test September 2003

test@lists.fedoraproject.org

313 participants
468 discussions

To less options in redhat-config-packages
by Georg E Schneider 27 Sep '03

27 Sep '03

Sometimes I download packages in a own destination so I want to say redhat-config-packages my destination to install the packages. But it seems not to work. The option tree says it's not valid. And isodir is wrong. So I miss a option to install packages from a own destination. (redhat-config-packages-1.9.1-1 Fedora Core release 0.94 (Severn)) ps: For everyone I've seen today there's a G Schneider in this channel too, but don't cofound me with him :) -- 1024D/2CF44148 2003-06-29 Georg E Schneider <georg(a)georgs.org> Key fingerprint = 4F44 9A46 2238 6CFA D271 D09C 235F EFB0 2CF4 4148

1 0

problems with e1000 network and sound
by Martin 27 Sep '03

27 Sep '03

I have an asus motherboard p4c800-e, with 1G ethernet(intel 82547ei) and 3Ghz Hyperthreaded P4 and 875p mch chipset. I net installed(not upgraded) severn 2 with anaconda without any trouble. then on first reboot, am unable to get sound or networking up. which is interesting since I did a net install. from dmesg i see: NETDEV WATCHDOG eth0: transmit timed out e1000: eth0 NIC link is Up 100 Mbps Full Duplex didn't see any other error messages. i've tried disabling hyperthreading in bios. also tried booting with 'noacpi' and 'acpi=off'. also sound doesn't work. Severn 1 worked fine with this system. appreciate any help. marty

5 7

NFS Install Fail
by Matt Whiteley 27 Sep '03

27 Sep '03

I get a failure in the NFS install after entering the server address and path. I have a blank blue screen for a minute maybe and then it tells me signal 11, unmounting disks, disabling swap ... safe to reboot. I have checked the iso files. I am using a Win2k NFS server Omni from Xlink, but I have used it in the past without problems. I enter 192.168.1.102 [w2kbox] /pub/fedora/ Then a pause and the error. In severn1 I can mount the directory and view the contents (the three iso files). I was trying to save some cdrs but maybe I will just burn them. -- Matt Whiteley <matt-whiteley(a)comcast.net>

1 0

Fedora2 up2date fails at livna.org load
by Christopher A. Williams 27 Sep '03

27 Sep '03

My up2date program just stops when trying to fetch updates from the stire rpm/http://rpm.livna.org//base/pkglist.redhat/9.0/i386.bz2. The progress log shows complete and the background window moves ahead to the "Skipped Packages" window, but the progress dialog stays there with a 100% indication and up2date itself just stops. I can kill the progress menu and hit "Back" or "Cancel" to get out of this, but I can't go forward. If I disable all non-Redhat sites in the channels list before trying, everything works just fine. Ideas on how to fix this? Cheers, Chris -- ==================================== "If you get to thinkin' you're a person of some influence, try orderin' someone else's dog around." --Cowboy Wisdom

1 0

More 0.94 issues
by Andre Robatino 26 Sep '03

26 Sep '03

First, I downloaded the ISOs, checked the md5 sums against the MD5SUM file, and checked the signature of the MD5SUM file itself. Then, after burning the CDs, I checked the md5 sums on the CDs themselves with the dd command. Everything was fine. Then, after bringing the CDs home and running the mediacheck, the first CD failed, the second passed, and the third failed. So I downloaded the ISOs at home, and burned new copies at home, after checking the ISO md5 sums again. Upon doing the mediacheck, the exact same CDs failed. I decided to gamble that the problem was in the mediacheck program, rather than the CDs themselves. I did an upgrade from beta1 to beta2, and though the system was basically functional, I noticed some error messages on startup and shutdown, so I decided to do a clean install. Both the upgrade and the clean install proceeded without errors, reinforcing my suspicion that there was something wrong with the mediacheck program. I use DSL with PPPoE. I configured the network connection to come up at boot time, but this doesn't happen. I can bring it up manually with redhat-config-network, however. Even though the ethernet interface is activated after the PPP connection comes up, and ifconfig confirms this, it's still shown as inactive in the GUI. I'm not sure what the proper configuration for the ethernet interface is, I previously had an IP-less configuration where the ethernet interface comes up in response to PPPoE. Name service didn't work. I noticed that /etc/ppp/resolv.conf had been automatically filled with two DNS server addresses, but /etc/resolv.conf hadn't. I took the two DNS addresses and manually entered them into redhat-config-network under the DNS tab, and then these addresses made their way into /etc/resolv.conf, so name service works. The copying should happen automatically, however. I'm not familiar with the software responsible for the above problems. Which packages are likely to be responsible so I can file bug reports? P.S. The metacity bug #104373 still manifests (same version metacity-2.5.3-3 as before).

3 3

redhat-config-packages doesn't accept the Fedora Core 0.94 discs on package install
by Cameron Newton 26 Sep '03

26 Sep '03

it seems to just ask for the disc over and over again... i have tested this on two PCs... any ideas?

2 1

To 2.6 kernel users: patched modutils.spec with included modprobe.conf.5
by Michel Alexandre Salim 26 Sep '03

26 Sep '03

Dear all, After trying in vain to read the manpage for modprobe.conf online, I thought I'd just add it to Red Hat's modutils RPM for the benefit of all those testing Arjan's 2.6 kernels or just vanilla kernels... https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=105760 The patch itself could be found here: http://salimma.freeshell.org/files/SPECS/modutils.spec.diff Enjoy :) - Michel

1 0

(no subject)
by Peer Dicken 26 Sep '03

26 Sep '03

Hello fedora-test-list, I'd like to install fedora rc2. I have got an MSI K72NG Mainboard with an integrated SATA-Raid controller (promise fasttrack S150tx2plus chipset). I know there are drivers from promise.com - these drivers work perfectly with RH9, but not with fedora. Please, anyone who has installed fedora on a comparable system, give me some help. Thanks! -- Best regards, Peer mailto:p.dicken@web.de

1 1

KDE 3.1.4 maybe ?
by Botoaca Andrei 26 Sep '03

26 Sep '03

I won't be a b*tch about it ... but is there any date know for KDE 3.1.4 including in severn ? (Because I saw that SuSE has updates for it already ...). I saw it was out for a while, and no KDE 3.1.4 in Severn2 ... although i hoped so ... Thanks Me _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

4 3

Re: samba 3.0?
by Glen Maeding 26 Sep '03

26 Sep '03

On Thu, 2003-09-25 at 09:04, Christopher A. Williams wrote: > > Samba 3.0.0-5rc1 is already in there if you updated everything from > the > redhat-beta-updates channel on RHN. But isn't that release candidate 1 as spelled out '5rc1' at the end of the version line? If you go to this link: http://us1.samba.org/samba/ftp/Binary_Packages/RedHat/RPMS/i386/9.0/ You will see that its not versioned as above or even use the 'rc' in it. But then I do not know if Redhat interwine it in a specific way to their distros. -- -------------------------------------------------------------------- * -- Glen Maeding * -- MIS Tech @ Kidspeace Inc. * -- Webmaster of MIS-comm, Pdangel.org, and others... * -- E-mail: gmaeding(a)kidspeace.org * -- Pager e-mail: goik(a)tmail.com **Note: There's a Critical Security Upgrade available for Microsoft Windows; It's called "Linux" --------------------------------------------------------------------

3 2

← Newer
1
...
9
10
11
12
13
14
15
...
47
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test September 2003