7:55 p.m.
谢谢bbbush的回复，
selinux之前已经关闭了touch /.autorelabel 也已经做了;
一会我打算用clonezilla live usb做一下;在为tar打包完成后，就提醒过tar文件有改动。
2012/12/6 Yuan Yijun <bbbush.yuan(a)gmail.com>
猜测： tar 不保留 selinux label，所以需要 touch /.autorelabel && reboot
2012/12/6 Johnny Tao <johnnybeijing(a)gmail.com>
> 我遇到的plymouthd问题类似这个：https://bugzilla.redhat.com/show_bug.cgi?id=830568
>
>
> 2012/12/6 Johnny Tao <johnnybeijing(a)gmail.com>
>
> > 今天使用tar来备份和还原系统问题多多，现在grub2已经过了，卡在了接下来启动画面的plymouthd位置
> >
> > chroot后执行了systemctl mask plymouth-start.service 也没有帮助，请教大家一下呢
> >
> >
> >
> > 说下我备份/还原的大体步骤
> >
> > 1. 首先我依次备份了/ 和 /boot系统，解压到新的ssd磁盘分区中;
> >
> > #/
> > tar cvpzf backup.tgz / --exclude=/proc --exclude=/sys
> > --exclude=/lost+found --exclude=/media --exclude=/mnt
> --exclude=backup.tgz
> > --exclude=/home --exclude=/boot --exclude=/run
> >
> > #boot
> > tar cvpzf boot.tgz /boot
> >
> > 2. 分别更新的UUID对应到新的分区/etc/fsta和/etc/grub2/grub.cfg
> >
> >
> >
> >
> >
> >
> > On Wed, Dec 5, 2012 at 1:54 PM, Johnny Tao <johnnybeijing(a)gmail.com
> >wrote:
> >
> >> @Tommy He，谢谢回复～
> >> 看了下当前的分区表为msdos，一共就120G的SSD好像没有必要玩UEFI了意义可能不大;
> >> 我的这台X230i的BIOS里面也好像有UEFI的选项
> >>
> >> [jtao@johnny-laptop Downloads]$ sudo parted /dev/sda print
> >> Model: ATA ST320LT007-9ZV14 (scsi)
> >> Disk /dev/sda: 320GB
> >> Sector size (logical/physical): 512B/4096B
> >> Partition Table: msdos
> >> Disk Flags:
> >>
> >> Number Start End Size Type File system Flags
> >> 1 1049kB 525MB 524MB primary ext4 boot
> >> 2 525MB 54.2GB 53.7GB primary ext4
> >> 3 54.2GB 60.2GB 6006MB primary linux-swap(v1)
> >> 4 60.2GB 320GB 260GB extended
> >> 5 60.2GB 320GB 260GB logical ext4
> >>
> >>
> >>
> >>
> >> On Wed, Dec 5, 2012 at 1:34 PM, Tommy He <
lovenemesis(a)fedoraproject.org
> >wrote:
> >>
> >>> 题外话：其实吧，我觉得这个好机会转向使用 GPT 分区表，未来升级 UEFI 的机子也方便……
> >>>
> >>> On Wed, Dec 5, 2012 at 12:01 PM, Johnny Tao
<johnnybeijing(a)gmail.com
>
> >>> wrote:
> >>> > 不好意思前面邮件没说清楚;sda为现在正在使用的320g的机械硬盘装有Fedora17
> >>> >
> >>>
>
64bit，sdb作为目标ssd磁盘尚未分区，使用USB盒子连到我的笔记本电脑，我想到的步骤是，不知道是否有更简单的方法？麻烦大家帮忙看下，是否tar/dump会更简单?
> >>> >
> >>> > 1. 使用fdisk/cfdisk
> >>> > 为sdb分区分别为500M(/boot)，20G(/)，4G(swap，现在内存升级到10g这个区也可不要)，剩余给(/home)
> >>> > 2.
> 使用clonezilla把sda现有的分区依次克隆到sdb的每个分区中（不保护swap），这里可能要查一下跳过目标磁盘大于源磁盘的参数
> >>> > 3. 使用sdb作为启动盘，修复grub2的启动项，版本2的步骤还不清楚，回头查下文档。
> >>> >
> >>> >
> >>> > 这里是sda的fstab
> >>> >
> >>> > [jtao@johnny-laptop ~]$ cat /etc/fstab
> >>> >
> >>> > #
> >>> > # /etc/fstab
> >>> > # Created by anaconda on Thu Nov 29 10:28:58 2012
> >>> > #
> >>> > # Accessible filesystems, by reference, are maintained under
> >>> '/dev/disk'
> >>> > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for
> more
> >>> info
> >>> > #
> >>> > UUID=97481eda-a608-4bee-ace8-faa0d59ad677 /
> ext4
> >>> > defaults 1 1
> >>> > UUID=a615302b-eae4-4bad-a553-1e7c473b7223 /boot
> ext4
> >>> > defaults 1 2
> >>> > UUID=098f62c4-4f33-4c0d-82a9-98d203be4a1f /home
> ext4
> >>> > defaults 1 2
> >>> > UUID=cec9ee8e-7893-478c-afc2-2c440a7c3579 swap
> swap
> >>> > defaults 0 0
> >>> >
> >>> >
> >>> >
> >>> > On Tue, Dec 4, 2012 at 4:11 PM, Christopher Meng <
cickumqt(a)gmail.com
> >
> >>> wrote:
> >>> >
> >>> >> 每个设备文件代表什么？哪个是Fedora的？
> >>> >>
> >>> >>
> >>> >>
> >>> >> *Yours sincerely,*
> >>> >> *Christopher Meng*
> >>> >>
> >>> >> Ambassador/Contributor of Fedora Project and many others.
> >>> >> http://cicku.me
> >>> >> http://mirrors.cicku.me
> >>> >>
> >>> >>
> >>> >>
> >>> >> On Tue, Dec 4, 2012 at 4:01 PM, Johnny Tao <
johnnybeijing(a)gmail.com
> >
> >>> >> wrote:
> >>> >>
> >>> >> > 想省事直接克隆过去，麻烦大家给点建议，谢谢
> >>> >> >
> >>> >> > target：120g SSD
> >>> >> > source：320g 机械硬盘，分区如下
> >>> >> >
> >>> >> > [jtao@johnny-laptop Scripts]$ sudo fdisk -l /dev/sda
> >>> >> >
> >>> >> > Disk /dev/sda: 320.1 GB, 320072933376 bytes
> >>> >> > 255 heads, 63 sectors/track, 38913 cylinders, total
625142448
> >>> sectors
> >>> >> > Units = sectors of 1 * 512 = 512 bytes
> >>> >> > Sector size (logical/physical): 512 bytes / 4096 bytes
> >>> >> > I/O size (minimum/optimal): 4096 bytes / 4096 bytes
> >>> >> > Disk identifier: 0x00077a05
> >>> >> >
> >>> >> > Device Boot Start End Blocks Id
System
> >>> >> > /dev/sda1 * 2048 1026047 512000 83
Linux
> >>> >> > /dev/sda2 1026048 105883647 52428800 83
Linux
> >>> >> > /dev/sda3 105883648 117614591 5865472 82
Linux
> swap /
> >>> >> > Solaris
> >>> >> > /dev/sda4 117614592 625142447 253763928 5
Extended
> >>> >> > /dev/sda5 117616640 625141759 253762560 83
Linux
> >>> >> > --
> >>> >> > Fedora中文�件列表：
> >>> https://admin.fedoraproject.org/mailman/listinfo/chinese
> >>> >> >
> >>> >>
> >>> >> --
> >>> >> Fedora中文�件列表：
> https://admin.fedoraproject.org/mailman/listinfo/chinese
> >>> >>
> >>> >>
> >>> >
> >>> > --
> >>> > Fedora中文�件列表：
> https://admin.fedoraproject.org/mailman/listinfo/chinese
> >>> >
> >>>
> >>>
> >>>
> >>> --
> >>> Take a Deep Breath out of Windows
> >>>
> >>> https://fedoraproject.org/wiki/User:Lovenemesis
> >>> --
> >>> Fedora中文�件列表：
https://admin.fedoraproject.org/mailman/listinfo/chinese
> >>>
> >>
> >>
> >
>
> --
> Fedora中文�件列表：https://admin.fedoraproject.org/mailman/listinfo/chinese
>
>
--
bbbush ^_^
--
Fedora中文�件列表：https://admin.fedoraproject.org/mailman/listinfo/chinese