2:48 p.m.
Bruno Wolff III <bruno(a)wolff.to> writes:
Thanks for testing this.
If it works I get a new build out tonight. If not, I'll open a bug copied
to Dan Walsh and get his take on the issue.
I now get a working ISO with SELinux enabled and an apparently correctly
labeled file system. Login and apps seem to work okay. There are a
couple of SELinux violations logged (Network Manager, abrt) but maybe
that is normal?
-- Johan
10:51 p.m.
New subject: Can't log in
On Sun, Sep 26, 2010 at 21:48:41 +0200,
Johan Vromans <jvromans(a)squirrel.nl> wrote:
Bruno Wolff III <bruno(a)wolff.to> writes:
> Thanks for testing this.
> If it works I get a new build out tonight. If not, I'll open a bug copied
> to Dan Walsh and get his take on the issue.
I now get a working ISO with SELinux enabled and an apparently correctly
labeled file system. Login and apps seem to work okay. There are a
couple of SELinux violations logged (Network Manager, abrt) but maybe
that is normal?
Yes and no. For final the release critera includes:
In most cases, there must be no SELinux 'AVC: denied' messages or abrt crash
notifications on initial boot and subsequent login
At this point in development bugs can get introduced. Dan is usually great
at fixing them once he knows about them.
I'll make a new 034 release with the spec file argument in the correct
place. While I don't like to crank out a new release per bug fix (there
were a lot getting some stuff fixed for beta), but this one blocks testing
(by at least one real tester) so I'll get one out shortly.
1:11 a.m.
New subject: Can't log in
Bruno Wolff III <bruno(a)wolff.to> writes:
> I now get a working ISO with SELinux enabled and an apparently
correctly
> labeled file system. Login and apps seem to work okay. There are a
> couple of SELinux violations logged (Network Manager, abrt) but maybe
> that is normal?
Yes and no. For final the release critera includes:
In most cases, there must be no SELinux 'AVC: denied' messages or abrt crash
notifications on initial boot and subsequent login
At this point in development bugs can get introduced. Dan is usually great
at fixing them once he knows about them.
I'll run a new test (respin w/updates-testing) and report the exact
errors.
-- Johan
11:38 p.m.
New subject: Can't log in
On Sun, Sep 26, 2010 at 21:48:41 +0200,
Johan Vromans <jvromans(a)squirrel.nl> wrote:
Bruno Wolff III <bruno(a)wolff.to> writes:
> Thanks for testing this.
> If it works I get a new build out tonight. If not, I'll open a bug copied
> to Dan Walsh and get his take on the issue.
I now get a working ISO with SELinux enabled and an apparently correctly
labeled file system. Login and apps seem to work okay. There are a
couple of SELinux violations logged (Network Manager, abrt) but maybe
that is normal?
I have new builds out for F14 and rawhide. I also made a scratch build for
F13 if you specifically want to try it. These usually hang around for about
a week. The main entry is at:
http://koji.fedoraproject.org/koji/taskinfo?taskID=2490899
Go into the appropriate arch for the rpms.
2:43 p.m.
New subject: Can't log in
On Sun, Sep 26, 2010 at 21:48:41 +0200,
Johan Vromans <jvromans(a)squirrel.nl> wrote:
Bruno Wolff III <bruno(a)wolff.to> writes:
> Thanks for testing this.
> If it works I get a new build out tonight. If not, I'll open a bug copied
> to Dan Walsh and get his take on the issue.
I now get a working ISO with SELinux enabled and an apparently correctly
labeled file system. Login and apps seem to work okay. There are a
couple of SELinux violations logged (Network Manager, abrt) but maybe
that is normal?
There is still something odd though. Since Dan indicated the previous version
was correct, I went and played with setfiles a bit and giving options
after the path seems to work as expected. So some other change is probably
responsible for things starting to work.
Were you using 034 for the earlier tests? Dan's patch was in all of the
034 releases.
2:51 p.m.
New subject: Can't log in
On Mon, Sep 27, 2010 at 14:43:33 -0500,
Bruno Wolff III <bruno(a)wolff.to> wrote:
On Sun, Sep 26, 2010 at 21:48:41 +0200,
Johan Vromans <jvromans(a)squirrel.nl> wrote:
> Bruno Wolff III <bruno(a)wolff.to> writes:
>
> > Thanks for testing this.
> > If it works I get a new build out tonight. If not, I'll open a bug copied
> > to Dan Walsh and get his take on the issue.
>
> I now get a working ISO with SELinux enabled and an apparently correctly
> labeled file system. Login and apps seem to work okay. There are a
> couple of SELinux violations logged (Network Manager, abrt) but maybe
> that is normal?
There is still something odd though. Since Dan indicated the previous version
was correct, I went and played with setfiles a bit and giving options
after the path seems to work as expected. So some other change is probably
responsible for things starting to work.
Were you using 034 for the earlier tests? Dan's patch was in all of the
034 releases.
Going back through the thread, I see that at least one of the tests that
failed you indicated was done with 034. Perhaps some F14 package also got
updated that affected this.
If you see the problem happen again, please let us know.
4:35 p.m.
New subject: Can't log in
Bruno Wolff III <bruno(a)wolff.to> writes:
Going back through the thread, I see that at least one of the tests
that
failed you indicated was done with 034. Perhaps some F14 package also got
updated that affected this.
If you see the problem happen again, please let us know.
I'll run some more tests...
-- Johan
2:43 a.m.
New subject: Can't log in
Johan Vromans <jvromans(a)squirrel.nl> writes:
Bruno Wolff III <bruno(a)wolff.to> writes:
> Going back through the thread, I see that at least one of the tests that
> failed you indicated was done with 034. Perhaps some F14 package also got
> updated that affected this.
>
> If you see the problem happen again, please let us know.
I'll run some more tests...
Respin with repos fedora and fedora-updates, selinux enforced, yields
two AVC denials. Messages attached.
TBC,
Johan
--- 1 ---
Summary:
SELinux is preventing access to files with the label, file_t.
Detailed Description:
SELinux permission checks on files labeled file_t are being denied. file_t is
the context the SELinux kernel gives to files that do not have a label. This
indicates a serious labeling problem. No files on an SELinux box should ever be
labeled file_t. If you have just added a disk drive to the system you can
relabel it using the restorecon command. For example if you saved the home
directory from a previous installation that did not use SELinux, 'restorecon -R
-v /home' will fix the labels. Otherwise you should relabel the entire file
system.
Allowing Access:
You can execute the following command as root to relabel your computer system:
"touch /.autorelabel; reboot"
Additional Information:
Source Context system_u:system_r:NetworkManager_t:s0
Target Context system_u:object_r:file_t:s0
Target Objects network [ file ]
Source NetworkManager
Source Path /usr/sbin/NetworkManager
Port <Unknown>
Host localhost.localdomain
Source RPM Packages NetworkManager-0.8.1-6.git20100831.fc13
Target RPM Packages
Policy RPM selinux-policy-3.7.19-57.fc13
Selinux Enabled True
Policy Type targeted
Enforcing Mode Enforcing
Plugin Name file
Host Name localhost.localdomain
Platform Linux localhost.localdomain 2.6.34.7-56.fc13.i686
#1 SMP Wed Sep 15 03:33:58 UTC 2010 i686 i686
Alert Count 2
First Seen Tue 28 Sep 2010 07:28:17 AM EDT
Last Seen Tue 28 Sep 2010 07:28:17 AM EDT
Local ID 05243d80-2406-4557-bef4-f0fc31fa42e0
Line Numbers
Raw Audit Messages
node=localhost.localdomain type=AVC msg=audit(1285673297.979:7): avc: denied { read }
for pid=923 comm="NetworkManager" name="network" dev=dm-0 ino=64332
scontext=system_u:system_r:NetworkManager_t:s0 tcontext=system_u:object_r:file_t:s0
tclass=file
node=localhost.localdomain type=SYSCALL msg=audit(1285673297.979:7): arch=40000003
syscall=5 success=no exit=-13 a0=5102b3 a1=0 a2=365a3d a3=5102b3 items=0 ppid=1 pid=923
auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none)
ses=4294967295 comm="NetworkManager" exe="/usr/sbin/NetworkManager"
subj=system_u:system_r:NetworkManager_t:s0 key=(null)
--- 2 ---
Summary:
SELinux is preventing access to files with the label, file_t.
Detailed Description:
SELinux permission checks on files labeled file_t are being denied. file_t is
the context the SELinux kernel gives to files that do not have a label. This
indicates a serious labeling problem. No files on an SELinux box should ever be
labeled file_t. If you have just added a disk drive to the system you can
relabel it using the restorecon command. For example if you saved the home
directory from a previous installation that did not use SELinux, 'restorecon -R
-v /home' will fix the labels. Otherwise you should relabel the entire file
system.
Allowing Access:
You can execute the following command as root to relabel your computer system:
"touch /.autorelabel; reboot"
Additional Information:
Source Context system_u:system_r:abrt_t:s0-s0:c0.c1023
Target Context system_u:object_r:file_t:s0
Target Objects macros.imgcreate [ file ]
Source abrtd
Source Path /usr/sbin/abrtd
Port <Unknown>
Host localhost.localdomain
Source RPM Packages abrt-1.1.13-2.fc13
Target RPM Packages
Policy RPM selinux-policy-3.7.19-57.fc13
Selinux Enabled True
Policy Type targeted
Enforcing Mode Enforcing
Plugin Name file
Host Name localhost.localdomain
Platform Linux localhost.localdomain 2.6.34.7-56.fc13.i686
#1 SMP Wed Sep 15 03:33:58 UTC 2010 i686 i686
Alert Count 1
First Seen Tue 28 Sep 2010 07:28:31 AM EDT
Last Seen Tue 28 Sep 2010 07:28:31 AM EDT
Local ID cc2455d2-70e7-4202-9b8a-33957ef0b981
Line Numbers
Raw Audit Messages
node=localhost.localdomain type=AVC msg=audit(1285673311.432:9): avc: denied { read }
for pid=1143 comm="abrtd" name="macros.imgcreate" dev=dm-0 ino=64333
scontext=system_u:system_r:abrt_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0
tclass=file
node=localhost.localdomain type=SYSCALL msg=audit(1285673311.432:9): arch=40000003
syscall=5 success=no exit=-13 a0=8ceab98 a1=8000 a2=1b6 a3=1a75e8 items=0 ppid=1142
pid=1143 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0
tty=(none) ses=4294967295 comm="abrtd" exe="/usr/sbin/abrtd"
subj=system_u:system_r:abrt_t:s0-s0:c0.c1023 key=(null)
--- ---
4 a.m.
New subject: Can't log in
Hi,
those files are created after setfiles is executed in SelinuxConfig,
by NetworkConfig and RPMMacroConfig, see ImageCreator.configure() excerpt:
ksh = self.ks.handler
kickstart.LanguageConfig(self._instroot).apply(ksh.lang)
kickstart.KeyboardConfig(self._instroot).apply(ksh.keyboard)
kickstart.TimezoneConfig(self._instroot).apply(ksh.timezone)
kickstart.AuthConfig(self._instroot).apply(ksh.authconfig)
kickstart.SelinuxConfig(self._instroot).apply(ksh.selinux)
kickstart.FirewallConfig(self._instroot).apply(ksh.firewall)
kickstart.RootPasswordConfig(self._instroot).apply(ksh.rootpw)
kickstart.ServicesConfig(self._instroot).apply(ksh.services)
kickstart.XConfig(self._instroot).apply(ksh.xconfig)
kickstart.NetworkConfig(self._instroot).apply(ksh.network)
kickstart.RPMMacroConfig(self._instroot).apply(self.ks)
self._create_bootconfig()
self.__run_post_scripts()
setfiles should execute last, even after post scripts, to ensure
contexts for all files are set correctly, but then again we probably
need correct selinux contexts in order to run post scripts as well.
Dan, is there any harm running setfiles twice, at the current location
and then once more at the end ?
--- a/imgcreate/creator.py
+++ b/imgcreate/creator.py
@@ -741,6 +741,8 @@ class ImageCreator(object):
self.__run_post_scripts()
+ kickstart.SelinuxConfig(self._instroot).apply(ksh.selinux)
+
def launch_shell(self):
"""Launch a shell in the install root.
10:01 p.m.
New subject: Can't log in
On Tue, Sep 28, 2010 at 11:00:21 +0200,
Alan Pevec <apevec(a)gmail.com> wrote:
setfiles should execute last, even after post scripts, to ensure
contexts for all files are set correctly, but then again we probably
need correct selinux contexts in order to run post scripts as well.
Dan, is there any harm running setfiles twice, at the current location
and then once more at the end ?
It would just be slow, unless you knew you could limit one to just a few
files.
Running it later just once seems best.
5:18 a.m.
New subject: Can't log in
Johan Vromans <jvromans(a)squirrel.nl> writes:
Respin with repos fedora and fedora-updates, selinux enforced,
yields
two AVC denials. Messages attached.
Respin with repos fedora, fedora-updates, and updates-testing, selinux
enforced, yields no AVC denials because it starts in permissive mode,
despite of /etc/reslinux/config containing 'SELINUX=enforcing'.
dmesg shows:
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
This concludes my testing. Suggestions welcome
-- Johan
--- dmesg ---
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34.7-56.fc13.i686 (mockbuild(a)x86-09.phx2.fedoraproject.org) (gcc version
4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Wed Sep 15 03:33:58 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Using x86 segment limits to approximate NX protection
DMI 2.5 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-000000001fff0000
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001fff0000 page 4k
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 1f840000 - 1ffcf000
ACPI: RSDP 000e0000 00024 (v02 VBOX )
ACPI: XSDT 1fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 1fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 1fff0410 018FF (v01 VBOX VBOXBIOS 00000002 INTL 20050309)
ACPI: FACS 1fff0200 00040
ACPI: SSDT 1fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20050309)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 0 - 1fff0000
node 0 low ram: 00000000 - 1fff0000
node 0 bootmap 0000a000 - 0000e000
(9/32 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#1 [0000400000 - 0000b33130] TEXT DATA BSS ==> [0000400000 - 0000b33130]
#2 [001f840000 - 001ffcf000] RAMDISK ==> [001f840000 - 001ffcf000]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0000b34000 - 0000b38071] BRK ==> [0000b34000 - 0000b38071]
#5 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
#6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#7 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#8 [000000a000 - 000000e000] BOOTMAP ==> [000000a000 - 000000e000]
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130958
free_area_init_node: node 0, pgdat c09b5d40, node_mem_map c1001020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1800000 s34324 r0 d23020 u4194304
pcpu-alloc: s34324 r0 d23020 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934
Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora13Live-20100928
rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2621100 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 501532k/524224k available (3671k kernel code, 22300k reserved, 2301k data, 548k
init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xe07f0000 - 0xff3fe000 ( 492 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc09d6000 - 0xc0a5f000 ( 548 kB)
.data : 0xc0795e5a - 0xc09d5590 (2301 kB)
.text : 0xc0400000 - 0xc0795e5a (3671 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 1865.849 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3731.69
BogoMIPS (lpj=1865849)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 0 MCE banks
using mwait in idle threads.
Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20100121
ACPI: setting ELCR to 0200 (from 0e20)
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 19785 entries in 39 pages
Enabling APIC mode: Flat. Using 0 I/O APICs
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3731.69 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3264 bytes
devtmpfs: initialized
Time: 8:40:33 Date: 09/28/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc130, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and
report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000001fff0000 - 000000001fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7740k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1285663232.816:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 994
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:0d.0: version 3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ahci 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
ahci 0000:00:0d.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:0b.0: setting latency timer to 64
ehci_hcd 0000:00:0b.0: EHCI Host Controller
ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: irq 10, io mem 0xf0805000
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34.7-56.fc13.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34.7-56.fc13.i686 ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel(a)redhat.com
psmouse serio1: ID: 10 00 64
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (7957 buckets, 31828 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 10:103:676
rtc_cmos rtc_cmos: setting system clock to 2010-09-28 08:40:34 UTC (1285663234)
Initalizing network drop monitor service
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
ata1: SATA link down (SStatus 0 SControl 300)
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 548k freed
Write protecting the kernel text: 3672k
Write protecting the kernel read-only data: 1756k
usb 2-1: new full speed USB device using ohci_hcd and address 2
dracut: dracut-005-4.fc13
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: root was live:/dev/disk/by-label/Fedora13Live-20100928, liveroot is now
live:CDLABEL=Fedora13Live-20100928
udev: starting version 153
usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1: Manufacturer: VirtualBox
input: VirtualBox USB Tablet as
/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input4
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB
Tablet] on usb-0000:00:06.0-1/input0
hrtimer: interrupt took 5128481 ns
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/live-rw
dracut: Switching root
readahead: starting
udev: starting version 153
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
e1000 0000:00:03.0: setting latency timer to 64
e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:b5:2a:78
microcode: CPU0 sig=0x6f2, pf=0x1, revision=0x0
microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, Peter
Oruba
parport_pc 00:04: reported by Plug and Play ACPI
ppdev: user-space parallel port driver
microcode: CPU0 update to revision 0x5a failed
microcode: CPU0 update to revision 0x5a failed
microcode: CPU0 update to revision 0x5a failed
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use
force_addr=0xaddr
Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:05.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 92075 usecs (11525 samples)
intel8x0: measured clock 125169 rejected
intel8x0_measure_ac97_clock: measured 53213 usecs (11290 samples)
intel8x0: measured clock 212166 rejected
intel8x0_measure_ac97_clock: measured 50904 usecs (11419 samples)
intel8x0: measured clock 224324 rejected
intel8x0: clocking to 48000
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
eth0: no IPv6 routers present
fuse init (API version 7.13)
4958
days inactive
4961
days old
livecd@lists.fedoraproject.org
11 comments
3 participants
participants (3)
-
Alan Pevec -
Bruno Wolff III -
Johan Vromans