Re: What does the default_password_crypted field do?

[Robert Cross]

Joe Linoff wrote:

>  So I ran:
>
>      % openssl passwd -1 'testit'
>      <value>
>
>  and cut-n-pasted the<value>  to the "default_password_crypted:" field in
>  /etc/cobbler/settings and updated everything: 
Doing better than I did then - I
could never get this to work with my 
CentOS 5.5 cobbler server - anytime I tried it cobbler came back 
complaining that the resulting kickstart was corrupt/invalid. In the end 
I generate the password with grub-md5-crypt and that seemed to work fine 
(well, I've done about a dozen test installs since with no problems. :D

>  What does the default_password_crypted field do? 
As the comments in the settings file says, this field contains the 
encrypted password that'll be assigned to root for your newly 
provisioned systems. And the comments also warn you that if don't change 
this then you'll get a warning from the 'check' command - which I 
thought was a nice touch.

HTH, Bob Cross.

What does the default_password_crypted field do?

[Joe Linoff]

Hi Bob:

Thank you for clearing up my confusion about the difference between the
password for the web interface and the clients.

Also, thank you for the tip about grub-md5-crypt. I wasn't aware that I
could use that program as well.

Best regards,

Joe

From: Robert Cross [mailto:[e-mail]] 
Sent: Thursday, January 27, 2011 5:59 AM
To: Joe Linoff; cobbler(a)lists.fedorahosted.org
Subject: Re: What does the default_password_crypted field do?

Joe Linoff wrote:


So I ran:

   % openssl passwd -1 'testit'
   <value>

and cut-n-pasted the <value> to the "default_password_crypted:" field in
/etc/cobbler/settings and updated everything:
Doing better than I did then - I could never get this to work with my
CentOS 5.5 cobbler server - anytime I tried it cobbler came back
complaining that the resulting kickstart was corrupt/invalid. In the end
I generate the password with grub-md5-crypt and that seemed to work fine
(well, I've done about a dozen test installs since with no problems. :D


What does the default_password_crypted field do?

As the comments in the settings file says, this field contains the
encrypted password that'll be assigned to root for your newly
provisioned systems. And the comments also warn you that if don't change
this then you'll get a warning from the 'check' command - which I
thought was a nice touch.

HTH, Bob Cross.

What does the default_password_crypted field do?

[Tim Tass]

I guess along with this topic - I was looking for a way to globally set a default
grub/bootloader password within the cobbler settings file.  Can this be done - or is this
more of a feature enhancement?

Thanks,
-Tim

--- On Thu, 1/27/11, Joe Linoff <jlinoff(a)tabula.com&gt; wrote:

From: Joe Linoff <jlinoff(a)tabula.com&gt;
Subject: RE: What does the default_password_crypted field do?
To: "Robert Cross" <r_l_cross(a)dechro.co.uk&gt;,
cobbler(a)lists.fedorahosted.org
Date: Thursday, January 27, 2011, 12:51 PM

Hi Bob:

Thank you for clearing up my confusion about the difference between the
password for the web interface and the clients.

Also, thank you for the tip about grub-md5-crypt. I wasn't aware that I
could use that program as well.

Best regards,

Joe

From: Robert Cross [mailto:[e-mail]] 
Sent: Thursday, January 27, 2011 5:59 AM
To: Joe Linoff; cobbler(a)lists.fedorahosted.org
Subject: Re: What does the default_password_crypted field do?

Joe Linoff wrote:


So I ran:

   % openssl passwd -1 'testit'
   <value>

and cut-n-pasted the <value> to the "default_password_crypted:" field in
/etc/cobbler/settings and updated everything:
Doing better than I did then - I could never get this to work with my
CentOS 5.5 cobbler server - anytime I tried it cobbler came back
complaining that the resulting kickstart was corrupt/invalid. In the end
I generate the password with grub-md5-crypt and that seemed to work fine
(well, I've done about a dozen test installs since with no problems. :D


What does the default_password_crypted field do?

As the comments in the settings file says, this field contains the
encrypted password that'll be assigned to root for your newly
provisioned systems. And the comments also warn you that if don't change
this then you'll get a warning from the 'check' command - which I
thought was a nice touch.

HTH, Bob Cross.
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/cobbler

What does the default_password_crypted field do?

[Scott Henson]

On Fri, 28 Jan 2011 13:20:31 -0800 (PST), Tim Tass <tptass(a)yahoo.com&gt; wrote:
>  I guess along with this topic - I was looking for a way to globally
> set a default grub/bootloader password within the cobbler settings file.  Can this be done
> - or is this more of a feature enhancement? 
To have it in the cobbler settings file, I believe that would be an
enhancement. You might be able to do via the default ksmeta options
though, but I'd have to look at that to know for sure.

-- 
Scott Henson
Red Hat CIS Operator
WVU Alum BSAE/BSME

What does the default_password_crypted field do?

[Tim Tass]

Thanks I'll take a look and if not I'll look into adding it into the source.  If I
make a change do I just submit the diff to the development forum?  

On Jan 28, 2011, at 4:40 PM, Scott Henson <shenson(a)redhat.com&gt; wrote:

>  On Fri, 28 Jan 2011 13:20:31 -0800 (PST), Tim Tass
> <tptass(a)yahoo.com&gt; wrote:
> > I guess along with this topic - I was looking for a way to globally set a default
> grub/bootloader password within the cobbler settings file.  Can this be done - or is this
> more of a feature enhancement?
>  
>  To have it in the cobbler settings file, I believe that would be an
>  enhancement. You might be able to do via the default ksmeta options
>  though, but I'd have to look at that to know for sure.
>  
>  -- 
>  Scott Henson
>  Red Hat CIS Operator
>  WVU Alum BSAE/BSME

What does the default_password_crypted field do?

[Jennings, Jared L CTR USAF AFMC 46 SK/CCI]

>  To have it in the cobbler settings file, I believe that would be an
>  enhancement. You might be able to do via the default ksmeta options
>  though, but I'd have to look at that to know for sure.
>  
Yeah, at our site we have a grub_password in the ksmeta, like so -

cobbler profile edit --name=Fedora12-x86_64
--ksmeta='grub_password="$1$JUnkSAlt$OEQRO!U#@RHO#Rhu(a)#RU."'

And in the kickstart file:

bootloader --location=mbr --md5pass=$grub_password

It's important to get the quoting right for the ksmeta when changing the grub password
from a command line, because of the $ signs. If you get it wrong, your kickstart ends up
saying --md5pass=$!U. or some such, and then your grub is far more secure than you
bargained for :)

What does the default_password_crypted field do?

[Dylan Swift]

Hi Tim,

On 28 January 2011 21:20, Tim Tass <tptass(a)yahoo.com&gt; wrote:

>  I guess along with this topic - I was looking for a way to globally
> set a
>  default grub/bootloader password within the cobbler settings file.  Can this
>  be done - or is this more of a feature enhancement?
>
>  Thanks,
>  -Tim
>  
I believe you need to use the kickstart directive:

bootloader --password=

The bootloader directive should be in the kickstart file already - it is a
compulsory directive as far as I know.

HTH

Dylan