Re: Re: Error during configuration

[Colin Coe]

and send to list...

On Tue, Oct 16, 2012 at 11:03 AM, Colin Coe <colin.coe(a)gmail.com&gt; wrote:

>  Hi all
>
>  This is still a problem under Katello v1.1.
>
>  (RHEL 6.3 fully updated)
>
>  Thanks
>
>  CC
>
>
>  On Fri, Oct 5, 2012 at 7:23 AM, Colin Coe <colin.coe(a)gmail.com&gt; wrote:
>
> > Hi Mike
> >
> > Yeah, I should have provided that catalina.out at the least.
> >
> > Thanks
> >
> > CC
> >
> > On Fri, Oct 5, 2012 at 12:39 AM, Mike McCune <mmccune(a)redhat.com&gt; wrote:
> >
> >> I didn't think you were on the list since I had to approve your post,
> >> figured I'd forward my reply.
> >>
> >>
> >> -------- Original Message --------
> >> Subject: Re: Error during configuration
> >> Date: Thu, 04 Oct 2012 05:52:47 -0700
> >> From: Mike McCune <mmccune(a)redhat.com&gt;
> >> Reply-To: katello(a)lists.fedorahosted.org
> >> To: katello(a)lists.fedorahosted.org
> >>
> >> On 10/02/2012 10:14 PM, Colin Coe wrote:
> >>
> >>> Hi all
> >>>
> >>> I seem to be hitting the same problem as mentioned in
> >>>
> https://bugzilla.redhat.com/**show_bug.cgi?id=854732<https://bugzilla....
> >>>
> >>> One of the follow up comments points at an incompatibility with IBMs
> >>> Java package.  Looking into this, it seems liquibase is to blame as it
> >>> requires 'java' and so IBMs Java 1.7.0 gets installed.
> >>>
> >>> I've manually installed java-1.7.0-openjdk and removed java-1.7.0-ibm
> >>> but I'm still getting errors.
> >>>
> >>> I'm on a RHEL6.3 (fully updated) VM (RHEV 3.0.5).
> >>>
> >>> ---
> >>> Starting Katello configuration
> >>> The top-level log file is
> >>> [/var/log/katello/katello-**configure-20121003-130852/**main.log]
> >>> err: /Stage[main]/Candlepin::**Service/Exec[cpinit]/returns: change
> >>> from
> >>> notrun to 0 failed: /usr/bin/wget --timeout=30 --tries=5
> >>> --retry-connrefused -qO-
> http://localhost:8080/**candlepin/admin/init<http://localhost:8080/can...
> >>>  >/var/log/katello/katello-**configure/cpinit.log 2>&1 &&
> touch
> >>> /var/lib/katello/cpinit_done returned 8 instead of one of [0] at
> >>> /usr/share/katello/install/**puppet/modules/candlepin/**
> >>> manifests/service.pp:20
> >>> ---
> >>>
> >>>
> >>> Any ideas?
> >>>
> >>> Thanks
> >>>
> >>> CC
> >>>
> >>>
> >> any way you could share with us (or me privately if you don't want to
> >> send it to the list) the output of /usr/share/katello/script/**
> >> katello-debug?
> >>
> >> I'd also look at your /var/log/tomcat6/catalina.out to see if there are
> >> some large stack traces that are generated during the above
> >> configuration steps.
> >>
> >> Mike
> >> --
> >> Mike McCune
> >> mmccune AT redhat.com
> >> Red Hat Engineering       | Portland, OR
> >> Systems Management        | 650-254-4248
> >> ______________________________**_________________
> >> katello mailing list
> >> katello(a)lists.fedorahosted.org
> >>
> https://lists.fedorahosted.**org/mailman/listinfo/katello<https://list...
> >>
> >
> >
> >
> > --
> > RHCE#805007969328369
> >
>
>
>
>  --
>  RHCE#805007969328369
>  


-- 
RHCE#805007969328369

Error during configuration

[Lukas Zapletal]

Do you have the katello-debug output attached somewhere?

Can you paste catalina.out at least? I dont see it in the thread.

Thanks!

On Tue, Oct 16, 2012 at 11:04:29AM +0800, Colin Coe wrote:
>  and send to list...
>  
>  On Tue, Oct 16, 2012 at 11:03 AM, Colin Coe <colin.coe(a)gmail.com&gt; wrote:
>  
>  > Hi all
>  >
>  > This is still a problem under Katello v1.1.
>  >
>  > (RHEL 6.3 fully updated)
>  >
>  > Thanks
>  >
>  > CC
>  >
>  >
>  > On Fri, Oct 5, 2012 at 7:23 AM, Colin Coe <colin.coe(a)gmail.com&gt; wrote:
>  >
>  >> Hi Mike
>  >>
>  >> Yeah, I should have provided that catalina.out at the least.
>  >>
>  >> Thanks
>  >>
>  >> CC
>  >>
>  >> On Fri, Oct 5, 2012 at 12:39 AM, Mike McCune <mmccune(a)redhat.com&gt; wrote:
>  >>
>  >>> I didn't think you were on the list since I had to approve your post,
>  >>> figured I'd forward my reply.
>  >>>
>  >>>
>  >>> -------- Original Message --------
>  >>> Subject: Re: Error during configuration
>  >>> Date: Thu, 04 Oct 2012 05:52:47 -0700
>  >>> From: Mike McCune <mmccune(a)redhat.com&gt;
>  >>> Reply-To: katello(a)lists.fedorahosted.org
>  >>> To: katello(a)lists.fedorahosted.org
>  >>>
>  >>> On 10/02/2012 10:14 PM, Colin Coe wrote:
>  >>>
>  >>>> Hi all
>  >>>>
>  >>>> I seem to be hitting the same problem as mentioned in
>  >>>>
> https://bugzilla.redhat.com/**show_bug.cgi?id=854732<https://bugzilla....
>  >>>>
>  >>>> One of the follow up comments points at an incompatibility with IBMs
>  >>>> Java package.  Looking into this, it seems liquibase is to blame as it
>  >>>> requires 'java' and so IBMs Java 1.7.0 gets installed.
>  >>>>
>  >>>> I've manually installed java-1.7.0-openjdk and removed
> java-1.7.0-ibm
>  >>>> but I'm still getting errors.
>  >>>>
>  >>>> I'm on a RHEL6.3 (fully updated) VM (RHEV 3.0.5).
>  >>>>
>  >>>> ---
>  >>>> Starting Katello configuration
>  >>>> The top-level log file is
>  >>>> [/var/log/katello/katello-**configure-20121003-130852/**main.log]
>  >>>> err: /Stage[main]/Candlepin::**Service/Exec[cpinit]/returns: change
>  >>>> from
>  >>>> notrun to 0 failed: /usr/bin/wget --timeout=30 --tries=5
>  >>>> --retry-connrefused -qO-
> http://localhost:8080/**candlepin/admin/init<http://localhost:8080/can...
>  >>>>  >/var/log/katello/katello-**configure/cpinit.log 2>&1
> && touch
>  >>>> /var/lib/katello/cpinit_done returned 8 instead of one of [0] at
>  >>>> /usr/share/katello/install/**puppet/modules/candlepin/**
>  >>>> manifests/service.pp:20
>  >>>> ---
>  >>>>
>  >>>>
>  >>>> Any ideas?
>  >>>>
>  >>>> Thanks
>  >>>>
>  >>>> CC
>  >>>>
>  >>>>
>  >>> any way you could share with us (or me privately if you don't want to
>  >>> send it to the list) the output of /usr/share/katello/script/**
>  >>> katello-debug?
>  >>>
>  >>> I'd also look at your /var/log/tomcat6/catalina.out to see if there are
>  >>> some large stack traces that are generated during the above
>  >>> configuration steps.
>  >>>
>  >>> Mike
>  >>> --
>  >>> Mike McCune
>  >>> mmccune AT redhat.com
>  >>> Red Hat Engineering       | Portland, OR
>  >>> Systems Management        | 650-254-4248
>  >>> ______________________________**_________________
>  >>> katello mailing list
>  >>> katello(a)lists.fedorahosted.org
>  >>>
> https://lists.fedorahosted.**org/mailman/listinfo/katello<https://list...
>  >>>
>  >>
>  >>
>  >>
>  >> --
>  >> RHCE#805007969328369
>  >>
>  >
>  >
>  >
>  > --
>  > RHCE#805007969328369
>  >
>  
>  
>  
>  -- 
>  RHCE#805007969328369 
>  _______________________________________________
>  katello mailing list
>  katello(a)lists.fedorahosted.org
>  https://lists.fedorahosted.org/mailman/listinfo/katello 

-- 
Later,

 Lukas "lzap" Zapletal
 #katello #systemengine

Error during configuration

[Colin Coe]

replied with katello-debug off list

On Tue, Oct 16, 2012 at 7:17 PM, Lukas Zapletal <lzap+pub(a)redhat.com&gt; wrote:
>  Do you have the katello-debug output attached somewhere?
>
>  Can you paste catalina.out at least? I dont see it in the thread.
>
>  Thanks!
>
>  On Tue, Oct 16, 2012 at 11:04:29AM +0800, Colin Coe wrote:
> > and send to list...
> >
> > On Tue, Oct 16, 2012 at 11:03 AM, Colin Coe <colin.coe(a)gmail.com&gt; wrote:
> >
> > > Hi all
> > >
> > > This is still a problem under Katello v1.1.
> > >
> > > (RHEL 6.3 fully updated)
> > >
> > > Thanks
> > >
> > > CC
> > >
> > >
> > > On Fri, Oct 5, 2012 at 7:23 AM, Colin Coe <colin.coe(a)gmail.com&gt; wrote:
> > >
> > >> Hi Mike
> > >>
> > >> Yeah, I should have provided that catalina.out at the least.
> > >>
> > >> Thanks
> > >>
> > >> CC
> > >>
> > >> On Fri, Oct 5, 2012 at 12:39 AM, Mike McCune <mmccune(a)redhat.com&gt;
> wrote:
> > >>
> > >>> I didn't think you were on the list since I had to approve your
> post,
> > >>> figured I'd forward my reply.
> > >>>
> > >>>
> > >>> -------- Original Message --------
> > >>> Subject: Re: Error during configuration
> > >>> Date: Thu, 04 Oct 2012 05:52:47 -0700
> > >>> From: Mike McCune <mmccune(a)redhat.com&gt;
> > >>> Reply-To: katello(a)lists.fedorahosted.org
> > >>> To: katello(a)lists.fedorahosted.org
> > >>>
> > >>> On 10/02/2012 10:14 PM, Colin Coe wrote:
> > >>>
> > >>>> Hi all
> > >>>>
> > >>>> I seem to be hitting the same problem as mentioned in
> > >>>>
> https://bugzilla.redhat.com/**show_bug.cgi?id=854732<https://bugzilla....
> > >>>>
> > >>>> One of the follow up comments points at an incompatibility with
> IBMs
> > >>>> Java package.  Looking into this, it seems liquibase is to blame as
> it
> > >>>> requires 'java' and so IBMs Java 1.7.0 gets installed.
> > >>>>
> > >>>> I've manually installed java-1.7.0-openjdk and removed
> java-1.7.0-ibm
> > >>>> but I'm still getting errors.
> > >>>>
> > >>>> I'm on a RHEL6.3 (fully updated) VM (RHEV 3.0.5).
> > >>>>
> > >>>> ---
> > >>>> Starting Katello configuration
> > >>>> The top-level log file is
> > >>>> [/var/log/katello/katello-**configure-20121003-130852/**main.log]
> > >>>> err: /Stage[main]/Candlepin::**Service/Exec[cpinit]/returns: change
> > >>>> from
> > >>>> notrun to 0 failed: /usr/bin/wget --timeout=30 --tries=5
> > >>>> --retry-connrefused -qO-
> http://localhost:8080/**candlepin/admin/init<http://localhost:8080/can...
> > >>>>  >/var/log/katello/katello-**configure/cpinit.log 2>&1
> && touch
> > >>>> /var/lib/katello/cpinit_done returned 8 instead of one of [0] at
> > >>>> /usr/share/katello/install/**puppet/modules/candlepin/**
> > >>>> manifests/service.pp:20
> > >>>> ---
> > >>>>
> > >>>>
> > >>>> Any ideas?
> > >>>>
> > >>>> Thanks
> > >>>>
> > >>>> CC
> > >>>>
> > >>>>
> > >>> any way you could share with us (or me privately if you don't want
> to
> > >>> send it to the list) the output of /usr/share/katello/script/**
> > >>> katello-debug?
> > >>>
> > >>> I'd also look at your /var/log/tomcat6/catalina.out to see if there
> are
> > >>> some large stack traces that are generated during the above
> > >>> configuration steps.
> > >>>
> > >>> Mike
> > >>> --
> > >>> Mike McCune
> > >>> mmccune AT redhat.com
> > >>> Red Hat Engineering       | Portland, OR
> > >>> Systems Management        | 650-254-4248
> > >>> ______________________________**_________________
> > >>> katello mailing list
> > >>> katello(a)lists.fedorahosted.org
> > >>>
> https://lists.fedorahosted.**org/mailman/listinfo/katello<https://list...
> > >>>
> > >>
> > >>
> > >>
> > >> --
> > >> RHCE#805007969328369
> > >>
> > >
> > >
> > >
> > > --
> > > RHCE#805007969328369
> > >
> >
> >
> >
> > --
> > RHCE#805007969328369
>
> > _______________________________________________
> > katello mailing list
> > katello(a)lists.fedorahosted.org
> > https://lists.fedorahosted.org/mailman/listinfo/katello
>
>
>  --
>  Later,
>
>   Lukas "lzap" Zapletal
>   #katello #systemengine
>  _______________________________________________
>  katello mailing list
>  katello(a)lists.fedorahosted.org
>  https://lists.fedorahosted.org/mailman/listinfo/katello 


-- 
RHCE#805007969328369