system-config-display does not work, using Fedora Live cd generated by kadishi

[Antonio Olivares]

Dear all,
   I am writing to you from a Fedora Live CD generated by Kadishi on a Dell Optiplex
GX520.  This is the same computer that generated the messages, spinlock kernel.  No there
are no more of those messages.  The problem is with system-config-display.  Following the
info, I will attach the error message.  Sorry if I put more information than I was
supposed to.

[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.18-1.2699.fc6 #1 SMP Tue Sep 26 23:49:34 EDT 2006 i686
i686 i386 GNU/Linux
[root@localhost ~]# 
[root@localhost ~]# cat /etc/fedora-release 
Fedora Core release 5.92 (FC6 Test3)
[root@localhost ~]# cat /proc/cpuinfo 
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping        : 3
cpu MHz         : 2992.650
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36
clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est cid
cx16 xtpr
bogomips        : 5991.82

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping        : 3
cpu MHz         : 2992.650
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36
clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl est cid
cx16 xtpr
bogomips        : 5985.18

[root@localhost ~]#

[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev
02)
00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics
Controller (rev 02)
00:02.1 Display controller: Intel Corporation 945G/GZ Express Integrated Graphics
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev
01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97
Audio Controller (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev
01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage
Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI
Express (rev 01)
[root@localhost ~]# 

Also how I configured X using Xorg -configure and was successfull getting X to load.

Regards,

Antonio