test February 2006

test@lists.fedoraproject.org

309 participants
543 discussions

raise new windows (is it worse again?)
by Neal Becker 23 Feb '06

23 Feb '06

I noticed that today, newly created windows are not generally raised. This is very annoying. This behavior has happened before with earlier FC5 tests, but seemed to be (somewhat) better until a couple of days ago. Now it seems that new windows are usually not raised. I'm using kde if that matters.

2 2

automounts not timing out
by Neal Becker 23 Feb '06

23 Feb '06

I just noticed today that something that was automounted via /net is not timing out. I am not (intentionally) accessing it. Something broken?

1 0

Announcing Fedora Core 5 Test 3
by Jesse Keating 23 Feb '06

23 Feb '06

Forty-four years ago, John Hershel Glenn Jr. is successfully launched into space aboard the Friendship 7 spacecraft on the first orbital flight by an American astronaut. Russia had already sent two cosmonauts into orbit at this time. In the many following years Russian and America race each other for space superiority. Much later Russia and America have finally started cooperating in Earth's adventures into space. Competition is good, but collaboration can by so much better. Today, Open Source stands as one of the ultimate examples of collaboration. No boundaries, no borders, no barriers. As an example of this collaboration, we are proud to announce: Fedora Core 5 Test 3 Now Available ================================== The Fedora Project announces the third release of the Fedora Core 5 development cycle, available for the i386, x86_64, and PPC/PPC64 architectures. Beware that Test releases are recommended only for Linux experts/enthusiasts or for technology evaluation, as many parts are likely to be broken and the rate of change is rapid. http://fedora.redhat.com/About/schedule/ Final is scheduled for release March 15. This aggressive schedule makes vitally important your help in testing, reporting and suggesting fixes for bugs. Please direct bugs to http://bugzilla.redhat.com, Product Fedora Core, Version fc5test3. As always, be sure that your bug is not already fixed by updates and search for existing bugs before filing. http://fedoraproject.org/wiki/Core/ReleaseFreezeProcess/ During the continual freeze process, very few changes will be introduced. This is to prevent new bugs from surfacing and to ensure that Fedora Core 5 is the best release we can make it. Rawhide reports over the next three weeks should be very sparse. Please do test the few updates extensively. Thanks to all in the Fedora Project who have contributed to this release. Your continued efforts are what makes Fedora possible. Downloads ========= DVD, CD and network installation are available. Please read the Important Warnings below in this announcement for more details. http://torrent.fedoraproject.org/ The recommended method of download is via BitTorrent from this site. http://fedora.redhat.com/download/mirrors.html HTTP, FTP, and RSYNC downloads are available from Fedora Project mirrors listed above. Note that not all mirrors may be synced at this time. Notable Features of FC5 Test 3 ============================== * Xen, now with x86_64! * Package selection within the installer has been reenabled. * Rebuilt again on later gcc4.1 snapshot for performance and security * Hibernate should be functional on a wide variety of hardware again (use pm-hibernate to test) * PPC Install CDs are bootable once again * Unified SRPM set instead of one per arch * Lots of bugfixes from Test 2 release testing * 1600+ Extras packages conveniently available via yum http://fedora.redhat.com/docs/release-notes/ Latest version of release notes are available from here. (not yet uploaded, will be soon. Important Warnings ================== http://fedoraproject.org/wiki/FC5Test3CommonProblems Please see this page for an updated list of important notes for FC5test3 in order to avoid common problems and troubleshoot problems that you may see. Have fun testing this release, and enjoy the collaboration of Linux. -- Jesse Keating Release Engineer: Fedora

5 6

Building mono apps with current rawhide on x86_64
by Paul F. Johnson 23 Feb '06

23 Feb '06

Hi, I'm trying to build gtksourceview-sharp on my x86_64 box. The archive dearchives and the build starts fine. Then stops dead after compiling the first line of code. This seems to happen when I try to do *anything* with the x86_64 version of mono. Is anyone else seeing this? TTFN Paul P.S. The packages I currently have waiting for review (ikvm, mysql-connector-sharp, monodoc, gtksourceview-sharp and monodevelop) all build happily under x86 -- "Logic, my dear Zoe, is merely the ability to be wrong with authority" - Dr Who

2 3

closing older bug reports without looking = bad practice ?
by Marius Andreiana 23 Feb '06

23 Feb '06

Hi all, I've got a bunch of notices with FC5 test1 and test2 bugs being closed as there have been a lot of updates meanwhile. For me, as a tester which monitors some of the bugs and find some time once in a weekend to do some triage, this seemed plain rude. If there are too many bugs overwhelming developers then the cause should be addressed (better code with fewer bugs, which means more resources devoted to coding which are unavailable now) or find alternative solutions, where fedora testers could help. Closing all the reported bugs won't make them go away, but will make testers go away. With the current bugzilla setup, the number of reported bugs would have decreased as more testers do triage and see if they are still valid in rawhide, or they could confirm it until a developer finally looks at it, or the reporter might update it with new info. A practice from openoffice bugzilla could be borrowed - bugs reported by usual bugzilla acounts are by default UNCONFIRMED, and only fedora testers can set them to NEW. If there are too many bugs, a developer could ignore UNCONFIRMED ones. I also noticed Dave closes kernel bugs with each kernel release, asking people to retest. While this might save developers time, it could also leave real bugs closed as reporter might get tired of re-confirming a bug for 3 times. Take for example this bug: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=174968 In FC5test1, looks like the bttv driver had some problems, causing tvtuners to stop working. A few updates later, it worked again. The causes for not working and working again are unknown, therefore it could happen on every new release. Just cross fingers and hope for the best! To conclude, please don't close bug reports without researching them first. If Red Hat staff doesn't have time for it, please ask for triage help on fedora-test list, even with weekly themes, such as GNOME triage week (including searching for upstream bugs), kernel week etc - just post the link to the bugzilla query for all the required components. Thanks and looking forward for a better FC5 release! -- Marius Andreiana

8 11

FC5t3: Install with Nvidia Geforce 7600GT problem
by Adam Gibson 23 Feb '06

23 Feb '06

When the actual install screen comes up I just get a corrupted display. I can just make out what is there and sometimes can see the welcome screen with a button to start/continue the installation. The mouse/cursor works. I can move the cursor anywhere I want but clicking on the messed up looking button does nothing. I noticed that when starting up Fedora, it mentions found Nvidia unknown device 0092 . I assume it is defaulting to the VESA driver which seems to have some kind of problem with the 7600GT(even though vesa worked under FC4 for the 7600GT before manually changing it to nv). If it is defaulting to VESA is there a way to force FC5t3 to use the nv driver instead? It would be interesting to see if the nv driver works. What does it take to get device 0092 added to the approved nvidia device list so that it is detected properly to use the nv driver? I am using the x86_64 DVD install btw for an AMD 4000+.

3 4

FC5T3 hang at 'Starting udev'
by Bill Soudan 23 Feb '06

23 Feb '06

Hi all, Trying to install FC5T3 on my Vaio SZ140 (very newish laptop from Sony). The install went fine, but upon reboot, the machine hangs a few seconds after the 'Starting udev' message. I'm currently scouring the internet but meanwhile, I figured it might be helpful to ask here as well. I assume it's something related to PCMCIA. I had also attempted to install FC4, but FC4 would hang at the 'Starting PCMCIA' prompt. To actually boot the machine, I used interactive startup and answered no to the 'Start pcmcia?' prompt. FC4 however didn't include a driver for the laptop's ethernet port, while FC5T3 does. I can get to a shell prompt at least in FC5T3 by mashing CTRL-C as soon as init starts. Thoughts or suggestions? I've attached the output of lspci and lspci -v -v -v. Thanks, Bill 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 01d8 (rev a1) 06:00.0 Network controller: Intel Corporation Unknown device 4222 (rev 02) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 15) 09:04.0 CardBus bridge: Texas Instruments Unknown device 8039 09:04.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a 09:04.2 Mass storage controller: Texas Instruments Unknown device 803b 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 1, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Interrupt: pin A routed to IRQ 10 Region 0: Memory at de400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d6000000-d7ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d1f00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 2, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: de100000-de1fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 3, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d8000000-d9ffffff Prefetchable memory behind bridge: 00000000d2000000-00000000d3f00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 4, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: da000000-dbffffff Prefetchable memory behind bridge: 00000000d4000000-00000000d5f00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 5, PowerLimit 6.500000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 1800 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 1820 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 4: I/O ports at 1840 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 1860 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 0: Memory at de404000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=09, subordinate=0a, sec-latency=56 I/O behind bridge: 00005000-00005fff Memory behind bridge: de000000-de0fffff Prefetchable memory behind bridge: 0000000060000000-0000000061f00000 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at 1880 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at 18c8 [size=8] Region 1: I/O ports at 18ac [size=4] Region 2: I/O ports at 18c0 [size=8] Region 3: I/O ports at 18a8 [size=4] Region 4: I/O ports at 18b0 [size=16] Region 5: Memory at de404400 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 4: I/O ports at 18e0 [size=32] 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 01d8 (rev a1) (prog-if 00 [VGA]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Interrupt: pin A routed to IRQ 5 Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at dc000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <256ns, L1 <4us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <256ns, L1 <4us Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting 06:00.0 Network controller: Intel Corporation Unknown device 4222 (rev 02) Subsystem: Intel Corporation Unknown device 1050 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Interrupt: pin A routed to IRQ 10 Region 0: Memory at de100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <128ns, L1 <64us Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number c9-de-04-ff-ff-02-13-00 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 15) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 10 Interrupt: pin A routed to IRQ 18 Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 3000 [size=256] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 0 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [100] Advanced Error Reporting 09:04.0 CardBus bridge: Texas Instruments Unknown device 8039 Subsystem: Sony Corporation Unknown device 81e6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size 20 Interrupt: pin A routed to IRQ 20 Region 0: Memory at de006000 (32-bit, non-prefetchable) [size=4K] Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=176 Memory window 0: 60000000-61fff000 (prefetchable) Memory window 1: 62000000-63fff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 09:04.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a (prog-if 10 [OHCI]) Subsystem: Sony Corporation Unknown device 81e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 1000ns max), Cache Line Size 10 Interrupt: pin B routed to IRQ 10 Region 0: Memory at de005000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 09:04.2 Mass storage controller: Texas Instruments Unknown device 803b Subsystem: Sony Corporation Unknown device 81e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 57 (1750ns min, 1000ns max), Cache Line Size 10 Interrupt: pin C routed to IRQ 10 Region 0: Memory at de004000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

3 3

A thought - new testing bugs posted here...
by Orion Poplawski 23 Feb '06

23 Feb '06

Perhaps we could get *new* bugs filed for fc#test# posted to this list?

2 2

Asterisk funnies.
by Steven Haigh 23 Feb '06

23 Feb '06

After todays updates, I'm trying to start asterisk via the init script, I get: /etc/init.d/asterisk start Starting asterisk: /bin/bash: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory [FAILED] Telling it to restart also makes me wonder... ]# /etc/init.d/asterisk restart Shutting down asterisk: pidof: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory pidof: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory Starting asterisk: /bin/bash: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory [FAILED] Running ldconfig -v shows the libraries are there, and accounted for: # ldconfig -v /lib: libsepol.so.1 -> libsepol.so.1 librt.so.1 -> librt-2.3.90.so libdevmapper.so.1.02 -> libdevmapper.so.1.02 libiw.so.28 -> libiw.so.28 libanl.so.1 -> libanl-2.3.90.so libdl.so.2 -> libdl-2.3.90.so libacl.so.1 -> libacl.so.1.1.0 libpam.so.0 -> libpam.so.0.81.2 libutil.so.1 -> libutil-2.3.90.so libpam_misc.so.0 -> libpam_misc.so.0.81.2 libblkid.so.1 -> libblkid.so.1.0 libsemanage.so.1 -> libsemanage.so.1 libthread_db.so.1 -> libthread_db-1.0.so libasound.so.2 -> libasound.so.2.0.0 libproc-3.2.6.so -> libproc-3.2.6.so libnss_hesiod.so.2 -> libnss_hesiod-2.3.90.so libcidn.so.1 -> libcidn-2.3.90.so libexpat.so.0 -> libexpat.so.0.5.0 libcrypt.so.1 -> libcrypt-2.3.90.so ld-linux.so.2 -> ld-2.3.90.so libcrypto.so.6 -> libcrypto.so.0.9.8a libattr.so.1 -> libattr.so.1.1.0 libpcre.so.0 -> libpcre.so.0.0.1 libdb-4.3.so -> libdb-4.3.so libpthread.so.0 -> libpthread-2.3.90.so libgcc_s.so.1 -> libgcc_s-4.1.0-20060210.so.1 libresolv.so.2 -> libresolv-2.3.90.so libnss_compat.so.2 -> libnss_compat-2.3.90.so libSegFault.so -> libSegFault.so libnsl.so.1 -> libnsl-2.3.90.so libssl.so.6 -> libssl.so.0.9.8a libext2fs.so.2 -> libext2fs.so.2.4 libaudit.so.0 -> libaudit.so.0.0.0 libuuid.so.1 -> libuuid.so.1.2 libpamc.so.0 -> libpamc.so.0.81.0 libtermcap.so.2 -> libtermcap.so.2.0.8 libcom_err.so.2 -> libcom_err.so.2.1 libnss_dns.so.2 -> libnss_dns-2.3.90.so libcap.so.1 -> libcap.so.1.10 libBrokenLocale.so.1 -> libBrokenLocale-2.3.90.so libss.so.2 -> libss.so.2.0 libe2p.so.2 -> libe2p.so.2.3 libc.so.6 -> libc-2.3.90.so libnss_nisplus.so.2 -> libnss_nisplus-2.3.90.so libnss_files.so.2 -> libnss_files-2.3.90.so libsetrans.so.0 -> libsetrans.so.0 libdevmapper-event.so.1.02 -> libdevmapper-event.so.1.02 libdbus-1.so.2 -> libdbus-1.so.2.0.0 libselinux.so.1 -> libselinux.so.1 libnss_nis.so.2 -> libnss_nis-2.3.90.so libm.so.6 -> libm-2.3.90.so libnss_db.so.2 -> libnss_db-2.2.so /usr/lib: libdb_cxx-4.3.so -> libdb_cxx-4.3.so libgssrpc.so.4 -> libgssrpc.so.4.0 libsvn_wc-1.so.0 -> libsvn_wc-1.so.0.0.0 libkrb4.so.2 -> libkrb4.so.2.0 libsvn_fs_fs-1.so.0 -> libsvn_fs_fs-1.so.0.0.0 libhesiod.so.0 -> libhesiod.so.0 libwvutils.so.4.2 -> libwvutils.so.4.2 libvorbis.so.0 -> libvorbis.so.0.3.1 libk5crypto.so.3 -> libk5crypto.so.3.0 libkrb5.so.3 -> libkrb5.so.3.2 libatk-1.0.so.0 -> libatk-1.0.so.0.1112.0 libgdbm.so.2 -> libgdbm.so.2.0.0 libstunnel.so -> libstunnel.so libXp.so.6 -> libXp.so.6.2.0 libpcreposix.so.0 -> libpcreposix.so.0.0.0 libjpeg.so.62 -> libjpeg.so.62.0.0 libsasl2.so.2 -> libsasl2.so.2.0.21 libdw.so.1 -> libdw-0.119.so libXpm.so.4 -> libXpm.so.4.11.0 libXau.so.6 -> libXau.so.6.0.0 libICE.so.6 -> libICE.so.6.3.0 libgssapi_krb5.so.2 -> libgssapi_krb5.so.2.2 libopcodes-2.16.91.0.5.so -> libopcodes-2.16.91.0.5.so libapr-1.so.0 -> libapr-1.so.0.2.2 libparted-1.6.so.14 -> libparted.so libhistory.so.5 -> libhistory.so.5.0 libogg.so.0 -> libogg.so.0.5.3 libvorbisfile.so.3 -> libvorbisfile.so.3.1.1 libbeecrypt.so.6 -> libbeecrypt.so.6.4.0 libaspell.so.15 -> libaspell.so.15.1.3 libform.so.5 -> libform.so.5.5 libpcap.so.0.9.4 -> libpcap.so.0.9.4 libsensors.so.3 -> libsensors.so.3.0.9 libtcl8.4.so -> libtcl8.4.so libwiretap.so.0 -> libwiretap.so.0.0.1 libnetsnmpagent.so.10 -> libnetsnmpagent.so.10.0.0 libgomp.so.1 -> libgomp.so.1.0.0 libsvn_delta-1.so.0 -> libsvn_delta-1.so.0.0.0 libgthread-2.0.so.0 -> libgthread-2.0.so.0.902.4 libart_lgpl_2.so.2 -> libart_lgpl_2.so.2.3.17 libwvbase.so.4.2 -> libwvbase.so.4.2 liblftp-jobs.so.0 -> liblftp-jobs.so.0.0.0 libsvn_ra_dav-1.so.0 -> libsvn_ra_dav-1.so.0.0.0 libnuma.so.1 -> libnuma.so.1 libkrb5support.so.0 -> libkrb5support.so.0.0 libz.so.1 -> libz.so.1.2.3 libslang.so.2 -> libslang.so.2.0.5 libapol.so.1 -> libapol.so.2.2.0 libgcrypt.so.11 -> libgcrypt.so.11.2.1 libdistcache.so.1 -> libdistcache.so.1.0.1 libpcrecpp.so.0 -> libpcrecpp.so.0.0.0 libXmuu.so.1 -> libXmuu.so.1.0.0 libseaudit.so.1 -> libseaudit.so.1.2.6 libpgtypes.so.2 -> libpgtypes.so.2.1 libuser.so.1 -> libuser.so.1.1.4 libelf.so.1 -> libelf-0.119.so librpmio-4.4.so -> librpmio-4.4.so libmenu.so.5 -> libmenu.so.5.5 libecpg_compat.so.2 -> libecpg_compat.so.2.1 libnetsnmp.so.10 -> libnetsnmp.so.10.0.0 libsvn_swig_py-1.so.0 -> libsvn_swig_py-1.so.0.0.0 libsvn_client-1.so.0 -> libsvn_client-1.so.0.0.0 libldap-2.3.so.0 -> libldap-2.3.so.0.2.7 libXmu.so.6 -> libXmu.so.6.2.0 librpmdb-4.4.so -> librpmdb-4.4.so libnfsidmap.so.0 -> libnfsidmap.so.0.1.0 libgmpxx.so.3 -> libgmpxx.so.3.0.5 libgettextsrc-0.14.5.so -> libgettextsrc.so libecpg.so.5 -> libecpg.so.5.1 libXaw.so.6 -> libXaw6.so.6.0.1 libmagic.so.1 -> libmagic.so.1.0.0 libpanel.so.5 -> libpanel.so.5.5 libpython2.4.so.1.0 -> libpython2.4.so.1.0 libgnutls.so.12 -> libgnutls.so.12.3.6 libbz2.so.1 -> libbz2.so.1.0.3 libpspell.so.15 -> libpspell.so.15.1.3 libldap_r-2.3.so.0 -> libldap_r-2.3.so.0.2.7 libkadm5clnt.so.5 -> libkadm5clnt.so.5.1 libuniconf.so.4.2 -> libuniconf.so.4.2 libsvn_ra_svn-1.so.0 -> libsvn_ra_svn-1.so.0.0.0 libformw.so.5 -> libformw.so.5.5 libgnutls-extra.so.12 -> libgnutls-extra.so.12.3.6 libX11.so.6 -> libX11.so.6.2.0 libkdb5.so.4 -> libkdb5.so.4.0 libXt.so.6 -> libXt.so.6.0.0 libsvn_diff-1.so.0 -> libsvn_diff-1.so.0.0.0 libhal-storage.so.1 -> libhal-storage.so.1.0.0 libpopt.so.0 -> libpopt.so.0.0.0 libgmp.so.3 -> libgmp.so.3.3.3 libmenuw.so.5 -> libmenuw.so.5.5 libsvn_repos-1.so.0 -> libsvn_repos-1.so.0.0.0 libidn.so.11 -> libidn.so.11.5.16 libxml2.so.2 -> libxml2.so.2.6.23 libncurses.so.5 -> libncurses.so.5.5 libstdc++.so.6 -> libstdc++.so.6.0.7 libbluetooth.so.1 -> libbluetooth.so.1.0.22 libsvn_fs_base-1.so.0 -> libsvn_fs_base-1.so.0.0.0 libnal.so.1 -> libnal.so.1.0.1 libsefs.so.1 -> libsefs.so.1.2.1 libsvn_ra-1.so.0 -> libsvn_ra-1.so.0.0.0 libglib-2.0.so.0 -> libglib-2.0.so.0.902.4 libsvn_fs-1.so.0 -> libsvn_fs-1.so.0.0.0 libneon.so.25 -> libneon.so.25.0.5 libvorbisenc.so.2 -> libvorbisenc.so.2.0.2 libsnmp.so.10 -> libsnmp.so.10.0.0 libXext.so.6 -> libXext.so.6.4.0 libnetsnmpmibs.so.10 -> libnetsnmpmibs.so.10.0.0 libcurl.so.3 -> libcurl.so.3.0.0 librpcsecgss.so.1 -> librpcsecgss.so.1.0.0 libdbus-glib-1.so.2 -> libdbus-glib-1.so.2.0.0 libgnutls-openssl.so.12 -> libgnutls-openssl.so.12.3.6 libnetsnmphelpers.so.10 -> libnetsnmphelpers.so.10.0.0 librpm-4.4.so -> librpm-4.4.so libsqlite3.so.0 -> libsqlite3.so.0.8.6 libXaw.so.7 -> libXaw7.so.7.0.0 libtonezone.so.1.0 -> libtonezone.so.1.0 libcrack.so.2 -> libcrack.so.2.8.0 libsvn_swig_ruby-1.so.0 -> libsvn_swig_ruby-1.so.0.0.0 libutempter.so.0 -> libutempter.so.0.5.5 libnetsnmptrapd.so.10 -> libnetsnmptrapd.so.10.0.0 libkadm5srv.so.5 -> libkadm5srv.so.5.1 libgobject-2.0.so.0 -> libgobject-2.0.so.0.902.4 libbfd-2.16.91.0.5.so -> libbfd-2.16.91.0.5.so libhal.so.1 -> libhal.so.1.0.0 libusb-0.1.so.4 -> libusb.so libwrap.so.0 -> libwrap.so.0.7.6 libdistcacheserver.so.1 -> libdistcacheserver.so.1.0.1 liblockdev.so.1 -> liblockdev.so.1.0.1 librpmbuild-4.4.so -> librpmbuild-4.4.so libgpg-error.so.0 -> libgpg-error.so.0.1.4 libwvstreams.so.4.2 -> libwvstreams.so.4.2 libgettextlib-0.14.5.so -> libgettextlib.so libevent-1.1a.so.1 -> libevent-1.1a.so.1.0.2 libpng12.so.0 -> libpng12.so.0.1.2.8 libreadline.so.5 -> libreadline.so.5.0 libpanelw.so.5 -> libpanelw.so.5.5 libXdmcp.so.6 -> libXdmcp.so.6.0.0 libgmodule-2.0.so.0 -> libgmodule-2.0.so.0.902.4 libpq.so.4 -> libpq.so.4.1 libwvtelephony.so.4.2 -> libwvtelephony.so.4.2 liblber-2.3.so.0 -> liblber-2.3.so.0.2.7 libaprutil-1.so.0 -> libaprutil-1.so.0.2.2 libethereal.so.0 -> libethereal.so.0.0.1 libsvn_subr-1.so.0 -> libsvn_subr-1.so.0.0.0 libgssapi.so.1 -> libgssapi.so.1.0.0 libusbpp-0.1.so.4 -> libusbpp.so liblftp-tasks.so.0 -> liblftp-tasks.so.0.0.0 libSM.so.6 -> libSM.so.6.0.0 libnewt.so.0.52 -> libnewt.so.0.52.1 libdes425.so.3 -> libdes425.so.3.0 libmp.so.3 -> libmp.so.3.1.7 libncursesw.so.5 -> libncursesw.so.5.5 libsvn_ra_local-1.so.0 -> libsvn_ra_local-1.so.0.0.0 /lib/tls: (hwcap: 0x8000000000000000) /usr/lib/sse2: (hwcap: 0x0000000004000000) libgmpxx.so.3 -> libgmpxx.so.3.0.5 libgmp.so.3 -> libgmp.so.3.3.3 libmp.so.3 -> libmp.so.3.1.7 /usr/lib/tls: (hwcap: 0x8000000000000000) /lib/tls/i586: (hwcap: 0x8004000000000000) /lib/tls/i686: (hwcap: 0x8008000000000000) /lib/tls/i486: (hwcap: 0x8002000000000000) /usr/lib/tls/i586: (hwcap: 0x8004000000000000) /usr/lib/tls/i686: (hwcap: 0x8008000000000000) /usr/lib/tls/i486: (hwcap: 0x8002000000000000) Anyone have any ideas on why it says that the libraries can't be found, yet they are there? -- Steven Haigh Email: netwiz(a)crc.id.au Web: http://www.crc.id.au Phone: (03) 9017 0597 - 0412 935 897 Sendmail is like emacs: A nice operating system, but missing an editor and a MTA.

4 16

Proprietary nvidia driver + 7800 GT PCI express
by Darrell Esau 23 Feb '06

23 Feb '06

Hello all, Using the 1975 smp kernel on FC5T3 with the proprietary nvidia driver (installed using the instructions here: https://www.redhat.com/archives/fedora-test-list/2006-February/msg00726.html ) The nvidia module compiles and installs fine, however when X starts, it runs for a bit, then the screen becomes garbled. A few seconds later the machine locks up. Has anyone else seen this? -d

4 3

← Newer
1
...
13
14
15
16
17
18
19
...
55
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test February 2006