PXE/DHCP issue on cobbler

[Bon Onlines]

Hello guys,

Can someone take a look at this issue and let me know your ideas?

https://github.com/cobbler/cobbler/issues/1642

[Locane]

Well, I don't know about the Cobbler crash, but I do know that I specify an
adapter in my dhcpd config, and it is therefore in my Cobbler template:

DHCPDARGS="eth0";

You also need to make sure your eth0 has the same subnet mask as your dhcpd
config.

I hope someone else has better input.
On Mar 19, 2016 10:03 AM, "Bon Onlines"  wrote:
> Hello guys,
>
> Can someone take a look at this issue and let me know your ideas?
>
> https://github.com/cobbler/cobbler/issues/1642
> _______________________________________________
> cobbler mailing list
> [e-mail]
> https://lists.fedorahosted.org/admin/lists/[e-mail]

[Bon Onlines]

Hi

I already have added DHCPDRAGS in the config file, however it still does
not work

What do you with the same subnet? Am I missing something here?

I have only one NIC Card and have a public ip, lets say 100.0.0.2/30 so I
can access my server from outside.

What I want to do is to run cobbler and get automation os installation for
my other servers.

so what should I do here?

On Saturday, March 19, 2016, Locane  wrote:
> Well, I don't know about the Cobbler crash, but I do know that I specify
> an adapter in my dhcpd config, and it is therefore in my Cobbler template:
>
> DHCPDARGS="eth0";
>
> You also need to make sure your eth0 has the same subnet mask as your
> dhcpd config.
>
> I hope someone else has better input.
> On Mar 19, 2016 10:03 AM, "Bon Onlines" <[e-mail]
> > wrote:
> > Hello guys,
> >
> > Can someone take a look at this issue and let me know your ideas?
> >
> > https://github.com/cobbler/cobbler/issues/1642
> > _______________________________________________
> > cobbler mailing list
> > [e-mail]
> >
> > https://lists.fedorahosted.org/admin/lists/[e-mail]

[Bon Onlines]

Any one has any idea about this issue?

On Sat, Mar 19, 2016 at 6:37 PM, Bon Onlines  wrote:
> Hi
>
> I already have added DHCPDRAGS in the config file, however it still does not
> work
>
> What do you with the same subnet? Am I missing something here?
>
> I have only one NIC Card and have a public ip, lets say 100.0.0.2/30 so I
> can access my server from outside.
>
> What I want to do is to run cobbler and get automation os installation for
> my other servers.
>
> so what should I do here?
>
> On Saturday, March 19, 2016, Locane  wrote:
> > Well, I don't know about the Cobbler crash, but I do know that I specify
> > an adapter in my dhcpd config, and it is therefore in my Cobbler template:
> >
> > DHCPDARGS="eth0";
> >
> > You also need to make sure your eth0 has the same subnet mask as your
> > dhcpd config.
> >
> > I hope someone else has better input.
> >
> > On Mar 19, 2016 10:03 AM, "Bon Onlines"  wrote:
> > > Hello guys,
> > >
> > > Can someone take a look at this issue and let me know your ideas?
> > >
> > > https://github.com/cobbler/cobbler/issues/1642
> > > _______________________________________________
> > > cobbler mailing list
> > > [e-mail]
> > > https://lists.fedorahosted.org/admin/lists/[e-mail]

[Matt Luettgen]

I believe Dhcpd isn't going to be happy with a single NIC configured with a
public IP that is different than its setup to serve unless you know
something about dhcp that I do not.
On Mar 22, 2016 11:08 AM, "Bon Onlines"  wrote:
> Any one has any idea about this issue?
>
> On Sat, Mar 19, 2016 at 6:37 PM, Bon Onlines  wrote:
> > Hi
> >
> > I already have added DHCPDRAGS in the config file, however it still does
>
> not
> > work
> >
> > What do you with the same subnet? Am I missing something here?
> >
> > I have only one NIC Card and have a public ip, lets say 100.0.0.2/30 so
>
> I
> > can access my server from outside.
> >
> > What I want to do is to run cobbler and get automation os installation
>
> for
> > my other servers.
> >
> > so what should I do here?
> >
> > On Saturday, March 19, 2016, Locane  wrote:
> > > Well, I don't know about the Cobbler crash, but I do know that I specify
> > > an adapter in my dhcpd config, and it is therefore in my Cobbler
>
> template:
> > > DHCPDARGS="eth0";
> > >
> > > You also need to make sure your eth0 has the same subnet mask as your
> > > dhcpd config.
> > >
> > > I hope someone else has better input.
> > >
> > > On Mar 19, 2016 10:03 AM, "Bon Onlines"  wrote:
> > > > Hello guys,
> > > >
> > > > Can someone take a look at this issue and let me know your ideas?
> > > >
> > > > https://github.com/cobbler/cobbler/issues/1642
> > > > _______________________________________________
> > > > cobbler mailing list
> > > > [e-mail]
>
> https://lists.fedorahosted.org/admin/lists/[e-mail]
> _______________________________________________
> cobbler mailing list
> [e-mail]
> https://lists.fedorahosted.org/admin/lists/[e-mail]