hi,
I wish I was able to break all of this down, as I don't understand much of it. Hope someone here may add some comment.
On a HP-Compac 6715b, I got the included errors. It would only recognize text mode during install ( text mode install has errors that hasn't been corrected since ? FC5 ? ) and I had to download propritary driver from ATI. Several applications fails ( could seem like a timer error ? )
Anyway, I include the /var/log/dmesg files for 2 Fedora8
What can I do ?
//ARNE
=============================================================================
Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:18:33 EDT 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable) BIOS-e820: 0000000077fb0000 - 0000000077fc8000 (reserved) BIOS-e820: 0000000077fc8000 - 0000000077fe7fb8 (ACPI NVS) BIOS-e820: 0000000077fe7fb8 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491440) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FE0B0, 0024 (r2 HP ) ACPI: XSDT 77FC81B8, 005C (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 77FC8084, 00F4 (r4 HP 0944 3 HP 1) ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock": [00008800] [0000000000008100], using 64X [20070126] ACPI: DSDT 77FC8498, 11437 (r1 HP SB400 10000 MSFT 3000001) ACPI: FACS 77FE7D80, 0040 ACPI: SLIC 77FC8214, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: EPTH 77FC838C, 0038 (r1 HP 0944 1 HP 1) ACPI: APIC 77FC83C4, 0062 (r1 HP 0944 1 HP 1) ACPI: MCFG 77FC8428, 003C (r1 HP 0944 1 HP 1) ACPI: TCPA 77FC8464, 0032 (r2 HP 0944 1 HP 1) ACPI: SSDT 77FD98CF, 0206 (r1 HP PSSTBLID 1 HP 1) Scanning NUMA topology in Northbridge 24 CPU has 2 num_cores No NUMA configuration found Faking a node at 0000000000000000-0000000077fb0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491440) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000077fb0000 No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 491440 On node 0 totalpages: 491343 DMA zone: 56 pages used for memmap DMA zone: 1313 pages reserved DMA zone: 2630 pages, LIFO batch:0 DMA32 zone: 6662 pages used for memmap DMA32 zone: 480682 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 41688 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 483312 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1994.880 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ 0 size 32 MB No AGP bridge found Memory: 1929128k/1965760k available (2441k kernel code, 36244k reserved, 1378k data, 324k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3996.91 BogoMIPS (lpj=1998457) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ..MP-BIOS bug: 8254 timer not connected to IO-APIC Disabling APIC timer SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.43 BogoMIPS (lpj=1994716) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2064 bytes Time: 10:02:27 Date: 01/18/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [C08B] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C08B.C0FC._PRT] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. ACPI: Power Resource [C171] (off) ACPI: Power Resource [C230] (off) ACPI: Power Resource [C24C] (on) ACPI: Power Resource [C395] (off) ACPI: Power Resource [C396] (off) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:14.2 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0xffffffff could not be reserved pnp: 00:0a: ioport range 0x40b-0x40b has been reserved pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:0c: ioport range 0x8000-0x802f has been reserved pnp: 00:0c: ioport range 0x8100-0x811f has been reserved pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved pnp: 00:0d: iomem range 0xcd400-0xcffff has been reserved pnp: 00:0d: iomem range 0xd2a00-0xd2fff has been reserved pnp: 00:0d: iomem range 0x0-0x7ffffff could not be reserved pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 4000-4fff MEM window: d0400000-d05fffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: d0000000-d00fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: 2000-3fff MEM window: cc000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c8000000-c80fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 88000000-8bffffff MEM window: 90000000-93ffffff PCI: Bridge: 0000:00:14.4 IO window: 1000-1fff MEM window: d0100000-d03fffff PREFETCH window: 88000000-8bffffff PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 lapic is not functional. Could not switch to high resolution mode on CPU 1 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3835k freed audit: initializing netlink socket (disabled) audit(1200650546.804:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 2B02AABF702ECCF9 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. MSI deactivated. Boot video device is 0000:01:05.0 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Transitioning device [C399] to D3 ACPI: Transitioning device [C399] to D3 ACPI: Fan [C399] (off) ACPI: Transitioning device [C39A] to D3 ACPI: Transitioning device [C39A] to D3 ACPI: Fan [C39A] (off) ACPI: Transitioning device [C39B] to D3 ACPI: Transitioning device [C39B] to D3 ACPI: Fan [C39B] (off) ACPI: Transitioning device [C39C] to D3 ACPI: Transitioning device [C39C] to D3 ACPI: Fan [C39C] (off) ACPI: Processor [C000] (supports 8 throttling states) ACPI: Processor [C001] (supports 8 throttling states) ACPI: Thermal Zone [TZ1] (32 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 0 PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0xc Magic number: 8:341:22 Freeing unused kernel memory: 324k freed Write protecting the kernel read-only data: 1020k ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:12.0: version 2.3 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit usb 4-1: new full speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000ad2100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata2: SATA max UDMA/133 cmd 0xffffc20000ad2180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata3: SATA max UDMA/133 cmd 0xffffc20000ad2200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata4: SATA max UDMA/133 cmd 0xffffc20000ad2280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000015040 irq 14 ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000015048 irq 15 ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2 ata5.00: configured for MWDMA2 scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1200650557.312:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats security: 67 classes, 213052 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1200650557.817:3): policy loaded auid=4294967295 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 4:0:0:0: Attached scsi generic sg1 type 5 tg3.c:v3.81 (September 5, 2007) ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:10:00.0 to 64 ACPI: AC Adapter [C1EB] (off-line) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [C28D] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [C265] ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:4b:75:95:72 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: Video Bus as /class/input/input6 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) pnp: Device 00:02 activated. parport_pc 00:02: reported by Plug and Play ACPI pnp: Device 00:02 disabled. tpm_inf_pnp 00:03: Found C231 with ID IFX0102 tpm_inf_pnp 00:03: TPM found: config base 0x520, data base 0x530, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) SELinux: initialized (dev securityfs, type securityfs), not configured for labeling ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21 firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI version 1.10 ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 si3054: cannot initialize. EXT MID = 0000 firewire_core: created new fw device fw0 (0 config rom retries, S400) device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
==============================================================================
Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:36 EST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable) BIOS-e820: 0000000077fb0000 - 0000000077fc8000 (reserved) BIOS-e820: 0000000077fc8000 - 0000000077fe7fb8 (ACPI NVS) BIOS-e820: 0000000077fe7fb8 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491440) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FE0B0, 0024 (r2 HP ) ACPI: XSDT 77FC81B8, 005C (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 77FC8084, 00F4 (r4 HP 0944 3 HP 1) ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock": [00008800] [0000000000008100], using 64X [20070126] ACPI: DSDT 77FC8498, 11437 (r1 HP SB400 10000 MSFT 3000001) ACPI: FACS 77FE7D80, 0040 ACPI: SLIC 77FC8214, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: EPTH 77FC838C, 0038 (r1 HP 0944 1 HP 1) ACPI: APIC 77FC83C4, 0062 (r1 HP 0944 1 HP 1) ACPI: MCFG 77FC8428, 003C (r1 HP 0944 1 HP 1) ACPI: TCPA 77FC8464, 0032 (r2 HP 0944 1 HP 1) ACPI: SSDT 77FD98CF, 0206 (r1 HP PSSTBLID 1 HP 1) Scanning NUMA topology in Northbridge 24 CPU has 2 num_cores No NUMA configuration found Faking a node at 0000000000000000-0000000077fb0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491440) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000077fb0000 No mptable found. Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 491440 On node 0 totalpages: 491343 DMA zone: 56 pages used for memmap DMA zone: 1315 pages reserved DMA zone: 2628 pages, LIFO batch:0 DMA32 zone: 6662 pages used for memmap DMA32 zone: 480682 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 41688 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 483310 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1994.903 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ 0 size 32 MB No AGP bridge found Memory: 1929100k/1965760k available (2442k kernel code, 36272k reserved, 1381k data, 324k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3997.40 BogoMIPS (lpj=1998702) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ..MP-BIOS bug: 8254 timer not connected to IO-APIC Disabling APIC timer SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.44 BogoMIPS (lpj=1994722) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2080 bytes Time: 10:42:41 Date: 01/18/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [C08B] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [_SB_.C08B.C0FC._PRT] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. ACPI: Power Resource [C171] (off) ACPI: Power Resource [C230] (off) ACPI: Power Resource [C24C] (on) ACPI: Power Resource [C395] (off) ACPI: Power Resource [C396] (off) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:14.2 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0xffffffff could not be reserved pnp: 00:0a: ioport range 0x40b-0x40b has been reserved pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:0c: ioport range 0x8000-0x802f has been reserved pnp: 00:0c: ioport range 0x8100-0x811f has been reserved pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved pnp: 00:0d: iomem range 0xcd400-0xcffff has been reserved pnp: 00:0d: iomem range 0xd2a00-0xd2fff has been reserved pnp: 00:0d: iomem range 0x0-0x7ffffff could not be reserved pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 4000-4fff MEM window: d0400000-d05fffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: d0000000-d00fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: 2000-3fff MEM window: cc000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c8000000-c80fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 8c000000-8fffffff MEM window: 90000000-93ffffff PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: d0100000-d03fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. Clockevents: could not switch to one-shot mode: lapic is not functional. Clockevents: could not switch to one-shot mode:<4>Could not switch to high resolution mode on CPU 0 lapic is not functional. Could not switch to high resolution mode on CPU 1 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3854k freed audit: initializing netlink socket (disabled) audit(1200652960.789:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key EFFF415CECD83B98 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. MSI deactivated. Boot video device is 0000:01:05.0 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Transitioning device [C399] to D3 ACPI: Transitioning device [C399] to D3 ACPI: Fan [C399] (off) ACPI: Transitioning device [C39A] to D3 ACPI: Transitioning device [C39A] to D3 ACPI: Fan [C39A] (off) ACPI: Transitioning device [C39B] to D3 ACPI: Transitioning device [C39B] to D3 ACPI: Fan [C39B] (off) ACPI: Transitioning device [C39C] to D3 ACPI: Transitioning device [C39C] to D3 ACPI: Fan [C39C] (off) ACPI: Processor [C000] (supports 8 throttling states) ACPI: Processor [C001] (supports 8 throttling states) ACPI: Thermal Zone [TZ1] (49 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 0 PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0xc Magic number: 8:65:730 Freeing unused kernel memory: 324k freed Write protecting the kernel read-only data: 1020k ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:12.0: version 2.3 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit usb 4-1: new full speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000ad2100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata2: SATA max UDMA/133 cmd 0xffffc20000ad2180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata3: SATA max UDMA/133 cmd 0xffffc20000ad2200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata4: SATA max UDMA/133 cmd 0xffffc20000ad2280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000015040 irq 14 ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000015048 irq 15 ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2 ata5.00: configured for MWDMA2 scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1200652971.281:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats security: 67 classes, 213052 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1200652971.784:3): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) tg3.c:v3.81.1 (October 18, 2007) ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:10:00.0 to 64 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [C28D] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [C265] input: Video Bus as /class/input/input6 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: AC Adapter [C1EB] (off-line) eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:4b:75:95:72 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: PC Speaker as /class/input/input7 tpm_inf_pnp 00:03: Found C231 with ID IFX0102 tpm_inf_pnp 00:03: TPM found: config base 0x520, data base 0x530, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) SELinux: initialized (dev securityfs, type securityfs), not configured for labeling pnp: Device 00:02 activated. parport_pc 00:02: reported by Plug and Play ACPI pnp: Device 00:02 disabled. ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21 firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI version 1.10 ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 si3054: cannot initialize. EXT MID = 0000 firewire_core: created new fw device fw0 (0 config rom retries, S400) device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
--------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.