New 10.1.2 build os303 for XO-1 and XO-1.5

[Chris Ball]

http://build.laptop.org/10.1.2/xo-1/os303
http://build.laptop.org/10.1.2/xo-1.5/os303

Compressed image size: 595.62mb (no change from build 302)

Description of changes in this build:

* kernel, #9323: Fix viafb color corruption on VT after suspend/resume
* sugar, #10213: Fix frame key on UY High School laptop
* sugar, #10261: Fix "sugar-control-panel -c registration"
* sugar, #9623:  Backport disk full fix to 0.84
* powerd: Inhibit suspend when the XO-1 camera is running.

Package changes since build 302:

-kernel-2.6.31_xo1-20100714.1740.1.olpc.1eac9a942c72b10.i586
+kernel-2.6.31_xo1-20100728.1841.1.olpc.a0a0edb7d8cbadb.i586
-kernel-firmware-2.6.31_xo1-20100714.1740.1.olpc.1eac9a942c72b10.i586
+kernel-firmware-2.6.31_xo1-20100728.1841.1.olpc.a0a0edb7d8cbadb.i586
-olpc-powerd-25-1.fc11.i586
+olpc-powerd-26-1.fc11.i586
-olpc-powerd-dbus-25-1.fc11.i586
+olpc-powerd-dbus-26-1.fc11.i586
-sugar-0.84.18-1.fc11.i586
+sugar-0.84.20-1.fc11.i586

[Mikus Grinbergs]

>  http://build.laptop.org/10.1.2/xo-1.5/os303 
Has XO-1.5 development use of http://build.laptop.org/10.1.2/xo-1.5/ now
supplanted development use of http://build.laptop.org/10.2.0/  ?

Thanks, mikus

[Chris Ball]

Hi,

>  Has XO-1.5 development use of
>  http://build.laptop.org/10.1.2/xo-1.5/ now supplanted development
>  use of http://build.laptop.org/10.2.0/ ? 
Yes.  (Until 10.1.2 is released.)

- Chris.
-- 
Chris Ball   <cjb(a)laptop.org&gt;
One Laptop Per Child

[Yioryos Asprobounitis]

--- On Fri, 7/30/10, Chris Ball <cjb(a)laptop.org&gt; wrote:

>  From: Chris Ball <cjb(a)laptop.org&gt;
>  Subject: New 10.1.2 build os303 for XO-1 and XO-1.5
>  To: "Fedora OLPC" <fedora-olpc-list(a)redhat.com&gt;
>  Cc: "Devel" <devel(a)lists.laptop.org&gt;
>  Date: Friday, July 30, 2010, 5:25 PM
>  http://build.laptop.org/10.1.2/xo-1/os303
>  http://build.laptop.org/10.1.2/xo-1.5/os303
>  
>  Compressed image size: 595.62mb (no change from build 302)
>   
I olpc-update an XO-1 and an XO-1.5 from os302.
The good news is that XO-1 update fits nicely and still has 250MB space available. So two
F11 builds for the XO-1 are ok and I assume an F9/os802 and an F11 should be ok as long as
there are ~300MB available.
The bad news is that the XO-1.5 froze at the end of the update (was left unattended for
~30 min plugged in the AC). I had to hard reboot (power button for 5 sec) and then worked
fine running os303. 
I didn't see that on the XO-1 but was not left after alone the update. Maybe a powerd
issue?