Hi Hans, all
Took a bit of time, but managed to do a test with
Fedora-Xfce-armhfp-rawhide-20150128-sda.raw.xz
<
https://kojipkgs.fedoraproject.org//work/tasks/6681/8756681/Fedora-Xfce-a...
I also took the u-boot from that one. Md5sum:
0829a585ac67b135e2a9f0b1a9279c0d u-boot-sunxi-with-spl.bin
I did check both VGA and HDMI but got no output on either ports.
I could ssh into the board with some effort:
The information here:
https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation#FAQ
is incomplete.
I also had to disable selinux (the keys I had did not have an selinux
context)
http://docs.fedoraproject.org/nl-NL/Fedora/11/html/Security-Enhanced_Linu...
I also tried startx but it complained that no screens were found.
fpaste of dmesg:
http://paste.fedoraproject.org/177436/42252728
fpaste of /proc/devices:
http://paste.fedoraproject.org/177437/27367142
If there is any other info you want me to share or additional tests you
want me to do, let me know (might take a day or so before I get to it
though)
Best regards, Frans
2015-01-26 8:33 GMT+01:00 Hans de Goede <hdegoede(a)redhat.com>:
Hi,
On 26-01-15 08:31, Frans Meulenbroeks wrote:
> Apparently this did not make it to the list. Guess this is because my list
> membership was not approved yet then.
>
> 2015-01-25 11:30 GMT+01:00 Frans Meulenbroeks <
> fransmeulenbroeks(a)gmail.com>:
>
> Hi,
>>
>> I was trying to see which of the ARM boards I had lying around would boot
>> FC21.
>> I followed these instructions:
>>
>>
http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation
>>
>> With these I managed to boot FC21 successfully on
>> - orange pi (A20, similar to banana pi)
>> - pandaboard
>> - beaglebone white
>>
>> However, although according to the instructions the same MLO and u-boot
>> are to be used for beaglebone black, it does not boot there, although the
>> very same card works with beaglebone white.
>> I have added a serial port to the BBB and captured the boot log. See at
>> the end of this message.
>> Anyone an idea what is wrong?
>>
>> While at it:
>> According to
>>
http://fedoraproject.org/wiki/Architectures/ARM/F21/
>> Installation/Hardware_Status
>> beagleboard XM also works but there is no u-boot data in the image for
>> XM.
>> Suggestions for this?
>>
>> And I noticed the u-boot dir also contains a u-boot for the Mele A1000. I
>> wanted to try that one the A2000 which is identical hw, but it did not
>> work
>> (and I do not have serial for the A2000)
>> Anyone a suggestion.
>>
>
u-boot & the kernel in F-21 do not support hdmi out on A10 devices, however
rawhide does, so give rawhide a try with the A1000 u-boot (from rawhide)
that should give you video output and hopefully will tell you more.
Regards,
Hans