libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID while virt-installing rawhide
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
Any ideas how to debug that?
Some more debug info ("xm list --long test3vm" and "xenstore-ls") available from here: http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo.txt
-- Pasi
On Wed, Aug 19, 2009 at 11:48:54PM +0300, Pasi K?rkk?inen wrote:
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
This message
Wed, 19 Aug 2009 21:20:40 DEBUG Launching console callback
shows that virt-install things it is working, and so spawned virt-viewer.
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID
are coming from virt-viewer program.
Any ideas how to debug that?
Some more debug info ("xm list --long test3vm" and "xenstore-ls") available from here: http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo.txt
Can you file a bug about this - even though Dom0 kernels aren't in F12, we have the Xen userspace & libvirt driver present & should make sure those do actually work.
Include the data from the 2 URLs you have here, and also the xend.log file
Daniel
On Thu, Aug 20, 2009 at 09:58:25AM +0100, Daniel P. Berrange wrote:
On Wed, Aug 19, 2009 at 11:48:54PM +0300, Pasi K?rkk?inen wrote:
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
This message
Wed, 19 Aug 2009 21:20:40 DEBUG Launching console callback
shows that virt-install things it is working, and so spawned virt-viewer.
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID
are coming from virt-viewer program.
OK. That's good to know. I'll play with it a bit more today.
Maybe I should try updating to newer libvirt/virt-viewer first.
From virt-preview repo?
Any ideas how to debug that?
Some more debug info ("xm list --long test3vm" and "xenstore-ls") available from here: http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo.txt
Can you file a bug about this - even though Dom0 kernels aren't in F12, we have the Xen userspace & libvirt driver present & should make sure those do actually work.
Sure.
Include the data from the 2 URLs you have here, and also the xend.log file
Should I file it against virt-viewer or virt-install/libvirt ?
-- Pasi
On Thu, Aug 20, 2009 at 12:47:50PM +0300, Pasi K?rkk?inen wrote:
On Thu, Aug 20, 2009 at 09:58:25AM +0100, Daniel P. Berrange wrote:
On Wed, Aug 19, 2009 at 11:48:54PM +0300, Pasi K?rkk?inen wrote:
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
This message
Wed, 19 Aug 2009 21:20:40 DEBUG Launching console callback
shows that virt-install things it is working, and so spawned virt-viewer.
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID
are coming from virt-viewer program.
OK. That's good to know. I'll play with it a bit more today.
Maybe I should try updating to newer libvirt/virt-viewer first. From virt-preview repo?
That'd be a useful data point if you wish to try it.
Any ideas how to debug that?
Some more debug info ("xm list --long test3vm" and "xenstore-ls") available from here: http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo.txt
Can you file a bug about this - even though Dom0 kernels aren't in F12, we have the Xen userspace & libvirt driver present & should make sure those do actually work.
Sure.
Include the data from the 2 URLs you have here, and also the xend.log file
Should I file it against virt-viewer or virt-install/libvirt ?
Either will do - its not clear yet just which is at fault
Daniel
On Thu, Aug 20, 2009 at 10:51:47AM +0100, Daniel P. Berrange wrote:
On Thu, Aug 20, 2009 at 12:47:50PM +0300, Pasi K?rkk?inen wrote:
On Thu, Aug 20, 2009 at 09:58:25AM +0100, Daniel P. Berrange wrote:
On Wed, Aug 19, 2009 at 11:48:54PM +0300, Pasi K?rkk?inen wrote:
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
This message
Wed, 19 Aug 2009 21:20:40 DEBUG Launching console callback
shows that virt-install things it is working, and so spawned virt-viewer.
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID
are coming from virt-viewer program.
OK. That's good to know. I'll play with it a bit more today.
Maybe I should try updating to newer libvirt/virt-viewer first. From virt-preview repo?
That'd be a useful data point if you wish to try it.
Hmm.. it seems today I'm getting different error:
http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo2.txt http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo2-xm-lo...
virt-install output: Thu, 20 Aug 2009 18:02:47 ERROR POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\n')")
"xm log": [2009-08-20 18:02:47 2161] ERROR (XendDomainInfo:2202) Device model destroy failed X86_Linux_ImageHandler instance has no attribute \047sentinel_lock\047
Something changed in the latest rawhide kernel?
# file vmlinuz-PAE vmlinuz-PAE: Linux kernel x86 boot executable bzImage, version 2.6.31-0.162.rc6.git2.fc12.i686, RO-rootFS, root_dev 0x902, swap_dev 0x2, Normal VGA
Any ideas?
-- Pasi
On Thu, Aug 20, 2009 at 06:08:28PM +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 10:51:47AM +0100, Daniel P. Berrange wrote:
On Thu, Aug 20, 2009 at 12:47:50PM +0300, Pasi K?rkk?inen wrote:
On Thu, Aug 20, 2009 at 09:58:25AM +0100, Daniel P. Berrange wrote:
On Wed, Aug 19, 2009 at 11:48:54PM +0300, Pasi K?rkk?inen wrote:
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
This message
Wed, 19 Aug 2009 21:20:40 DEBUG Launching console callback
shows that virt-install things it is working, and so spawned virt-viewer.
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID
are coming from virt-viewer program.
OK. That's good to know. I'll play with it a bit more today.
Maybe I should try updating to newer libvirt/virt-viewer first. From virt-preview repo?
That'd be a useful data point if you wish to try it.
Hmm.. it seems today I'm getting different error:
http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo2.txt http://pasik.reaktio.net/fedora/virt-install-rawhide-on-f11-debuginfo2-xm-lo...
virt-install output: Thu, 20 Aug 2009 18:02:47 ERROR POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\n')")
"xm log": [2009-08-20 18:02:47 2161] ERROR (XendDomainInfo:2202) Device model destroy failed X86_Linux_ImageHandler instance has no attribute \047sentinel_lock\047
Something changed in the latest rawhide kernel?
# file vmlinuz-PAE vmlinuz-PAE: Linux kernel x86 boot executable bzImage, version 2.6.31-0.162.rc6.git2.fc12.i686, RO-rootFS, root_dev 0x902, swap_dev 0x2, Normal VGA
Any ideas?
I just tried without virt-install:
# cat test3vm.cfg name = "test3vm" uuid = "9cf2267d-9513-b9b7-bcd9-29f2962c7bd6" maxmem = 512 memory = 512 vcpus = 1 kernel = "/tmp/vmlinuz-PAE" ramdisk = "/tmp/initrd-PAE.img" on_poweroff = "destroy" on_reboot = "preserve" on_crash = "preserve" vfb = [ "type=vnc,vncunused=1" ] disk = [ "phy:vg_dom0test/test3vm,xvda,w" ] vif = [ "mac=00:16:4e:1b:ef:56,bridge=virbr0" ]
# xm create -f test3vm.cfg -c Using config file "./test3vm.cfg". Error: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\n')
So same error.
# file /tmp/vmlinuz-PAE /tmp/vmlinuz-PAE: Linux kernel x86 boot executable bzImage, version 2.6.31-0.162.rc6.git2.fc12.i686, RO-rootFS, root_dev 0x902, swap_dev 0x2, Normal VGA
# grep CONFIG_KERNEL config-2.6.31-0.162.rc6.git2.fc12.i686.PAE
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
-- Pasi
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Cheers, Mark.
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
-- Pasi
On Thu, 2009-08-20 at 19:44 +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
Testing Chris's patch would certainly be a good idea. LZMA will come back again in Fedora 13, so we should make sure to have the patch in good shape by then
Cheers, Mark.
On Thu, Aug 20, 2009 at 07:02:12PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 19:44 +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
Testing Chris's patch would certainly be a good idea. LZMA will come back again in Fedora 13, so we should make sure to have the patch in good shape by then
I actually already 'ported' the patch to Xen 3.4.1 and made sure it compiles OK. I've included it (and extra gcc 4.4.0 compilefix) to this email, and also sent them to xen-devel.
atm I'm trying to make the patch work/apply with Fedora xen-3.4.1-1 src.rpm .. and sorting out some fedora/rpm specific compilation failure..
-- Pasi
On Thu, Aug 20, 2009 at 10:04:09PM +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 07:02:12PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 19:44 +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
Testing Chris's patch would certainly be a good idea. LZMA will come back again in Fedora 13, so we should make sure to have the patch in good shape by then
I actually already 'ported' the patch to Xen 3.4.1 and made sure it compiles OK. I've included it (and extra gcc 4.4.0 compilefix) to this email, and also sent them to xen-devel.
atm I'm trying to make the patch work/apply with Fedora xen-3.4.1-1 src.rpm .. and sorting out some fedora/rpm specific compilation failure..
Here's updated patch that actually works. I added it to xen-3.4.1-1.src.rpm and verified the resulting rpms are able to boot lzma compressed kernels.
It's still not final patch, since the stubdom/pvgrub bzip2/lzma support is not yet included in this patch (until the proper method for Makefile hacks is determined upstream).
-- Pasi
Could you remind F12 rawhide location on the Net for --location key for virt-install command line to test on 64-bit .
Thanks. Boris.
--- On Sun, 8/23/09, Pasi Kärkkäinen pasik@iki.fi wrote:
From: Pasi Kärkkäinen pasik@iki.fi Subject: Re: [Fedora-xen] BZIP2 and LZMA support patch for Xen PV domU bootloader To: "Mark McLoughlin" markmc@redhat.com Cc: fedora-xen@redhat.com Date: Sunday, August 23, 2009, 12:45 PM
On Thu, Aug 20, 2009 at 10:04:09PM +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 07:02:12PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 19:44 +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
Testing Chris's patch would certainly be a good idea. LZMA will come back again in Fedora 13, so we should make sure to have the patch in good shape by then
I actually already 'ported' the patch to Xen 3.4.1 and made sure it compiles OK. I've included it (and extra gcc 4.4.0 compilefix) to this email, and also sent them to xen-devel.
atm I'm trying to make the patch work/apply with Fedora xen-3.4.1-1 src.rpm .. and sorting out some fedora/rpm specific compilation failure..
Here's updated patch that actually works. I added it to xen-3.4.1-1.src.rpm and verified the resulting rpms are able to boot lzma compressed kernels.
It's still not final patch, since the stubdom/pvgrub bzip2/lzma support is not yet included in this patch (until the proper method for Makefile hacks is determined upstream).
-- Pasi
-----Inline Attachment Follows-----
-- Fedora-xen mailing list Fedora-xen@redhat.com https://www.redhat.com/mailman/listinfo/fedora-xen
On Sun, Aug 23, 2009 at 09:58:18PM -0700, Boris Derzhavets wrote:
Could you remind F12 rawhide location on the Net for --location key for virt-install command line to test on 64-bit .
For example: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os
-- Pasi
Thanks. Boris.
--- On Sun, 8/23/09, Pasi Kärkkäinen pasik@iki.fi wrote:
From: Pasi Kärkkäinen pasik@iki.fi Subject: Re: [Fedora-xen] BZIP2 and LZMA support patch for Xen PV domU bootloader To: "Mark McLoughlin" markmc@redhat.com Cc: fedora-xen@redhat.com Date: Sunday, August 23, 2009, 12:45 PM
On Thu, Aug 20, 2009 at 10:04:09PM +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 07:02:12PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 19:44 +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
Testing Chris's patch would certainly be a good idea. LZMA will come back again in Fedora 13, so we should make sure to have the patch in good shape by then
I actually already 'ported' the patch to Xen 3.4.1 and made sure it compiles OK. I've included it (and extra gcc 4.4.0 compilefix) to this email, and also sent them to xen-devel.
atm I'm trying to make the patch work/apply with Fedora xen-3.4.1-1 src.rpm .. and sorting out some fedora/rpm specific compilation failure..
Here's updated patch that actually works. I added it to xen-3.4.1-1.src.rpm and verified the resulting rpms are able to boot lzma compressed kernels.
It's still not final patch, since the stubdom/pvgrub bzip2/lzma support is not yet included in this patch (until the proper method for Makefile hacks is determined upstream).
-- Pasi
-----Inline Attachment Follows-----
-- Fedora-xen mailing list Fedora-xen@redhat.com https://www.redhat.com/mailman/listinfo/fedora-xen
Fresh install Xen 3.4.1 via xen-3.4.1-1.src.rpm with LZMA support patch + libvirt 0.7.0-6 (preview) tested OK with F11 PV DomU install. Kernel (supporting Dom0 ) - 2.6.30.2 xenified aka Suse
Attempt to install F12 PV DomU ( Core2Duo E8400, 8 GB RAM ,SATA ) :-
[root@ServerXenSRC ~]# virt-install --debug -n f12pv -r 1024 --vcpus=1 \ -f /dev/sda12 --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os"
Mon, 24 Aug 2009 14:36:36 DEBUG Launched with command line: /usr/sbin/virt-install --debug -n f12pv -r 1024 --vcpus=1 -f /dev/sda12 --vnc -p -l ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os Mon, 24 Aug 2009 14:36:36 DEBUG Requesting libvirt URI default Mon, 24 Aug 2009 14:36:36 DEBUG Received libvirt URI xen:/// Mon, 24 Aug 2009 14:36:36 DEBUG Requesting virt method 'xen', hv type 'default'. Mon, 24 Aug 2009 14:36:36 DEBUG Received virt method 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG Hypervisor name is 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG DistroInstaller location is a network source.
Starting install... Mon, 24 Aug 2009 14:36:36 DEBUG Attempting to detect distro: Mon, 24 Aug 2009 14:36:37 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/.treeinfo Mon, 24 Aug 2009 14:36:39 DEBUG Saved file to /var/lib/xen/virtinst-.treeinfo.WVH7xk Retrieving file .treeinfo... | 1.2 kB 00:00 Mon, 24 Aug 2009 14:36:39 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/vmlinuz Mon, 24 Aug 2009 14:37:11 DEBUG Saved file to /var/lib/xen/virtinst-vmlinuz.gFkrVE kB/s | 3.5 MB 00:30 Retrieving file vmlinuz... | 3.5 MB 00:30 Mon, 24 Aug 2009 14:37:11 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/initrd.img Mon, 24 Aug 2009 14:40:23 DEBUG Saved file to /var/lib/xen/virtinst-initrd.img.IFk0Bn/s | 22 MB 03:10 Retrieving file initrd.img... | 22 MB 03:10 Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS type as: linux Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS variant as: fedora12 Mon, 24 Aug 2009 14:40:23 DEBUG Creating guest from: <domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <os> <type arch='x86_64'>linux</type> <kernel>/var/lib/xen/virtinst-vmlinuz.gFkrVE</kernel> <initrd>/var/lib/xen/virtinst-initrd.img.IFk0Bn</initrd> <cmdline>method=ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os</cmdline> </os> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Creating domain... | 0 B 00:01 Mon, 24 Aug 2009 14:40:24 DEBUG Created guest, looking to see if it is running Mon, 24 Aug 2009 14:40:24 DEBUG Launching console callback Mon, 24 Aug 2009 14:40:24 DEBUG Saving XML boot config: <domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <bootloader>/usr/bin/pygrub</bootloader> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Virt-viewer hangs with message "Waiting for guest domain to be created"
Boris
--- On Sun, 8/23/09, Pasi Kärkkäinen pasik@iki.fi wrote:
From: Pasi Kärkkäinen pasik@iki.fi Subject: Re: [Fedora-xen] BZIP2 and LZMA support patch for Xen PV domU bootloader To: "Mark McLoughlin" markmc@redhat.com Cc: fedora-xen@redhat.com Date: Sunday, August 23, 2009, 12:45 PM
On Thu, Aug 20, 2009 at 10:04:09PM +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 07:02:12PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 19:44 +0300, Pasi Kärkkäinen wrote:
On Thu, Aug 20, 2009 at 05:05:17PM +0100, Mark McLoughlin wrote:
On Thu, 2009-08-20 at 18:41 +0300, Pasi Kärkkäinen wrote:
# CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y
OK, so the problem is the rawhide kernel is LZMA compressed. Wasn't this changed back to GZIP earlier?
Thanks for pointing that out, see:
https://bugzilla.redhat.com/show_bug.cgi?id=515831
It got disabled on a branch for the F12 Alpha release, but never got disabled on the devel/ branch. Should be fixed now.
Thanks. Now I'll just wait for the next kernel build.. :)
(or try applying the patch Chris sent to support BZIP2 and LZMA for Xen PV bootloader).
Testing Chris's patch would certainly be a good idea. LZMA will come back again in Fedora 13, so we should make sure to have the patch in good shape by then
I actually already 'ported' the patch to Xen 3.4.1 and made sure it compiles OK. I've included it (and extra gcc 4.4.0 compilefix) to this email, and also sent them to xen-devel.
atm I'm trying to make the patch work/apply with Fedora xen-3.4.1-1 src.rpm .. and sorting out some fedora/rpm specific compilation failure..
Here's updated patch that actually works. I added it to xen-3.4.1-1.src.rpm and verified the resulting rpms are able to boot lzma compressed kernels.
It's still not final patch, since the stubdom/pvgrub bzip2/lzma support is not yet included in this patch (until the proper method for Makefile hacks is determined upstream).
-- Pasi
-----Inline Attachment Follows-----
-- Fedora-xen mailing list Fedora-xen@redhat.com https://www.redhat.com/mailman/listinfo/fedora-xen
On Mon, Aug 24, 2009 at 04:22:30AM -0700, Boris Derzhavets wrote:
Fresh install Xen 3.4.1 via xen-3.4.1-1.src.rpm with LZMA support patch + libvirt 0.7.0-6 (preview) tested OK with F11 PV DomU install. Kernel (supporting Dom0 ) - 2.6.30.2 xenified aka Suse
Attempt to install F12 PV DomU ( Core2Duo E8400, 8 GB RAM ,SATA ) :-
[root@ServerXenSRC ~]# virt-install --debug -n f12pv -r 1024 --vcpus=1 \ -f /dev/sda12 --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os"
Mon, 24 Aug 2009 14:36:36 DEBUG Launched with command line: /usr/sbin/virt-install --debug -n f12pv -r 1024 --vcpus=1 -f /dev/sda12 --vnc -p -l ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os Mon, 24 Aug 2009 14:36:36 DEBUG Requesting libvirt URI default Mon, 24 Aug 2009 14:36:36 DEBUG Received libvirt URI xen:/// Mon, 24 Aug 2009 14:36:36 DEBUG Requesting virt method 'xen', hv type 'default'. Mon, 24 Aug 2009 14:36:36 DEBUG Received virt method 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG Hypervisor name is 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG DistroInstaller location is a network source.
Starting install... Mon, 24 Aug 2009 14:36:36 DEBUG Attempting to detect distro: Mon, 24 Aug 2009 14:36:37 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/.treeinfo Mon, 24 Aug 2009 14:36:39 DEBUG Saved file to /var/lib/xen/virtinst-.treeinfo.WVH7xk Retrieving file .treeinfo... | 1.2 kB 00:00 Mon, 24 Aug 2009 14:36:39 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/vmlinuz Mon, 24 Aug 2009 14:37:11 DEBUG Saved file to /var/lib/xen/virtinst-vmlinuz.gFkrVE kB/s | 3.5 MB 00:30 Retrieving file vmlinuz... | 3.5 MB 00:30 Mon, 24 Aug 2009 14:37:11 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/initrd.img Mon, 24 Aug 2009 14:40:23 DEBUG Saved file to /var/lib/xen/virtinst-initrd.img.IFk0Bn/s | 22 MB 03:10 Retrieving file initrd.img... | 22 MB 03:10 Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS type as: linux Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS variant as: fedora12 Mon, 24 Aug 2009 14:40:23 DEBUG Creating guest from:
<domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <os> <type arch='x86_64'>linux</type> <kernel>/var/lib/xen/virtinst-vmlinuz.gFkrVE</kernel> <initrd>/var/lib/xen/virtinst-initrd.img.IFk0Bn</initrd> <cmdline>method=ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os</cmdline> </os> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Creating domain... | 0 B 00:01 Mon, 24 Aug 2009 14:40:24 DEBUG Created guest, looking to see if it is running Mon, 24 Aug 2009 14:40:24 DEBUG Launching console callback Mon, 24 Aug 2009 14:40:24 DEBUG Saving XML boot config:
<domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <bootloader>/usr/bin/pygrub</bootloader> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Virt-viewer hangs with message "Waiting for guest domain to be created"
Check "xm log" - for me the guest crashes immediately.
This is a known bug in F12/rawhide kernel.
-- Pasi
Do you mean, that you experiencing same issue on 32-bit and patch is supposed to handle only just startup phase ?
Boris.
--- On Mon, 8/24/09, Pasi Kärkkäinen pasik@iki.fi wrote:
From: Pasi Kärkkäinen pasik@iki.fi Subject: Re: [Fedora-xen] BZIP2 and LZMA support patch for Xen PV domU bootloader To: "Boris Derzhavets" bderzhavets@yahoo.com Cc: "Mark McLoughlin" markmc@redhat.com, fedora-xen@redhat.com Date: Monday, August 24, 2009, 8:26 AM
On Mon, Aug 24, 2009 at 04:22:30AM -0700, Boris Derzhavets wrote:
Fresh install Xen 3.4.1 via xen-3.4.1-1.src.rpm with LZMA support patch + libvirt 0.7.0-6 (preview) tested OK with F11 PV DomU install. Kernel (supporting Dom0 ) - 2.6.30.2 xenified aka Suse
Attempt to install F12 PV DomU ( Core2Duo E8400, 8 GB RAM ,SATA ) :-
[root@ServerXenSRC ~]# virt-install --debug -n f12pv -r 1024 --vcpus=1 \ -f /dev/sda12 --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os"
Mon, 24 Aug 2009 14:36:36 DEBUG Launched with command line: /usr/sbin/virt-install --debug -n f12pv -r 1024 --vcpus=1 -f /dev/sda12 --vnc -p -l ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os Mon, 24 Aug 2009 14:36:36 DEBUG Requesting libvirt URI default Mon, 24 Aug 2009 14:36:36 DEBUG Received libvirt URI xen:/// Mon, 24 Aug 2009 14:36:36 DEBUG Requesting virt method 'xen', hv type 'default'. Mon, 24 Aug 2009 14:36:36 DEBUG Received virt method 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG Hypervisor name is 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG DistroInstaller location is a network source.
Starting install... Mon, 24 Aug 2009 14:36:36 DEBUG Attempting to detect distro: Mon, 24 Aug 2009 14:36:37 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/.treeinfo Mon, 24 Aug 2009 14:36:39 DEBUG Saved file to /var/lib/xen/virtinst-.treeinfo.WVH7xk Retrieving file .treeinfo... | 1.2 kB 00:00 Mon, 24 Aug 2009 14:36:39 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/vmlinuz Mon, 24 Aug 2009 14:37:11 DEBUG Saved file to /var/lib/xen/virtinst-vmlinuz.gFkrVE kB/s | 3.5 MB 00:30 Retrieving file vmlinuz... | 3.5 MB 00:30 Mon, 24 Aug 2009 14:37:11 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/initrd.img Mon, 24 Aug 2009 14:40:23 DEBUG Saved file to /var/lib/xen/virtinst-initrd.img.IFk0Bn/s | 22 MB 03:10 Retrieving file initrd.img... | 22 MB 03:10 Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS type as: linux Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS variant as: fedora12 Mon, 24 Aug 2009 14:40:23 DEBUG Creating guest from:
<domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <os> <type arch='x86_64'>linux</type> <kernel>/var/lib/xen/virtinst-vmlinuz.gFkrVE</kernel> <initrd>/var/lib/xen/virtinst-initrd.img.IFk0Bn</initrd> <cmdline>method=ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os </os> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Creating domain... | 0 B 00:01 Mon, 24 Aug 2009 14:40:24 DEBUG Created guest, looking to see if it is running Mon, 24 Aug 2009 14:40:24 DEBUG Launching console callback Mon, 24 Aug 2009 14:40:24 DEBUG Saving XML boot config:
<domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <bootloader>/usr/bin/pygrub</bootloader> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Virt-viewer hangs with message "Waiting for guest domain to be created"
Check "xm log" - for me the guest crashes immediately.
This is a known bug in F12/rawhide kernel.
-- Pasi
On Mon, Aug 24, 2009 at 05:41:03AM -0700, Boris Derzhavets wrote:
Do you mean, that you experiencing same issue on 32-bit and patch is supposed to handle only just startup phase ?
Yes, I'm seeing the same problem. My patch (for lzma support) doesn't help with this kernel bug.
-- Pasi
Boris.
--- On Mon, 8/24/09, Pasi Kärkkäinen pasik@iki.fi wrote:
From: Pasi Kärkkäinen pasik@iki.fi Subject: Re: [Fedora-xen] BZIP2 and LZMA support patch for Xen PV domU bootloader To: "Boris Derzhavets" bderzhavets@yahoo.com Cc: "Mark McLoughlin" markmc@redhat.com, fedora-xen@redhat.com Date: Monday, August 24, 2009, 8:26 AM
On Mon, Aug 24, 2009 at 04:22:30AM -0700, Boris Derzhavets wrote:
Fresh install Xen 3.4.1 via xen-3.4.1-1.src.rpm with LZMA support patch + libvirt 0.7.0-6 (preview) tested OK with F11 PV DomU install. Kernel (supporting Dom0 ) - 2.6.30.2 xenified aka Suse
Attempt to install F12 PV DomU ( Core2Duo E8400, 8 GB RAM ,SATA ) :-
[root@ServerXenSRC ~]# virt-install --debug -n f12pv -r 1024 --vcpus=1 \ -f /dev/sda12 --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os"
Mon, 24 Aug 2009 14:36:36 DEBUG Launched with command line: /usr/sbin/virt-install --debug -n f12pv -r 1024 --vcpus=1 -f /dev/sda12 --vnc -p -l ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os Mon, 24 Aug 2009 14:36:36 DEBUG Requesting libvirt URI default Mon, 24 Aug 2009 14:36:36 DEBUG Received libvirt URI xen:/// Mon, 24 Aug 2009 14:36:36 DEBUG Requesting virt method 'xen', hv type 'default'. Mon, 24 Aug 2009 14:36:36 DEBUG Received virt method 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG Hypervisor name is 'xen' Mon, 24 Aug 2009 14:36:36 DEBUG DistroInstaller location is a network source.
Starting install... Mon, 24 Aug 2009 14:36:36 DEBUG Attempting to detect distro: Mon, 24 Aug 2009 14:36:37 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/.treeinfo Mon, 24 Aug 2009 14:36:39 DEBUG Saved file to /var/lib/xen/virtinst-.treeinfo.WVH7xk Retrieving file .treeinfo... | 1.2 kB 00:00 Mon, 24 Aug 2009 14:36:39 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/vmlinuz Mon, 24 Aug 2009 14:37:11 DEBUG Saved file to /var/lib/xen/virtinst-vmlinuz.gFkrVE kB/s | 3.5 MB 00:30 Retrieving file vmlinuz... | 3.5 MB 00:30 Mon, 24 Aug 2009 14:37:11 DEBUG Fetching URI: ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os/images/pxeboot/initrd.img Mon, 24 Aug 2009 14:40:23 DEBUG Saved file to /var/lib/xen/virtinst-initrd.img.IFk0Bn/s | 22 MB 03:10 Retrieving file initrd.img... | 22 MB 03:10 Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS type as: linux Mon, 24 Aug 2009 14:40:23 DEBUG Auto detected OS variant as: fedora12 Mon, 24 Aug 2009 14:40:23 DEBUG Creating guest from:
<domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <os> <type arch='x86_64'>linux</type> <kernel>/var/lib/xen/virtinst-vmlinuz.gFkrVE</kernel> <initrd>/var/lib/xen/virtinst-initrd.img.IFk0Bn</initrd> <cmdline>method=ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/x86_64/os </os> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>destroy</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Creating domain... | 0 B 00:01 Mon, 24 Aug 2009 14:40:24 DEBUG Created guest, looking to see if it is running Mon, 24 Aug 2009 14:40:24 DEBUG Launching console callback Mon, 24 Aug 2009 14:40:24 DEBUG Saving XML boot config:
<domain type='xen'> <name>f12pv</name> <currentMemory>1048576</currentMemory> <memory>1048576</memory> <uuid>3279f520-308c-127c-c7e6-be66fb36fa7b</uuid> <bootloader>/usr/bin/pygrub</bootloader> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <vcpu>1</vcpu> <devices> <disk type='block' device='disk'> <source dev='/dev/sda12'/> <target dev='xvda' bus='xen'/> </disk> <interface type='bridge'> <source bridge='eth0'/> <mac address='00:16:36:23:d9:66'/> </interface> <input type='mouse' bus='xen'/> <graphics type='vnc' port='-1' keymap='en-us'/> </devices> </domain>
Virt-viewer hangs with message "Waiting for guest domain to be created"
Check "xm log" - for me the guest crashes immediately.
This is a known bug in F12/rawhide kernel.
-- Pasi
On Thu, Aug 20, 2009 at 09:58:25AM +0100, Daniel P. Berrange wrote:
On Wed, Aug 19, 2009 at 11:48:54PM +0300, Pasi K?rkk?inen wrote:
Hello again!
I'm running Fedora 11 with 2.6.31-rc6 pv_ops Xen dom0 kernel and Xen 3.4.1. I'm able to succesfully install Fedora 11 and CentOS 5.3 PV guests with virt-install.
I just tried installing Fedora rawhide (F12) guest with virt-install, and the installation fails.
# virt-install --debug -n test3vm -r 512 --vcpus=1 -f /dev/vg_dom0test/test3vm --vnc -p -l "ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/development/i386/os"
Log of the virt-install output available here: http://pasik.reaktio.net/fedora/virt-install-log-rawhide-on-f11.txt
Basicly it creates the domain, but it fails to start:
# xm list
Name ID Mem VCPUs State Time(s) Domain-0 0 986 2 r----- 595.1 test3vm 512 1 0.0
and virt-install gives these errors:
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Those are printed repeatedly over and over again.. until I cancel the installation with ctrl+c.
This message
Wed, 19 Aug 2009 21:20:40 DEBUG Launching console callback
shows that virt-install things it is working, and so spawned virt-viewer.
libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName libvir: Xen error : Domain not found: xenUnifiedDomainLookupByID
are coming from virt-viewer program.
Back to this issue after the LZMA stuff was sorted out :)
You're right.. those errors are coming from virt-viewer:
# virt-viewer foo-bar-non-existing-domain libvir: Xen error : Domain not found: xenUnifiedDomainLookupByName
Btw there's a typo in the error msg;)
The actual problem seems to be this:
[2009-08-23 20:26:51 1046] INFO (XendDomain:1180) Domain test3vm (9) unpaused. [2009-08-23 20:26:51 1046] WARNING (XendDomainInfo:1878) Domain has crashed: name=test3vm id=9.
So the rawhide/F12 kernel crashes immediately.. nothing on the console(s).
Any ideas? I guess this is related to the other known problems with the 2.6.31 kernel as PV domU?
-- Pasi
-
Boris Derzhavets -
Daniel P. Berrange -
Mark McLoughlin -
Pasi Kärkkäinen