Hi Thomas,
Did your Xen0 is EM64T (IA32E)?
Could you try with opening acpi=1 and apic=1 in the HVM config file.
Best Regards,
Yongkang (Kangkang) 永康
________________________________
From: fedora-xen-bounces(a)redhat.com [mailto:fedora-xen-bounces@redhat.com] On Behalf Of
thomas.vonsteiger(a)bluewin.ch
Sent: 2006年5月13日 14:57
To: fedora-xen(a)redhat.com
Subject: [Fedora-xen] Can not boot vm guest rhel4 with smp kernel on FC5with vt enabled
hardware (Intel)
Hi,
I have running rhel4 vm guest on fc5 on VT hardware.
Becose i can boot only with single core kernel 2.6.9-34.EL
If I try to boot kernel-smp 2.6.9-34.EL with vcpus 2, boot is hanging by..
“Uncompressing Linux … Ok, booting the kernel.”
There is no errors, no output on serial console.
Anyone see the same effect ?
I using this config:
# Automatically generated xen config file
name = "rhel4_2"
builder = "hvm"
memory = "256"
acpi = 0
apic = 0
pea = 0
vcpus = 2
disk = [ 'phy:/dev/datavg/xenRHEL4_2,ioemu:hda,w' ]
vif = [ 'type=ioemu,bridge=xenbr0,mac=00:16:3e:09:e8:e0' ]
on_reboot = 'restart'
on_crash = 'restart'
kernel = '/usr/lib/xen/boot/hvmloader'
device_model = '/usr/lib/xen/bin/qemu-dm'
#cdrom = '/archiv/iso/RHEL4-U3-i386-AS-disc1.iso'
boot = 'c'
sdl = 0 # use SDL for graphics
vnc = 1 # use VNC for graphics
vncviewer = 0 # spawn vncviewer by default
nographic = 0 # don't use graphics
serial='pty' # enable serial console
regards,
thomas
Show replies by date
Hi Yongkang,
acpi=1 and apic=1 is not working, it’s the same problem.
My Xen0 is IA32 FC5.
Hardware is Pentium D 930 with motherboard D955XBK with EM64T.
Is this a problem if i run i386 and not x86_64 ?
I get the same problem if I try to start Redhat 7.2, single core is running, smp core is
not running.
regards,
Thomas
_____
Von: You, Yongkang [mailto:yongkang.you@intel.com]
Gesendet: Sonntag, 14. Mai 2006 02:04
An: thomas.vonsteiger(a)bluewin.ch; fedora-xen(a)redhat.com
Betreff: RE: [Fedora-xen] Can not boot vm guest rhel4 with smp kernel on FC5with vt
enabled hardware (Intel)
Hi Thomas,
Did your Xen0 is EM64T (IA32E)?
Could you try with opening acpi=1 and apic=1 in the HVM config file.
Best Regards,
Yongkang (Kangkang) 永康
_____
From: fedora-xen-bounces(a)redhat.com [mailto:fedora-xen-bounces@redhat.com] On Behalf Of
thomas.vonsteiger(a)bluewin.ch
Sent: 2006年5月13日 14:57
To: fedora-xen(a)redhat.com
Subject: [Fedora-xen] Can not boot vm guest rhel4 with smp kernel on FC5with vt enabled
hardware (Intel)
Hi,
I have running rhel4 vm guest on fc5 on VT hardware.
Becose i can boot only with single core kernel 2.6.9-34.EL
If I try to boot kernel-smp 2.6.9-34.EL with vcpus 2, boot is hanging by..
“Uncompressing Linux … Ok, booting the kernel.”
There is no errors, no output on serial console.
Anyone see the same effect ?
I using this config:
# Automatically generated xen config file
name = "rhel4_2"
builder = "hvm"
memory = "256"
acpi = 0
apic = 0
pea = 0
vcpus = 2
disk = [ 'phy:/dev/datavg/xenRHEL4_2,ioemu:hda,w' ]
vif = [ 'type=ioemu,bridge=xenbr0,mac=00:16:3e:09:e8:e0' ]
on_reboot = 'restart'
on_crash = 'restart'
kernel = '/usr/lib/xen/boot/hvmloader'
device_model = '/usr/lib/xen/bin/qemu-dm'
#cdrom = '/archiv/iso/RHEL4-U3-i386-AS-disc1.iso'
boot = 'c'
sdl = 0 # use SDL for graphics
vnc = 1 # use VNC for graphics
vncviewer = 0 # spawn vncviewer by default
nographic = 0 # don't use graphics
serial='pty' # enable serial console
regards,
thomas