-PLEASE EXCUSE ME FOR NOISE IF ALREADY POSTED, YAHOO MAIL IS F#*7%@ SH1T ATM-
On Mon May 14 2007 18:27:24 Jasper Hartline wrote:
> dexter wrote:
>> commenting out line 5 gets past this.
>>
>> 2.Next anaconda goes off into an endless loop and doesn't come back!
>> until Ctrl-c.
>>
>> using command:
>>
>> kadischi -C --kickstart=Desktop/minimal-livecd-dex.cfg \
>>
http://www.mirrorservice.org/sites/download.fedora.redhat.com/pub/fedora
>>/linux/core/development/i386/os \ iso/fedora-live.iso
I cannot reproduce this issue.
A few things I can think of are possible filesystem and/or package
corruption
not enough RAM in the machine, slower type processor.
That's about it with the information given.
Can you post the livecd.cfg kickstart file you are actually using that
does this..
and can you also attach the /tmp/anaconda.log when the stalling occurs?
hello jasper,
This box is good enuff 1gb ram athlon-xp 2600 2ghz MSI-6570 sata-promise fake
raid rawhide, using original kickstart minimal.cfg with line 5: langsupport
commented out.
anaconda.log when stalled:
14:48:31 INFO : using only installclass _Fedora
14:48:31 INFO : anaconda called with cmdline =
['/usr/sbin/anaconda', '--kickstart=/home/dexter/mini-ks-cfg.ks',
'--method=http://mirror.atrpms.net/fedoracore/development/i386/os',
'--rootpath=/tmp/kadischi/system', '--cmdline']
14:48:31 INFO : Display mode = c
14:48:31 INFO : Method =
http://mirror.atrpms.net/fedoracore/development/i386/os
14:48:32 INFO : anaconda floppy device fd0
14:48:35 DEBUG : starting mpaths
14:48:35 DEBUG : self.driveList(): ['sda', 'sdb', 'sdc',
'sdd', 'sde']
14:48:35 DEBUG : DiskSet.skippedDisks: []
14:48:35 DEBUG : DiskSet.skippedDisks: []
14:48:35 DEBUG : starting all mpaths on drives
['sda', 'sdb', 'sdc', 'sdd', 'sde']
14:48:35 DEBUG : scanning for multipath on drives
['sda', 'sdb', 'sdc', 'sdd', 'sde']
14:48:35 DEBUG : mpaths: []
14:48:35 DEBUG : done starting mpaths. Drivelist:
['sda', 'sdb', 'sdc', 'sdd', 'sde']
14:48:35 DEBUG : starting dmraids
14:48:35 DEBUG : self.driveList(): ['sda', 'sdb', 'sdc',
'sdd', 'sde']
14:48:35 DEBUG : DiskSet.skippedDisks: []
14:48:35 DEBUG : DiskSet.skippedDisks: []
14:48:35 DEBUG : starting all dmraids on drives
['sda', 'sdb', 'sdc', 'sdd', 'sde']
14:48:35 DEBUG : scanning for dmraid on drives
['sda', 'sdb', 'sdc', 'sdd', 'sde']
I did manage to spin a minimal cd by not using any kickstart file and not
selecting anything from anaconda-gui all rpms were grabbed successfully this
time here is the kickstart file it left:
# dexters minimal-kickstart file for uk-locale
install
url --url
http://mirror.atrpms.net/fedoracore/development/i386/os
lang en_GB.UTF-8
keyboard uk
network --device eth0 --bootproto dchp
rootpw --iscrypted $1$6drK.8lP$hSkRKrJgqtc8W8p7P13.r/
firewall --disabled
authconfig --enableshadow --enablemd5
selinux --disabled
timezone Europe/London
bootloader --location=none
#
#
#
%packages
@british-support
@core
This booted ok after the nash & mkisofs problems mentioned in another email.
Of course feeding this file back into anaconda via kadischi or command line
results in 99% usage failure as above, rpm -V anaconda gives a clean bill of
health.
Trying to select anything ambitious like a kde desktop results in anaconda
trying to grab non existant rpms off the mirrors.
BZ#240038
On another note after about 7 or 8 good runs of kadischi it refused to start
with:
[kadischi]: Checking requirements for Kadischi
rpmdb: Lock table is out of available locker entries
rpmdb: Unknown locker ID: cc2
error: db4 error(22) from dbenv->close: Invalid argument
error: cannot open Packages index using db3 - Cannot allocate memory (12)
error: cannot open Packages database in /var/lib/rpm
Traceback (most recent call last):
File "/usr/share/kadischi/kadischi.py", line 527, in <module>
rc = main()
File "/usr/share/kadischi/kadischi.py", line 38, in main
requirements()
File "/usr/share/kadischi/kadischi.py", line 330, in requirements
missing_rpms = check_installed_rpms ('/', required_rpms, False)
File "/usr/share/kadischi/lib/functions.py", line 39, in
check_installed_rpms
mi = ts.dbMatch ('name', package)
TypeError: rpmdb open failed
seen this before ???
...dex
___________________________________________________________
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" � The
Wall Street Journal
http://uk.docs.yahoo.com/nowyoucan.html