On Fri, May 9, 2014 at 6:46 AM, Jeffrey Ollie <jeff(a)ocjtech.us> wrote:
I received a BeagleBone Black (rev B) today and naturally wanted to
get Fedora running on it. The Fedora 20 image booted fine, although
after doing a yum update it wouldn't load the kernel anymore, it just
stuck at "starting kernel...". Anyhow, after reading a few of the
threads on this list I though that I'd give rawhide a try. Here's a
log of my latest attempt (I already had a copy of MLO and u-boot.img
from a previous attempt):
To clarify you're using rawhide? It looks from the image name and the
subject it's rawhide, but you mention F-20.
In terms of the uboot your using you explicitly need the one that
comes on the rawhide image so if you had one from an attempt with F-20
that is likely you issue. It may be also that it's using the using the
uboot off the eMMC as the uboot you're reporting below is different to
the header from ours (see below, yours has -dirty and a diff date).
You can use the boot button on the board to tell the BBB to boot using
the mSD rather than eMMC for initial boot.
U-Boot SPL 2014.04 (Apr 23 2014 - 21:16:10)
https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation#For...
I suspect we need to make a note about the uboot boot button here. Can
you confirm if that works for you?
Peter