No interface detected!
by Jairaj Menon
I am new to xen and trying to setup the same on a fc4 base. I would like
to setup two guest OS on xen FC3 and FC4.
I blindly followed fedoraXenQuickstart url and installed FC3
base...everything worked fine so far ...i was able to initialize my FC3
guest OS as well...but it shows no network interface.
Can anyone help me to understand how can i bring the my FC3 guest OS on
the network.. ?
Any help would be appreciated!
Thanks.
Jairaj Menon
18 years, 2 months
Invalid source specified.
by Murali D
I am getting " Invalid source specified" even after giving the correct disk
image path for "What would you like to use as the disk (path)?"
The following was the result... what is the reason for " Invalid source
specified. "
[root@ccluster ~]# /usr/sbin/xenguest-install.py
What is the name of your virtual machine? asdf1
How much RAM should be allocated (in megabytes)? 512
What would you like to use as the disk (path)? /home/vmachine1/asdfg
How large would you like the disk to be (in gigabytes)? 4
Invalid source specified. Please specify an NFS, HTTP, or FTP install
source
What is the install location? http://ccluster/vmachine1
http://ccluster/vmachine1
Traceback (most recent call last):
File "/usr/sbin/xenguest-install.py", line 365, in ?
main()
File "/usr/sbin/xenguest-install.py", line 356, in main
start_paravirt_install(name, ram, disk, mac, src, options.extra)
File "/usr/sbin/xenguest-install.py", line 232, in start_paravirt_install
(kfn, ifn) = get_paravirt_install_image(src)
File "/usr/sbin/xenguest-install.py", line 196, in
get_paravirt_install_image
kernel = grabber.urlopen("%s/images/xen/vmlinuz" %(src,))
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 444,
in urlopen
return default_grabber.urlopen(url, **kwargs)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 575,
in urlopen
return self._retry(opts, retryfunc, url)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 547,
in _retry
return apply(func, (opts,) + args, {})
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 574,
in retryfunc
return URLGrabberFileObject(url, filename=None, opts=opts)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 728,
in __init__
self._do_open()
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 820,
in _do_open
fo, hdr = self._make_request(req, opener)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 902,
in _make_request
raise URLGrabError(4, _('IOError: %s') % (e, ))
urlgrabber.grabber.URLGrabError: [Errno 4] IOError: HTTP Error 404: Date:
Wed, 15 Feb 2006 13:57:57 GMT
Server: Apache/2.2.0 (Fedora)
Content-Length: 299
Connection: close
Content-Type: text/html; charset=iso-8859-1
Murali
18 years, 2 months
Invalid source specified
by Murali D
I am getting " Invalid source specified" even after giving the correct disk
image path for "What would you like to use as the disk (path)?"
The following was the result... what is the reason for " Invalid source
specified. "
How much RAM should be allocated (in megabytes)? 400
What would you like to use as the disk (path)? /home/joe/file1
Invalid source specified. Please specify an NFS, HTTP, or FTP install
source
What is the install location?
18 years, 2 months
Fwd: rawhide report: 20060214 changes
by Daniel Veillard
For those not on the devel/tester list or who may have missed it:
> Date: Tue, 14 Feb 2006 03:39:43 -0500
> From: Build System <buildsys(a)redhat.com>
> Subject: rawhide report: 20060214 changes
> To: fedora-devel-list(a)redhat.com, fedora-test-list(a)redhat.com
> Cc:
>
> Removed package kernel-xen
>
[snip]
> kernel-2.6.15-1.1948_FC5
> ------------------------
> * Mon Feb 13 2006 Rik van Riel <riel(a)redhat.com>
> - go with the SMP workaround from Hubertus
>
> * Mon Feb 13 2006 Dave Jones <davej(a)redhat.com>
> - 2.6.16rc3-git1
> - Merge kernel-xen back to kernel.
>
> * Mon Feb 13 2006 Juan Quintela <quintela(a)redhat.com>
> - rebase rawhide 1.1941.
i.e. at this point the Rawhide default kernel integrates the Xen support
I guess this mean Xen will be more widely used in Fedora Core 5 deployements.
This list also reached 150 subscribers today !
Daniel
--
Daniel Veillard | Red Hat http://redhat.com/
veillard(a)redhat.com | libxml GNOME XML XSLT toolkit http://xmlsoft.org/
http://veillard.com/ | Rpmfind RPM search engine http://rpmfind.net/
18 years, 2 months
fsck.ext3 -a /dev/hda1
by Chitlesh GOORAH
Hello, there,
I have been following the howto from
http://fedoraproject.org/wiki/FedoraCore5XenQuickstart on Fedora Core
5 Test 2.
in my grub.conf I added init 3, but each time it reboots my machine.
So i followed the rest of the tutorial in init 5.
I have even replace all sda1 by hda1 when applicable since my fdisk -l is
[root@goorah ~]# fdisk -l
Disk /dev/hda: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 132 4870 38066017+ 83 Linux
/dev/hda2 1 131 1052226 82 Linux swap / Solaris
Otherwise I did (i think) everything.
If I do xm create -c fedora-guest1, It will end each time with:
awk: cmd. line:1: fatal: cannot open file `/proc/mounts' for reading
(No such file or directory)
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock : Sat Feb 11 11:11:31 EST 2006 [ OK ]
cat: /proc/cmdline: No such file or directory
mount: mount point /dev/pts does not exist
Setting hostname localhost: [ OK ]
raidautorun: unable to autocreate /dev/md0
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1
ext2fs_check_if_mount: No such file or directory while determining
whether /dev/hda1 is mounted.
fsck.ext3: No such file or directory while trying to open /dev/hda1
/dev/hda1:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
[FAILED]
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Press enter for maintenance
(or type Control-D to continue):
(Repair filesystem) 1 # exit
Unmounting file systems
warning: can't open /etc/mtab: No such file or directory
umount: cannot find list of filesystems to unmount
Automatic reboot in progress.
Restarting system.
do it have to do with the replacement of sda1 with hda1 ?
by the way
[root@goorah ~]# uname -r
2.6.15-1.51_FC5hypervisor
Chitlesh GOORAH
--
http://clunixchit.blogspot.com
18 years, 2 months
xen for x86_64 in FC5
by Axel Thimm
Hi,
a couple of days ago Jeremy mentioned that xen for x86_64 may or may
not make it into FC5. Given that the freeze for FC5t3 is on Monday, is
there yet any chance for x86_64 support in FC5? If it doesn't make it
to the release, would it be offered as an update to FC5?
Thanks!
--
Axel.Thimm at ATrpms.net
18 years, 2 months
Howto build the different guest OS???
by Danny_Trinh@Dell.com
Hello group,
I have tested FC5 test 2 and xen. All ran very good. I want to take a
further test that runs on a different OS guest (i.e. running FC4 guest
OS on FC5 test2 hypervisor), but I didn't know howto build the guest OS
yet.
Can you guys show me how? Or can you point me to somw urls that have
some instructions/hints/howto build the OS guests?
Thanks in advance for your help,
Best regards,
Danny Trinh
512-723-6445
CNE, MCSE, RHCE, LPIC1, A+
Senior Analyst
PG Enterprise Linux Solutions
Dell Inc.
18 years, 2 months
cman,dlm and xen guest
by Shashin Shinde
Hello Friday ,
Using FC5 Test2 I have setup xen to run with 3 guests , also FC5 Test2.
I would like to test and install Cluster Suite/GFS in my guests.
At present there are no cman-kernel-xen-* , dlm-kernel-xen-*
rpms available. Any ideas where I can get them if someone has
built them already ?
If not , may I have some simple set of instructions or howto to build them
for my testing purposes ?
Thanks for any help.
Regards ,
Shashin Shinde.
--
EMEA Global Professional Services
Red Hat Munich
Mobile: +49 (0)173 320 0830 Tel: +49 (0)89 205071 210
18 years, 2 months
Hang when starting xenU using riel's packages
by Yip Wai Peng
Hi all,
I am using kernel-xenU, kernel-xen0, and xen-3 from
http://people.redhat.com/~riel/xen_for_fc4/. xen0 boots up fine, but when I
start xenU, it hangs at the below screen. I have already moved /lib/tls out
of the way.
---------
***************************************************************
***************************************************************
** WARNING: Currently emulating unsupported memory accesses **
** in /lib/tls libraries. The emulation is very **
** slow. To ensure full performance you should **
** execute the following as root: **
** mv /lib/tls /lib/tls.disabled **
** Offending process: init (pid=1) **
***************************************************************
***************************************************************
Continuing...
----------
My xen config file is as follows:
kernel ="/boot/vmlinuz-2.6.12-1.1454_FC4xenU"
memory = 128
name = "waipeng"
nics = 1
disk = ['phy:/servers/waipeng,hda1,w']
root = "/dev/hda1"
extra = "ro selinux=0 3
The log shows this:
[2006-01-19 23:43:17 xend] DEBUG (image:156) initDomain: cpu=-1 mem_kb=131072
ssidref=-1 dom=3
[2006-01-19 23:43:17 xend] DEBUG (XendDomainInfo:843) init_domain> Created
domain=3 name=waipeng memory=128
[2006-01-19 23:43:17 xend] INFO (XendRoot:141) EVENT> xend.domain.create
['waipeng', 3]
[2006-01-19 23:43:17 xend] INFO (image:217) buildDomain os=linux dom=3 vcpus=1
[2006-01-19 23:43:17 xend] DEBUG (image:255) dom = 3
[2006-01-19 23:43:17 xend] DEBUG (image:256) image
= /boot/vmlinuz-2.6.12-1.1454_FC4xenU
[2006-01-19 23:43:17 xend] DEBUG (image:257) store_evtchn = 1
[2006-01-19 23:43:17 xend] DEBUG (image:258) console_evtchn = 2
[2006-01-19 23:43:17 xend] DEBUG (image:259) cmdline = root=/dev/hda1
ro selinux=0 3
[2006-01-19 23:43:17 xend] DEBUG (image:260) ramdisk =
[2006-01-19 23:43:17 xend] DEBUG (image:261) flags = 0
[2006-01-19 23:43:17 xend] DEBUG (image:262) vcpus = 1
[2006-01-19 23:43:17 xend] INFO (xsobj:326) DBMap>introduceDomain> 3 59700
<EventChannel dom1:0:17
dom2:3:1> /domain/499d6865-9920-4f87-bc34-6fd4b1933bb3
[2006-01-19 23:43:17 xend] DEBUG (XendDomainInfo:698) writing key
availability=online to path /cpu/0 in store
[2006-01-19 23:43:17 xend] WARNING (XendDomainInfo:1100) Unknown config field
boot
[2006-01-19 23:43:17 xend] ERROR (XendDomainInfo:443) ['vif', ['mac',
'aa:00:00:7d:9a:01']]
[2006-01-19 23:43:17 xend] INFO (XendRoot:141) EVENT> xend.domain.unpause
['waipeng', 3]
Questions:
1) Anybody have encountered this before? How did you managed to solve this?
2) Does the mac error matters? Why is it there in the first place?
I would appreciate any help given. Thanks!
Wai Peng
18 years, 2 months