#20: package myHDL
----------------------+-----------------------------------------------------
Reporter: chitlesh | Owner: chitlesh
Type: task | Status: new
Priority: major | Milestone: Fedora 12
Component: FEL | Version: devel
Keywords: |
----------------------+-----------------------------------------------------
Upstream was contacted to encourage them to package myHDL for FEL.
Upstream responded by saying he will ask his community.
--
Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/20>
Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab>
Design, Simulate and Program electronics.
#17: improve dia for system level
----------------------------+-----------------------------------------------
Reporter: chitlesh | Owner: chitlesh
Type: defect | Status: new
Priority: major | Milestone: Fedora 12
Component: digital design | Version: devel
Keywords: |
----------------------------+-----------------------------------------------
Dia is known to seduce some system level designers and is used to describe
different block levels for embedded design.
Additional shapes for digital blocks would improve user documentation
experience, through neat functional diagram drawn by dia.
http://dia-installer.de/shapes.html
--
Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/17>
Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab>
Design, Simulate and Program electronics.
#14: Component libraries
-------------------------+--------------------------------------------------
Reporter: anonymous | Owner: chitlesh
Type: enhancement | Status: new
Priority: trivial | Milestone:
Component: FEL | Version: 10
Keywords: |
-------------------------+--------------------------------------------------
HI,
I love the concept of FEL and I have FEL 10 installed. I have tried
gSchem and Kicad before and the main problems I have are the lack of a
broad component library. Will there be a move to create a component
library to share? I see a site that has a conversion of Eagle libraries
but I am not sure as to the legality or quality.
Without offense, having gSchem, Kicad, and Xcircuit in the release, it
seems like a lack of direction. I would pay for a GPL release that was
focused and had a solid user supported component libraries. I ma not a
great programmer so I am not sure how I can help.
duncan.mcnamara(a)gmail.com
--
Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/14>
Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab>
Design, Simulate and Program electronics.
#15: FEL with source + build packages
-------------------------+--------------------------------------------------
Reporter: shakthimaan | Owner: chitlesh
Type: enhancement | Status: new
Priority: major | Milestone: Fedora 11 'Leonidas'
Component: FEL | Version: devel
Keywords: Source |
-------------------------+--------------------------------------------------
I would like FEL to include source packages with documentation for various
FEL tools that it ships with for the following reasons:
1. It should be a distro that one can install, use, and develop, without
the need for an Internet connection. For upgrades, developers can obtain
patches and re-build.
2. There are many people who are on dial-up in remote places in India, and
the speeds are slow. It takes a really long time to download the source
packages or refer documentation. It is only useful for chatting. And most
of them on dial-up are on winmodems, and don't have driver support with
Fedora.
3. It will be helpful to deploy this standalone solution in a lab.
If the above can be done, it will be an off-the-shelf distro that one can
simply install and use for learning, development and testing.
I think FEL uses only 1.3 GB, so disk space shouldn't be an issue.
--
Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/15>
Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab>
Design, Simulate and Program electronics.
#21: package veditor for eclipse
----------------------+-----------------------------------------------------
Reporter: chitlesh | Owner: chitlesh
Type: task | Status: new
Priority: major | Milestone: Fedora 12
Component: FEL | Version: devel
Keywords: |
----------------------+-----------------------------------------------------
Looking for a volunteer to co-maintain veditor.
See draft spec file in the attachment.
--
Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/21>
Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab>
Design, Simulate and Program electronics.
Hello there,
I just want to inform you that you can create liveusb to demonstrate
FEL at any events:
https://fedoraproject.org/wiki/How_to_create_and_use_Live_USB
Example:
# livecd-iso-to-disk --reset-mbr --overlay-size-mb 2047 MYFEDORA.iso /dev/sdb1
cheers,
Chitlesh
I was going through the list which I got in today's newsletter and to
my surprise I found FEL in the list along with some other FOSS EDA
tools. Felt like sharing this news.
http://opencores.org/?do=newsletter&2009=05#n5
--
Regards
Rangeen Basu Roy Chowdhury
Fedora Ambassador
sherry151(a)gmail.com
Sent from Calcutta, WB, India
Dear Sir or Madam,
This is Andy from SAYFU Technology Co., Ltd. Through the internet we acquired your esteemed company name, and we take the liberty of writing this e-mail to you looking for future opportunity of cooperation.
SAYFU from China, which is a professional PCB/FPCB supplier with ISO-9001 and UL approval in China. We focus on quick-turn prototype and small-medium volume for 2-30 layer boards, I just wanted to give you a quick note and see if there is anything I can help you with PCBs fabrication.
1. Products range: Rigid PCB up to 30 layers, FPC, Flex-Rigid, Aluminium PCB, Heavy copper boards(3-10 Oz), Buried-blind vias holes ....
Material range: FR-4 (130TG-180TG), CEM1, Halogen free laminate, Rogers, Teflon, Aluminum Based, ISOLA, Nelco....
Technology Capability: Min. 3mil/3mil Trace/space, heavy copper board (3-10 Oz) , 4 mil Smallest Drill Size ...
2. No miminum order quantity requirement. You can put 1 piece, 100 piece or large quantity jobs to us, and in return, what we will provide to you are the same quality services and quality products.
3. Quick turn lead time at reasonable Price. We can be delivered double-sided PCBs in 24 hours and four-layer PCBs 48 hours
4. Excellent customer service and quick response. We can send you quotes and inquiry responses in two hours or less.
Hope we could help you to extend the business and to be more competitive and both have a fruitful partnership.
For more information about our products and services, pls e-mail us or visit our website (www.sayfupcb.com ) we sincerely hope to establish a long-term relationship with you in the future and look forward to hearing from you soon.
Andy Liu
Sales Department
Tel: +86-755-2641 7916
Fax: +86-755-2641 7917
Mobile:+86-135 1077 1602
Skype: sayfupcb
MSN: sayfupcb(a)hotmail.com
E-mail: andy.liu(a)sayfupcb.com
Backup: sayfupcb(a)gmail.com
Website: www.sayfupcb.com
SAYFU TECHNOLOGY CO.,LIMITED