If I do a install using -p things work great, no issues, have 8+ virtuals created around
using para and even on my fully virtual enabled server, I can create a guest without issue
using paravirtual.
If i do the same install but use the config switch -v (full virtualization) the install
dumps me back saying i can reconnect but I can't.
Attempted creation:
[root@devxen xen]# /usr/bin/virt-install --debug -n trub -r 1000 -m 00:16:3e:41:71:d1
--nographics --os-type=linux --os-variant=fedora6 -l /virtual.img -f /dev/mapper/dev-trub
--noapic --noacpi --arch=i686
Would you like a fully virtualized guest (yes or no)? This will allow you to run
unmodified operating systems. y
Tue, 29 Apr 2008 14:25:34 DEBUG Path is block file: Assuming Block disk type.
Starting install...
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByUUID
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Tue, 29 Apr 2008 14:25:35 DEBUG Creating guest from '<domain
type='xen'>
<name>trub</name>
<currentMemory>1024000</currentMemory>
<memory>1024000</memory>
<uuid>dd0a4cef-ce10-b268-fa3f-5e44e4ac346c</uuid>
<os>
<type arch='i686'>hvm</type>
<loader>/usr/lib/xen/boot/hvmloader</loader>
<boot dev='cdrom'/>
</os>
<features>
<apic/><acpi/><pae/>
</features>
<on_poweroff>destroy</on_poweroff>
<on_reboot>destroy</on_reboot>
<on_crash>destroy</on_crash>
<vcpu>1</vcpu>
<devices>
<emulator>/usr/lib/xen/bin/qemu-dm</emulator>
<console device='pty'/>
<disk type='block' device='disk'>
<source dev='/dev/mapper/dev-trub'/>
<target dev='hda'/>
</disk>
<disk type='file' device='cdrom'>
<source file='/virtual.img'/>
<target dev='hdc'/>
<readonly/>
</disk>
<interface type='bridge'>
<source bridge='xenbr0'/>
<mac address='00:16:3e:41:71:d1'/>
</interface>
</devices>
</domain>
'
Creating domain... 0 B 00:01
Tue, 29 Apr 2008 14:25:36 DEBUG Created guest, looking to see if it is running
Tue, 29 Apr 2008 14:25:36 DEBUG Launching console callback
Tue, 29 Apr 2008 14:25:36 DEBUG Saving XML boot config '<domain
type='xen'>
<name>trub</name>
<currentMemory>1024000</currentMemory>
<memory>1024000</memory>
<uuid>dd0a4cef-ce10-b268-fa3f-5e44e4ac346c</uuid>
<os>
<type arch='i686'>hvm</type>
<loader>/usr/lib/xen/boot/hvmloader</loader>
<boot dev='hd'/>
</os>
<features>
<apic/><acpi/><pae/>
</features>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<vcpu>1</vcpu>
<devices>
<emulator>/usr/lib/xen/bin/qemu-dm</emulator>
<console device='pty'/>
<disk type='block' device='disk'>
<source dev='/dev/mapper/dev-trub'/>
<target dev='hda'/>
</disk>
<disk type='file' device='cdrom'>
<source file=''/>
<target dev='hdc'/>
<readonly/>
</disk>
<interface type='bridge'>
<source bridge='xenbr0'/>
<mac address='00:16:3e:41:71:d1'/>
</interface>
</devices>
</domain>
'
Domain installation still in progress. You can reconnect to
the console to complete the installation process.
[root@devxen xen]# virsh connect trub
libvir: error : could not connect to trub
error: Failed to connect to the hypervisor
[root@devxen xen]# virsh list
Id Name State
----------------------------------
0 Domain-0 running
4 trub no state
I can't connect or console or anything and I'm only using console access, ssh,
serial, no graphical stuff at all.
I must be missing something, just strange. don't see anything in logs, and my remote
install is showing that it's getting to installing some boel binaries and nothing
else.
What's so different about paravirt and fullvirt?
Thanks
Tory
Show replies by date