attaching them
numbered and all for easy inclusion in the F15 kernel. I have done
local testing and can happily report that the 2.6.41.6-1 kernel can
use the onboard SSD when appying these patches.
I (and other Fedora ARM owners of a Smarttop) appreciate it if these
patches can be included in a next release. Many thanks,
Niels
---
Arnaud Patard (4):
imx51: add pata device
imx51: add pata clock
imx: efika: Enable pata.
Fix pata imx resource
Fabio Estevam (1):
ARM: imx: Add PATA resources for other i.MX processors
Uwe Kleine-König (1):
ARM: mx5: fix remaining inconsistent names for irqs
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/clock-mx51-mx53.c | 7 +-
arch/arm/mach-mx5/devices-imx51.h | 4 +
arch/arm/mach-mx5/devices.c | 10 +-
arch/arm/mach-mx5/mm.c | 8 +-
arch/arm/mach-mx5/mx51_efika.c | 2 +
arch/arm/plat-mxc/devices/Kconfig | 3 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-pata_imx.c | 59 ++++++++
arch/arm/plat-mxc/include/mach/devices-common.h | 8 +
arch/arm/plat-mxc/include/mach/mx35.h | 2 +-
arch/arm/plat-mxc/include/mach/mx51.h | 162
+++++++++++----------- 12 files changed, 175 insertions(+), 92
deletions(-) create mode 100644
arch/arm/plat-mxc/devices/platform-pata_imx.c
Ill get them applied. Im looking to pull the frame buffer bits into the
kernel also so that the smarttop and smartbook will both work in f15
and up.
Dennis