Yes, i used arm-image-installer. I installed the uboot images which have an image for the orange pi zero 2, created the symlink on boards.d to avoid the error and used the correct target, orangepi-zero2 or something like that. No boot. I don't have the UART cable. Will get one soon to check better what's going on.
------- Original Message ------- On Thursday, April 28th, 2022 at 05:29, Sally A.haj sallyahaj@yahoo.com wrote:
Hello there,
I am not sure what is the right way to install Fedora on your board, but usually in Fedora we use https://pagure.io/arm-image-installer
to write ARM images to disks, I can't find your board specifically, which means it hasn't been supported yet, but there are "orangepi_zero, orangepi_zero_plus, and orangepi_zero_plus2" options, which you can choose of as a current solution.
Regards,
Sally
On 4/27/22 01:00, fs 3000 wrote:
Hello guys,
I have a orange pi zero 2 board. With a h616 soc. I have tried dd'ing the .raw file in to microsd card with the Fedora 35 image, even some centos ones. Nothing happens, it doesn't boot. After dd'iong the main image file, i I even tried copying the u-boot file like the centos wiki shows, same result, nothing. dd if=/root/orangepi_zero2/u-boot-sunxi-with-spl.bin of=/dev/sdc bs=1024 seek=8 conv=fsync,notrunc
Is there a way to make fedora or even centos working on this board? That would be great.
Many thanks in advance for any pointers on this. _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure