[Fedora-i18n-bugs] [Bug 880494] New: French Keyboard layout not following PC105 (physically same as USA English), and Cannot allocate Eurosymbol as altchar-E or altchar-5
by Red Hat Bugzilla
Product: Fedora
https://bugzilla.redhat.com/show_bug.cgi?id=880494
Bug ID: 880494
Summary: French Keyboard layout not following PC105 (physically
same as USA English), and Cannot allocate Eurosymbol
as altchar-E or altchar-5
Product: Fedora
Version: 18
Component: xkeyboard-config
Severity: low
Priority: unspecified
Reporter: lsatenstein(a)yahoo.com
Description of problem:
There is an annaconda problem, and a keyboard layout definition problem and a
physical keyboard layout problem.
Version-Release number of selected component (if applicable):
Fedora 18 RC1 32bit
How reproducible:
F18 RC1 is being installed with default as English language. But I need the
Canadian French Keyboard, as I write both English and French
I added the Canadian French keyboard and placed it first in the list. Anaconda
continues to ignore the CF keyboard mapping. Only way to force a switch from
the US default was is to delete the USA keyboard, which activates the Cdn
French version and then i added back the USA English.
The USA English physical layout is correct. The Canadian French Keyboard must
look like the USA English (PC105 layout). Missing is what configuration we
could do in the past (F16,F17), which was to allow one to assign the Euro
symbol to the alt-char E, or alt-char 5
So, Anaconda needs some correction to fix what I described, and the keyboard
selection physical layout needs to match the physical layout of the USA English
Steps to Reproduce:
1.
2.
3.
Actual results:
Expected results:
Additional info:
--
You are receiving this mail because:
You are on the CC list for the bug.
9 years, 8 months
[Fedora-i18n-bugs] [Bug 962144] New: [abrt] ibus-m17n-1.3.4-9.fc19: setup_dialog_load_config: Process /usr/libexec/ibus-setup-m17n was killed by signal 11 (SIGSEGV)
by Red Hat Bugzilla
Product: Fedora
https://bugzilla.redhat.com/show_bug.cgi?id=962144
Bug ID: 962144
Summary: [abrt] ibus-m17n-1.3.4-9.fc19:
setup_dialog_load_config: Process
/usr/libexec/ibus-setup-m17n was killed by signal 11
(SIGSEGV)
Product: Fedora
Version: 19
Component: ibus-m17n
Severity: unspecified
Priority: unspecified
Assignee: dueno(a)redhat.com
Reporter: rajuramvani(a)gmail.com
QA Contact: extras-qa(a)fedoraproject.org
CC: dueno(a)redhat.com, i18n-bugs(a)lists.fedoraproject.org,
shawn.p.huang(a)gmail.com
Category: ---
Version-Release number of selected component:
ibus-m17n-1.3.4-9.fc19
Additional info:
reporter: libreport-2.1.4
backtrace_rating: 4
cmdline: /usr/libexec/ibus-setup-m17n --name m17n:gu:inscript
core_backtrace: 7e321984ed79ea1437bf626f007000da7a676ac3 0x2741 main
/usr/libexec/ibus-setup-m17n -
crash_function: setup_dialog_load_config
executable: /usr/libexec/ibus-setup-m17n
kernel: 3.9.1-301.fc19.i686.PAE
runlevel: N 5
uid: 1001
Truncated backtrace:
Thread no. 1 (2 frames)
#0 setup_dialog_load_config at setup.c:319
#1 start at setup.c:635
--
You are receiving this mail because:
You are on the CC list for the bug.
Unsubscribe from this bug https://bugzilla.redhat.com/token.cgi?t=28QgxYASrK&a=cc_unsubscribe
9 years, 8 months
[Fedora-i18n-bugs] [Bug 838734] New: ibus(-anthy?) slow to startup/activate
by Red Hat Bugzilla
https://bugzilla.redhat.com/show_bug.cgi?id=838734
Bug ID: 838734
QA Contact: extras-qa(a)fedoraproject.org
Severity: unspecified
Version: 17
Priority: unspecified
CC: i18n-bugs(a)lists.fedoraproject.org,
shawn.p.huang(a)gmail.com, tagoh(a)redhat.com,
tfujiwar(a)redhat.com
Assignee: tfujiwar(a)redhat.com
Summary: ibus(-anthy?) slow to startup/activate
Regression: ---
Story Points: ---
Classification: Fedora
OS: Unspecified
Reporter: petersen(a)redhat.com
Type: Bug
Documentation: ---
Hardware: Unspecified
Mount Type: ---
Status: NEW
Component: ibus-anthy
Product: Fedora
Description of problem:
Not sure if it is ibus or ibus-anthy but at least ibus-anthy
these days often seems very slow to activate/turn on.
Steps to Reproduce:
1. Activate ibus-anthy for first time in session say
2. start typing immediately
Actual results:
ibus-anthy takes some seconds to activate - often
resulting in my first input not getting converted at all:
eg just now I wanted to write "ありがとう”but actual
input was "ariがとう"...
Expected results:
"ありがとう" and ibus-anthy to activate immediately.
Ueno-san mentioned to me in another context that it might be
loading of ibus-anthy config that is the bottleneck.
Additional info:
This seems like a regression but maybe it is related
to upstream ibus not supporting preloading of IMEs?
Anyway not really sure why ibus-anthy should take so
long to start up.
--
You are receiving this mail because:
You are on the CC list for the bug.
9 years, 9 months
[Fedora-i18n-bugs] [Bug 803583] New: Keyboard layout selection drop down list needs to be more user friendly
by Red Hat Bugzilla
Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.
Summary: Keyboard layout selection drop down list needs to be more user friendly
https://bugzilla.redhat.com/show_bug.cgi?id=803583
Summary: Keyboard layout selection drop down list needs to be
more user friendly
Product: Fedora
Version: 17
Platform: Unspecified
OS/Version: Unspecified
Status: NEW
Severity: unspecified
Priority: unspecified
Component: ibus
AssignedTo: tfujiwar(a)redhat.com
ReportedBy: apeter(a)redhat.com
QAContact: extras-qa(a)fedoraproject.org
CC: tfujiwar(a)redhat.com,
i18n-bugs(a)lists.fedoraproject.org,
shawn.p.huang(a)gmail.com
Classification: Fedora
Story Points: ---
Type: ---
Regression: ---
Mount Type: ---
Documentation: ---
Description of problem:
In Ibus preferences, go to the Input Method and select the option "Show all
input methods", the drop down menu closes, and then need to click again on
"Select an input method" to view those input methods under "Show all input
methods" option.
Version-Release number of selected component (if applicable):
ibus-1.4.99.20120304-3.fc17
How reproducible:
Always
Steps to Reproduce:
1. Go to Ibus->Preferences and select "Input Method" tab.
2. Click on "Select an input method", you can find the "Show all input methods"
option in the drop down menu, click on this option.
3. You can see the drop down list closes and need to click again on "Select an
input method" to view lists under "Show all input methods" option.
Actual results:
Explained above.
Expected results:
When the "Show all input methods" is selected, without closing the drop down
list, other input methods must be listed.
Additional info:
--
Configure bugmail: https://bugzilla.redhat.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
9 years, 9 months
[Fedora-i18n-bugs] [Bug 657684] New: RFE: Request EPEL6 build of Canna.
by Red Hat Bugzilla
Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.
Summary: RFE: Request EPEL6 build of Canna.
https://bugzilla.redhat.com/show_bug.cgi?id=657684
Summary: RFE: Request EPEL6 build of Canna.
Product: Fedora
Version: rawhide
Platform: Unspecified
OS/Version: Unspecified
Status: NEW
Severity: medium
Priority: low
Component: Canna
AssignedTo: tagoh(a)redhat.com
ReportedBy: steve.traylen(a)cern.ch
QAContact: extras-qa(a)fedoraproject.org
CC: tagoh(a)redhat.com, i18n-bugs(a)lists.fedoraproject.org
Classification: Fedora
Hi,
I maintain xemacs in EPEL and I am interested in merging the current Fedora
xemacs
version to EPEL 6.
One missing dependency is Canna.
I just checked and the "devel" version of Canna builds without any
modification on
RHEL6.
Would you be willing and able to maintain an EPEL6 version of Canna?
Steve.
--
Configure bugmail: https://bugzilla.redhat.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
9 years, 10 months
[Fedora-i18n-bugs] [Bug 821221] New: Unable to select input methods under KDE
by Red Hat Bugzilla
Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.
Summary: Unable to select input methods under KDE
https://bugzilla.redhat.com/show_bug.cgi?id=821221
Summary: Unable to select input methods under KDE
Product: Fedora
Version: 17
Platform: i386
OS/Version: Linux
Status: NEW
Severity: high
Priority: unspecified
Component: ibus
AssignedTo: tfujiwar(a)redhat.com
ReportedBy: ed.greshko(a)greshko.com
QAContact: extras-qa(a)fedoraproject.org
CC: tfujiwar(a)redhat.com,
i18n-bugs(a)lists.fedoraproject.org,
shawn.p.huang(a)gmail.com
Classification: Fedora
Story Points: ---
Type: Bug
Regression: ---
Mount Type: ---
Documentation: ---
Description of problem: When KDE is the desktop environment all input methods
are grayed out. So, it is impossible to select any input method.
Version-Release number of selected component (if applicable):
How reproducible: Install Fedora 17 TC-4 LiveKDE to disk. Then add language
support for Japan, Korea, Simplified and Traditional Chinese.
Steps to Reproduce:
1. Install Fedora 17 TC-4 LiveKDE to disk
2. Install language support for Japan, Korea, Simplified and Traditional
Chinese.
3. Install additional ibus input methods if desired
4. Use im-chooser to select ibus
5. Logout/login
6. Go to ibus preferences, Input method tab, check Customize
7. Use pull down menu to pick input methods
Actual results: All input methods are grayed out and not select-able
Expected results: Installed methods should be select-able
Additional info: Also installed Fedora 17 TC-4 from DVD with GNOME and KDE. In
GNOME the input methods can be selected
--
Configure bugmail: https://bugzilla.redhat.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
9 years, 10 months
[Fedora-i18n-bugs] [Bug 984257] New: [abrt] ibus-hunspell-table-0.0.8-3.fc19: main.py:25:<module>:ImportError: No module named ibus
by Red Hat Bugzilla
https://bugzilla.redhat.com/show_bug.cgi?id=984257
Bug ID: 984257
Summary: [abrt] ibus-hunspell-table-0.0.8-3.fc19:
main.py:25:<module>:ImportError: No module named ibus
Product: Fedora
Version: 19
Component: ibus-hunspell-table
Severity: unspecified
Priority: unspecified
Assignee: extras-orphan(a)fedoraproject.org
Reporter: satyendrax(a)gmail.com
QA Contact: extras-qa(a)fedoraproject.org
CC: extras-orphan(a)fedoraproject.org,
i18n-bugs(a)lists.fedoraproject.org
Description of problem:
just restarted gnome
Version-Release number of selected component:
ibus-hunspell-table-0.0.8-3.fc19
Additional info:
reporter: libreport-2.1.5
cmdline: python /usr/share/ibus-hunspell-table/engine/main.py --xml
core_backtrace: dd0890845f09f78080c81e82d9cfbd20766a30fa 0x19 <module>
/usr/share/ibus-hunspell-table/engine/main.py -
executable: /usr/share/ibus-hunspell-table/engine/main.py
kernel: 3.9.5-301.fc19.x86_64
runlevel: N 5
uid: 1000
Truncated backtrace:
main.py:25:<module>:ImportError: No module named ibus
Traceback (most recent call last):
File "/usr/share/ibus-hunspell-table/engine/main.py", line 25, in <module>
import ibus
ImportError: No module named ibus
Local variables in innermost frame:
__builtins__: <module '__builtin__' (built-in)>
__file__: '/usr/share/ibus-hunspell-table/engine/main.py'
__package__: None
sys: <module 'sys' (built-in)>
optparse: <module 'optparse' from '/usr/lib64/python2.7/optparse.pyc'>
__name__: '__main__'
os: <module 'os' from '/usr/lib64/python2.7/os.pyc'>
__doc__: None
--
You are receiving this mail because:
You are on the CC list for the bug.
Unsubscribe from this bug https://bugzilla.redhat.com/token.cgi?t=dsMaHpW03w&a=cc_unsubscribe
9 years, 10 months