Re: [cobbler] linux16/initrd16 and PXE
pxelinux.0 does seem to be the culprit.
If I force the DHCP to fail during PXE boot, the BIOS falls thru to the local disk and all
is good.
So where can I get a better pxelinux.0 ?
JLM
---
Jeremy Mordkoff
RIFT.io
77 S Bedford St, Burlington, MA 01803
________________________________________
From: cobbler-bounces(a)lists.fedorahosted.org
<cobbler-bounces(a)lists.fedorahosted.org> on behalf of Daniele Gregori
<Daniele.Gregori(a)e4company.com>
Sent: Tuesday, April 14, 2015 6:17 PM
To: cobbler mailing list
Subject: Re: [cobbler] linux16/initrd16 and PXE
A question, the second boot (after installation) becomes in hang if you disconnect the
ethernet cable?
In my setup I found that the cause was the pxelinux.0 file adopted by the dhcp server, I
changed it with an old version one to solve.
Daniele
Il giorno 14/apr/2015, alle ore 23:00, Jeremy Mordkoff
<jeremy.mordkoff@riftio.com<mailto:jeremy.mordkoff@riftio.com>> ha scritto:
I know this is not strictly a cobbler question.....
I use cobbler to install FC21. I end up with a grub file with init16 and linux16 in it.
The system will boot if the BIOS is set to boot from the disk, but it hangs if I let it
PXE boot and then chainload (is that the right word) to the local disk.
Also, it will work with PXE if I change initrd16 to initrd and linux16 to linux
Any suggestions? Right now I am simply munging the grub config file in my kickstart
script.
JLM
---
Jeremy Mordkoff
RIFT.io
77 S Bedford St, Burlington, MA 01803
_______________________________________________
cobbler mailing list
cobbler@lists.fedorahosted.org<mailto:cobbler@lists.fedorahosted.org>
https://lists.fedorahosted.org/mailman/listinfo/cobbler
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler