9:37 a.m.
Attempt to create F14 DomU :
name="VF14"
memory=2048
disk = ['file:/tmp/disk1.img,xvda,w' ]
vif = [ 'bridge=br0' ]
# vfb = [ 'type=vnc,vncunused=1']
kernel = "/home/boris/fedora/vmlinuz"
ramdisk = "/home/boris/fedora/initrd.img"
vcpus=2
on_reboot = 'restart'
on_crash = 'restart'
# xl create -c f14.install
Parsing config file f14.install
Daemon running with PID 3311
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.6-45.fc14.x86_64
(mockbuild(a)x86-02.phx2.fedoraproject.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4)
(GCC) ) #1 SMP Mon Oct 18 23:57:44 UTC 2010
[ 0.000000] Command line:
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000
[
0.000000] RAMDISK: 01e63000 - 058c0000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000080000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000001e42880 - 0000000001e5687f]
[ 0.000000] bootmap [0000000005cf6000 - 0000000005d05fff] pages 10
[ 0.000000] (9/32 early reservations) ==> bootmem [0000000000 - 0080000000]
[ 0.000000] #0 [0005cc3000 - 0005cf6000] XEN PAGETABLES ==> [0005cc3000 -
0005cf6000]
[ 0.000000] #1 [0001000000 - 0001e42878] TEXT DATA BSS ==> [0001000000 -
0001e42878]
[ 0.000000] #2 [0001e63000 -
00058c0000] RAMDISK ==> [0001e63000 - 00058c0000]
[ 0.000000] #3 [00058c0000 - 0005cc3000] XEN START INFO ==> [00058c0000 -
0005cc3000]
[ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 -
0000003000]
[ 0.000000] #5 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 -
0000007000]
[ 0.000000] #6 [0000100000 - 00004cd000] PGTABLE ==> [0000100000 -
00004cd000]
[ 0.000000] #7 [0001e42880 - 0001e56880] NODE_DATA ==> [0001e42880 -
0001e56880]
[ 0.000000] #8 [0005cf6000 -
0005d06000] BOOTMAP ==> [0005cf6000 - 0005d06000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC
present
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.0-rc2 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005d3c000 s90496 r8192 d24192
u122880
[ 0.000000] pcpu-alloc: s90496 r8192 d24192 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order,
mobility grouping on. Total pages: 516044
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1984848k/2097152k available (4548k kernel code, 388k absent,
111916k reserved, 7261k data, 944k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is
disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:288
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2833.086 MHz processor.
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency..
5666.17 BogoMIPS (lpj=2833086)
[ 0.000999] pid_max: default: 32768 minimum: 301
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Dentry cache hash table entries: 262144
(order: 9, 2097152 bytes)
[ 0.001643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001999] Mount-cache hash table entries: 256
[ 0.002144] Initializing cgroup subsys ns
[ 0.002155] Initializing cgroup subsys cpuacct
[ 0.002163] Initializing cgroup subsys memory
[ 0.002185] Initializing cgroup subsys devices
[ 0.002192] Initializing cgroup subsys freezer
[ 0.002198] Initializing cgroup subsys net_cls
[ 0.002204] Initializing cgroup subsys blkio
[ 0.002264] CPU: Unsupported number of siblings 4
[ 0.002272] Performance Events: unsupported p6 CPU model 23 no PMU driver, software
events only.
[ 0.002336] SMP alternatives: switching to UP code
[ 0.002999] ftrace:
converting mcount calls to 0f 1f 44 00 00
[ 0.002999] ftrace: allocating 23839 entries in 94 pages
[ 0.003345] installing Xen timer for CPU 1
[ 0.003379] SMP alternatives: switching to SMP code
[ 0.000999] CPU: Unsupported number of siblings 4
[ 0.004107] Brought up 2 CPUs
[ 0.004210] devtmpfs: initialized
[ 0.009241] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.009262] Grant table initialized
[ 0.028254] Time: 165:165:165 Date: 165/165/65
[ 0.028299] NET: Registered protocol family 16
[ 0.029088] PCI: Fatal: No config space access function found
[ 0.030649] bio: create slab <bio-0> at 0
[ 0.030649] ACPI: Interpreter disabled.
[
0.031025] xen_balloon: Initialising balloon driver.
[ 0.031058] vgaarb: loaded
[ 0.031180] SCSI subsystem initialized
[ 0.031303] usbcore: registered new interface driver usbfs
[ 0.031303] usbcore: registered new interface driver hub
[ 0.031313] usbcore: registered new device driver usb
[ 0.032084] PCI: System does not support PCI
[ 0.032091] PCI: System does not support PCI
[ 0.032245] NetLabel: Initializing
[ 0.032245] NetLabel: domain hash size = 128
[ 0.032245] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.032245] NetLabel: unlabeled traffic allowed by default
[ 0.032245] Switching to clocksource xen
[ 0.046227] pnp: PnP ACPI: disabled
[
0.048124] NET: Registered protocol family 2
[ 0.048286] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.049499] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.050962] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.051317] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.051325] TCP reno registered
[ 0.051341] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.051367] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.051464] NET: Registered protocol family 1
[ 0.051544] Trying to unpack rootfs image as initramfs...
[ 0.130231] Freeing initrd memory: 59764k freed
[ 0.151159] platform rtc_cmos: registered platform RTC device (no
PNP device found)
[ 0.151588] audit: initializing netlink socket (disabled)
[ 0.151611] type=2000 audit(1296486517.664:1): initialized
[ 0.160610] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.162444] VFS: Disk quotas dquot_6.5.2
[ 0.162497] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.163020] msgmni has been set to 3993
[ 0.163870] alg: No test for stdrng (krng)
[ 0.163953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.163970] io scheduler noop registered
[ 0.163976] io scheduler deadline registered
[ 0.164032] io scheduler cfq registered (default)
[ 0.164188] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.164224] pciehp:
PCI Express Hot Plug Controller Driver version: 0.4
[ 0.164231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.164247] pci-stub: invalid id string ""
[ 0.164855] Non-volatile memory driver v1.3
[ 0.164863] Linux agpgart interface v0.103
[ 0.164914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.166386] brd: module loaded
[ 0.167028] loop: module loaded
[ 0.167169] Fixed MDIO Bus: probed
[ 0.167227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.167250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.167270] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.167321] PNP: No PS/2 controller found. Probing ports directly.
[
0.168056] mice: PS/2 mouse device common for all mice
[ 0.168394] rtc_cmos: probe of rtc_cmos failed with error -16
[ 0.168475] device-mapper: uevent: version 1.0.3
[ 0.168635] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised:
dm-devel(a)redhat.com
[ 0.168788] cpuidle: using governor ladder
[ 0.168795] cpuidle: using governor menu
[ 0.169094] usbcore: registered new interface driver hiddev
[ 0.169115] usbcore: registered new interface driver usbhid
[ 0.169122] usbhid: USB HID core driver
[ 0.169145] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.169290] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 0.169304] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option
or
[ 0.169312] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 0.169376] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.169395] TCP cubic registered
[ 0.169401] Initializing XFRM netlink socket
[ 0.169411] NET: Registered protocol family 17
[ 0.169536] registered taskstats version 1
[ 0.169557] XENBUS: Device with no driver: device/vbd/51712
[ 0.169563] XENBUS: Device with no driver: device/vif/0
[ 0.169578] Magic number: 1:252:3141
[ 0.169597] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.169614] Initalizing network drop monitor service
[ 0.169776] Freeing unused kernel memory: 944k freed
[ 0.170033] Write protecting the kernel read-only data:
10240k
[ 0.174701] Freeing unused kernel memory: 1576k freed
[ 0.175744] Freeing unused kernel memory: 1836k freed
[9;0][8]
Greetings.
anaconda installer init version 14.22 starting
mounting /proc filesystem... done
(process:1): GLib-CRITICAL **: g_hash_table_lookup_extended: assertion `hash_table !=
NULL' failed
creating /dev filesystem... done
starting udev...done
mounting /dev/pts (unix98 pty) filesystem... done
mounting /sys filesystem... done
(process:1): GLib-CRITICAL **: g_hash_table_lookup_extended: assertion `hash_table !=
NULL' failed
anaconda installer init version 14.22 using /dev/hvc0 as console
trying to remount root filesystem read write... done
mounting /tmp as tmpfs... done
(process:1): GLib-CRITICAL **: g_hash_table_lookup_extended: assertion `hash_table !=
NULL' failed
running install...
running /sbin/loader
detecting
hardware...
waiting for hardware to initialize...
Boris.
--- On Mon, 1/31/11, W. Michael Petullo <mike(a)flyn.org> wrote:
From: W. Michael Petullo <mike(a)flyn.org>
Subject: Re: [Fedora-xen] 2.6.38-rc dom0 kernel and xen 4.1.0-rc2
To: xen(a)lists.fedoraproject.org
Date: Monday, January 31, 2011, 8:40 AM
>>> I have finally got a domU to boot in this sort of
situation, having
>>> found a few bugs in 4.1.0-rc2 on the way when trying to use pygrub
>>> as a bootloader. Note that you may have to use xl rather than xm
>>> because they are deprecating xm and xm may not have support for qemu
>>> block backends.
>> Does anyone know where I can find documentatin on domain
configuration
>>
for xl? There does not seem to be a man page and a review of the Xen Wiki
>> did not find authoritative documentation. I am trying to
figure out how
>> to write an xl configuration, i.e., rewrite xmexample1 to work with xl.
> It is supposed to be a direct replacement for xm, the idea being
for
> configuration files for xm to work for xl, though not necessarily the
> other way around. In practice, you can still find stuff that doesn't yet
> work.
With the exception that xl doesn't support embedded python code
in the cfgfiles.
I am able to boot a DomU kernel using
xl with xen-4.1.0-0.1.rc2.fc14.x86_64 and
kernel-2.6.38-0.rc2.git3.2.xendom0.fc15.x86_64. Both block and network
devices work.
--
Mike
:wq
--
xen mailing list
xen(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/xen
4834
days inactive
4834
days old
0 comments
1 participants
participants (1)
-
Boris Derzhavets