12:06 p.m.
Hi all!
At first I have to admit that I am very inexperienced in using XEN!
What I try to do is get OpenSuse 10.2 working on my FC6 Station.
To do that I did the following steps:
1)Installed the XEN Kernel: 2.6.19-1.2911.fc6xen
2)Installed OpenSuse 10.2 on my girlfriends Laptop
3)made a complete image of the installation and put it in my home:
/home/user/opensuse102xen.img
4)created an suse.xen.cfg:
kernel = "/boot/vmlinuz-2.6.19-1.2911.fc6xen"
ramdisk= "/boot/initrd-2.6.19-1.2911.fc6xen.img"
memory = 512
name = "opensuse102"
vif = ['']
#nics = 1
#dhcp = "dhcp"
disk = ['file:/home/rehcla/opensuse102xen.img,xvda,w']
root = "/dev/xvda ro"
5)did edit the /etc/fstab in the Image:
/dev/xvda / ext3 acl,user_xattr 1 1
#/dev/hda1 /windows/C ntfs
ro,users,gid=users,umask=0002,nls=utf8 0 0
#/dev/hda2 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
~
When I try to start Xen with:
"xm create opensuse102 -c suse.xen.cfg"
I get this:
Using config file "./suse.xen.cfg".
Started domain opensuse102
Linux version 2.6.19-1.2911.fc6xen (brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.492 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 507648k/532480k available (2168k kernel code, 16360k reserved, 1106k data, 180k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8488.39 BogoMIPS (lpj=16976791)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5155k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172157593.055:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.19-1.2911.fc6xen (brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.492 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 507648k/532480k available (2168k kernel code, 16360k reserved, 1106k data, 180k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8488.39 BogoMIPS (lpj=16976791)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5155k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172157593.055:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 180k freed
Write protecting the kernel read-only data: 387k
Red Hat nash version 5.1.19.0.2 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ata_piix.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel(a)redhat.com
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
No volume groups found
Activating logical volumes
Volume group "VolGroup00" not found
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Can some help me?
Thanks!
Claus Reheis
4:30 p.m.
Hi Claus --
Almost certainly (believe me, based on hard-won experience) your problem
is with the initrd.img defined in your VM config file:
ramdisk= "/boot/initrd-2.6.19-1.2911.fc6xen.img"
The root cause is probably the img file missing the xenblk.ko driver. Just
rebuild the initrd using the "--with" switch to include it.
If that doesn't work, you will need to look into the initrd image and
possibly modify the init script; it may be trying to mount a nonexistent
root device. But, my guess is xenblk.ko is missing. Search through the
mailing list here or on xensource.com and it has been discussed recently.
Good luck,
Dave
9:47 p.m.
On Thu, 22 Feb 2007, master(a)bradleyland.com wrote:
Almost certainly (believe me, based on hard-won experience) your problem
is with the initrd.img defined in your VM config file:
ramdisk= "/boot/initrd-2.6.19-1.2911.fc6xen.img"
The root cause is probably the img file missing the xenblk.ko driver. Just
rebuild the initrd using the "--with" switch to include it.
That's not enough, since you need to preload it. What I do to create
initrd's for the guests (xenU's) on the dom0 is:
mkinitrd /boot/initrd-2.6.19-1.2911.fc6xenU.img --preload=xenblk --with=xennet
2.6.19-1.2911.fc6xen
I've said it before and I'll say it again. Life would be much simpler if
all the "xen" kernel tree images include xenblk and xennet in the initrd.
The "space" won has been completely not worth the time people lost over
this issue.
Paul
--
Building and integrating Virtual Private Networks with Openswan:
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
7:22 a.m.
Hi Paul, hi Dave!
I did a:
mkinitrd -f --with=ext3 --preload=ext3 --with=xennet --builtin=aic7xxx
--builtin=serverworks --preload=xenblk --omit-raid-modules
--omit-lvm-modules
--fstab=/home/user/disk/etc/fstab /boot/xen-initrd.img
2.6.19-1.2911.fc6xen
created a new xen-initrd.img and tried again with this suse.xen.conf:
kernel = "/boot/vmlinuz-2.6.19-1.2911.fc6xen"
initrd= "/boot/xen-initrd.img"
memory = 512
name = "opensuse102"
vif = ['']
#nics = 1
#dhcp = "dhcp"
disk = ['file:/home/rehcla/opensuse102xen.img,xvda,w']
root = "/dev/xvda ro"
and got again a Kernel Panic:
Using config file "./suse.xen.cfg".
Started domain opensuse102
Linux version 2.6.19-1.2911.fc6xen
(brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105
(Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.492 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 512768k/532480k available (2168k kernel code, 11204k reserved,
1106k data, 180k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 8487.78 BogoMIPS
(lpj=16975578)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172231052.798:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.19-1.2911.fc6xen
(brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105
(Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.492 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 512768k/532480k available (2168k kernel code, 11204k reserved,
1106k data, 180k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 8487.78 BogoMIPS
(lpj=16975578)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172231052.798:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "xvda" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
I also downloaded an debian 3.1 image from http://jailtime.org/
what gave me with the old initrd.img the same error as the
opensuse102xen.img.
I tried it with the new xen-initrd.img and the result gives me hope:)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.494 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 512768k/532480k available (2168k kernel code, 11204k reserved, 1106k data, 180k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8494.77 BogoMIPS (lpj=16989547)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172213430.748:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.19-1.2911.fc6xen (brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.494 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 512768k/532480k available (2168k kernel code, 11204k reserved, 1106k data, 180k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8494.77 BogoMIPS (lpj=16989547)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172213430.748:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "xvda" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[root@workstation rehcla]# xm create -c /home/rehcla/debian/debian.3-1.xen3.cfg
Using config file "/home/rehcla/debian/debian.3-1.xen3.cfg".
Started domain debian.3-1
Linux version 2.6.19-1.2911.fc6xen (brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.494 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 507520k/532480k available (2168k kernel code, 16420k reserved, 1106k data, 180k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8495.53 BogoMIPS (lpj=16991062)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5216k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172216475.645:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.19-1.2911.fc6xen (brewbuilder(a)hs20-bc2-4.build.redhat.com) (gcc version
4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.494 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 507520k/532480k available (2168k kernel code, 16420k reserved, 1106k data, 180k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8495.53 BogoMIPS (lpj=16991062)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5216k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran(a)veritas.com>
audit: initializing netlink socket (disabled)
audit(1172216475.645:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 180k freed
Write protecting the kernel read-only data: 387k
Red Hat nash version 5.1.19.0.2 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading jbd.ko module
Loading ext3.ko module
Loading xenblk.ko module
Registering block device major 8
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
register_blkdev: cannot get major 8 for sd
Loading libata.ko module
Loading ata_piix.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel(a)redhat.com
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
No volume groups found
Activating logical volumes
Volume group "VolGroup00" not found
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Activating swap.
Adding 65528k swap on /dev/sda2. Priority:-1 extents:1 across:65528k
Checking root file system...
fsck 1.37 (21-Mar-2005)
/dev/sda1: clean, 8493/131072 files, 48009/262144 blocks
EXT3 FS on sda1, internal journal
System time was Fri Feb 23 07:41:31 UTC 2007.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Fri Feb 23 07:41:40 UTC 2007.
Cleaning up ifupdown...done.
Creating device-mapper devices...done.
Checking all file systems...
fsck 1.37 (21-Mar-2005)
Setting kernel variables ...
... done.
Mounting local filesystems...
Cleaning /tmp /var/run /var/lock.
Setting up networking...done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/eth0/00:16:3e:7f:4d:fa
Sending on LPF/eth0/00:16:3e:7f:4d:fa
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPOFFER from 192.168.0.1
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.104 -- renewal in 21600 seconds.
done.
Loading the saved-state of the serial devices...
Not setting System Clock
INIT: Entering runlevel: 3
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting OpenBSD Secure Shell server: sshdPRNG is not seeded
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
At this step the progess stops and does not move on!
No error message, nothing!
xm list gives me:
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 1508 2 r----- 405.2
debian.3-1 3 511 1 r----- 1189.0
Login from another terminal with:
xm console 3
was also not possible!
Here is the /var/log/xen/xend.log:
2007-02-23 09:05:15 xend 3120] DEBUG (image:205) cmdline =
ip=:1.2.3.4::::eth0:dhcp root=/dev/sda1 ro
[2007-02-23 09:05:15 xend 3120] DEBUG (image:206) ramdisk = /boot/xen-initrd.img
[2007-02-23 09:05:15 xend 3120] DEBUG (image:207) vcpus = 1
[2007-02-23 09:05:15 xend 3120] DEBUG (image:208) features =
[2007-02-23 09:05:15 xend 3120] DEBUG (DevController:110) DevController: writing
{'backend-id': '0', 'virtual-device': '2049',
'device-type': 'disk', 'state': '1', 'backend':
'/
local/domain/0/backend/vbd/3/2049'} to /local/domain/3/device/vbd/2049.
[2007-02-23 09:05:15 xend 3120] DEBUG (DevController:112) DevController: writing
{'domain': 'debian.3-1', 'frontend':
'/local/domain/3/device/vbd/2049', 'dev': 'sda1', 'state':
'1', 'params': '/home/rehcla/debian/debian.3-1.img',
'mode': 'w', 'online': '1', 'frontend-id':
'3', 'type': 'file'} to /local/domain/0/backend/vbd/3/2049.
[2007-02-23 09:05:15 xend 3120] DEBUG (DevController:110) DevController: writing
{'backend-id': '0', 'virtual-device': '2050',
'device-type': 'disk', 'state': '1', 'backend':
'/
local/domain/0/backend/vbd/3/2050'} to /local/domain/3/device/vbd/2050.
[2007-02-23 09:05:15 xend 3120] DEBUG (DevController:112) DevController: writing
{'domain': 'debian.3-1', 'frontend':
'/local/domain/3/device/vbd/2050', 'dev': 'sda2', 'state':
'1', 'params': '/home/rehcla/debian/debian.swap', 'mode':
'w', 'online': '1', 'frontend-id': '3',
'type': 'file'} to /local/domain/0/backend/vbd/3/2050.
[2007-02-23 09:05:15 xend 3120] DEBUG (DevController:110) DevController: writing
{'backend-id': '0', 'mac': '00:16:3e:78:3f:1e',
'handle': '0', 'state': '1', 'backend':
'/local/
domain/0/backend/vif/3/0'} to /local/domain/3/device/vif/0.
[2007-02-23 09:05:15 xend 3120] DEBUG (DevController:112) DevController: writing
{'domain': 'debian.3-1', 'handle': '0', 'script':
'/etc/xen/scripts/vif-bridge', 'state': '1', '
frontend': '/local/domain/3/device/vif/0', 'mac':
'00:16:3e:78:3f:1e', 'online': '1', 'frontend-id':
'3'} to /local/domain/0/backend/vif/3/0.
[2007-02-23 09:05:15 xend.XendDomainInfo 3120] DEBUG (XendDomainInfo:715) Storing VM
details: {'shadow_memory': '0', 'uuid':
'3d361011-5da9-5c8a-40a9-5f2b3daedd72', 'on_reboot':
'restart', 'start_time': '1172217915.99', 'on_poweroff':
'destroy', 'name': 'debian.3-1', 'xend/restart_count':
'0', 'vcpus': '1', 'vcpu_avail': '1',
'memory': '512', 'on_crash
': 'restart', 'image': "(linux (kernel
/boot/vmlinuz-2.6.19-1.2911.fc6xen) (ramdisk /boot/xen-initrd.img) (ip
:1.2.3.4::::eth0:dhcp) (root '/dev/sda1 ro') (vncunused 1) (display
:0.0) (xauthority /root/.xauthKyCkI4))", 'maxmem': '512'}
[2007-02-23 09:05:16 xend.XendDomainInfo 3120] DEBUG (XendDomainInfo:750) Storing domain
details: {'console/ring-ref': '180218', 'console/port':
'2', 'name': 'debian.3-1', 'cons
ole/limit': '1048576', 'vm':
'/vm/3d361011-5da9-5c8a-40a9-5f2b3daedd72', 'domid': '3',
'cpu/0/availability': 'online', 'memory/target': '524288',
'store/ring-ref': '180219', 'st
ore/port': '1'}
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices vif.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:149) Waiting for 0.
[2007-02-23 09:05:16 xend.XendDomainInfo 3120] DEBUG (XendDomainInfo:940)
XendDomainInfo.handleShutdownWatch
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:471) hotplugStatusCallback
/local/domain/0/backend/vif/3/0/hotplug-status.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:471) hotplugStatusCallback
/local/domain/0/backend/vif/3/0/hotplug-status.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:485) hotplugStatusCallback 1.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices usb.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices vbd.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:149) Waiting for 2049.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:471) hotplugStatusCallback
/local/domain/0/backend/vbd/3/2049/hotplug-status.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:471) hotplugStatusCallback
/local/domain/0/backend/vbd/3/2049/hotplug-status.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:485) hotplugStatusCallback 1.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:149) Waiting for 2050.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:471) hotplugStatusCallback
/local/domain/0/backend/vbd/3/2050/hotplug-status.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:485) hotplugStatusCallback 1.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices irq.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices pci.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices ioports.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices tap.
[2007-02-23 09:05:16 xend 3120] DEBUG (DevController:143) Waiting for devices vtpm.
[2007-02-23 09:05:16 xend 3120] INFO (XendDomain:370) Domain debian.3-1 (3) unpaused.
Any Idea?
Thanks for your answers,
Claus Reheis
On Fri, 2007-02-23 at 04:47 +0100, Paul Wouters wrote:
On Thu, 22 Feb 2007, master(a)bradleyland.com wrote:
>
> Almost certainly (believe me, based on hard-won experience) your problem
> is with the initrd.img defined in your VM config file:
>
> ramdisk= "/boot/initrd-2.6.19-1.2911.fc6xen.img"
>
> The root cause is probably the img file missing the xenblk.ko driver. Just
> rebuild the initrd using the "--with" switch to include it.
That's not enough, since you need to preload it. What I do to create
initrd's for the guests (xenU's) on the dom0 is:
mkinitrd /boot/initrd-2.6.19-1.2911.fc6xenU.img --preload=xenblk --with=xennet
2.6.19-1.2911.fc6xen
I've said it before and I'll say it again. Life would be much simpler if
all the "xen" kernel tree images include xenblk and xennet in the initrd.
The "space" won has been completely not worth the time people lost over
this issue.
Paul
6295
days inactive
6296
days old
3 comments
3 participants
participants (3)
-
Claus Reheis -
master＠bradleyland.com -
Paul Wouters