2015-09-17 14:33 GMT+02:00 Robert Moskowitz <rgm(a)htt-consult.com>:
On 09/17/2015 06:53 AM, Peter Robinson wrote:
> On Wed, Sep 16, 2015 at 10:00 PM, Robert Moskowitz <rgm(a)htt-consult.com>
> wrote:
>
>> I went searching for information on sata port multiplier and found:
>>
>>
http://www.spinics.net/lists/arm-kernel/msg377619.html
>>
>> Is this still the status of this and if so how do I set
>> AHCI_HFLAG_NO_PMP to
>> true?
>>
> Well if you read the message you reference it states:
>
> "So add a module parameter to enable pmp usage, and default this to off,
> so
> that directly attached disks keep working normally."
>
> So it seems if you use a multiple you need to do a different option
> than without so it indicates it would need it. If you do "modinfo
> ahci_sunxi" you'll see that actually the patch has landed and there is
> a enable_pmp parameter. So you'll need to create something like
> /etc/modprobe.d/sunxi.conf and add a line "options ahci_sunxi
> enable_pmp=1" line (no I've not verified that is correct so you'll
> need to check it) and reboot.
>
Ah, thanks! I will try that. I was looking at:
/boot/extlinux/extlinux.conf and adding to the append line something like:
AHCI_HFLAG_NO_PMP=0
So I would have been heading in the wrong direction...
Not entirely, it should also work having ahci_sunxi.enable_pmp=1 on kernel
cmdline.
Also, you may need to rebuild initramfs by running dracut -f after
modifying modprobe.d files.
> Peter
>
> But it seems there were more messages about this...
>>
>>
>> On 09/16/2015 03:34 PM, Robert Moskowitz wrote:
>>
>>> I figured out the various ports on the muitiport card and have 2 sata
>>> drives I am testing with.
>>>
>>> One drive works fine. But two drives it is a bit of a guess which one
>>> will come in as /dev/sda (the mSD card is /dev/mmcblk0). And only one
>>> drive
>>> is visible. Or at least gparted is only seeing one.
>>>
>>> From messages back last fall? I had that this board would let me use
>>> multiple sata drives, so there seems to be something I am missing.
>>>
>>> Right now each item has its own power supply: Cubietruck, Multiport
>>> card,
>>> Drive1, and Drive2. So it is not a power issue (or shouldn't be).
>>>
>>>
>>> _______________________________________________
>>> arm mailing list
>>> arm(a)lists.fedoraproject.org
>>>
https://admin.fedoraproject.org/mailman/listinfo/arm
>>>
>>
>> _______________________________________________
>> arm mailing list
>> arm(a)lists.fedoraproject.org
>>
https://admin.fedoraproject.org/mailman/listinfo/arm
>>
>
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm
--
Pavel Holica