lyx/qt4: QWidget::repaint: Recursive repaint detected
by Sebastian Vahl
After yesterdays update for qt4 I'm getting this error when I try to start lyx
from a terminal:
[...]
QWidget::repaint: Recursive repaint detected
QWidget::repaint: Recursive repaint detected
QWidget::repaint: Recursive repaint detected
[...]
Lyx itself is not working and crashes after some time.
Because lyx is my only app for qt4 I'm not sure if this is a bug in qt4 or in
lyx. So I want to ask against which package I should fil a bug?
Sebastian
17 years, 1 month
Asus P5B Deluxe Wi-Fi AP motherboard - Is now the time to buy one ?
by richard mullens
I need to make a new webserver/router to connect to my two internet
connections (Cable and ASDL)
It occurs to me to use an Asus P5B Deluxe Wi-Fi AP motherboard
http://www.reghardware.co.uk/2006/09/13/review_asus_p5b_deluxe/
which has two gigabit NICs built in
plus an Intel Core 2 Duo E6300.
Does this make sense ?
I do want to run an *86_x64 *system.
Can I reasonably expect to run Fedora Core 7 on it ?
Should I use SATA or a parallel interface for the hard drive ?
I get the impression that if one runs a 64 bit system, one may need
twice as much memory (if all the datastructures are twice as wide).
Thanks for any comments
Richard
17 years, 1 month
ping kernel maintainer's: question of a bug status
by Ronald Warsow
hallo
it's about Bugzilla Bug 229968
reading and trying to understand what is mentioned under "upstream" from
https://bugzilla.redhat.com/bugzilla/page.cgi?id=fields.html#bug_status
i'm currently unsure what "fixed upstream" definitively means and need
some help.
if upstream in this case means ~one of the next kernels~ it should be
fixed right now, or am i wrong ? - up to now i pasted two kernels,
without luck, but i don't want to raise bureaucracy -
am i right in thinking of "kernel bug fixing" goes:
rawhide kernel -> bug -> redhat/fedora bz -> "fixed upstream" -> (one of
the) next rawhide kernel.
or do i miss a step in this line ?
another question: new kernel mailing list
i can imagine that it's also created to save some workload raised by the
need of "visual grep-ing" test -or -devel lists for kernel related issues.
so where to put my stuff if i test a kernel: kernel- or test-list ?
--
ronald
17 years, 1 month
FYI: getting vmware to work with kernel-2.6.20-1.3017
by Justin Albstmeijer
Have been using vmware (compiling modules) on fc7 without problems,
applying the vmware-any-any-update108.tar.gz fix, till now.
It stopped working with the release of kernel-2.6.20-1.3017.
Just found a way to get it working(compiling) again. (source
http://www.fedoraforum.de/viewtopic.php?p=57462).
Using:
VMware-server-1.0.2-39867.i386.rpm
vmware-any-any-update108.tar.gz
and changing line 318 in /usr/src/kernels/2.6.20-1.3017.fc7-i686/Makefile to:
-Wundef -Wno-unused-parameter -Wno-missing-field-initializers
Justin.
17 years, 1 month
yum and IPv6
by Dawid Gajownik
Hi!
Is something wrong with my machine or yum has problems with IPv6
connections?
[root@cyklop yum.repos.d]# LANG=C yum update
Loading "installonlyn" plugin
Setting up Update Process
Setting up repositories
ftp://ftp.ipv6.funet.fi/pub/mirrors/ftp.redhat.com/pub/fedora/linux/core/...:
[Errno 4] IOError: <urlopen error (-5, 'No address associated with
hostname')>
Trying other mirror.
Error: Cannot open/read repomd.xml file for repository: core
[root@cyklop yum.repos.d]# host ftp.ipv6.funet.fi
ftp.ipv6.funet.fi is an alias for nic.ipv6.funet.fi.
nic.ipv6.funet.fi has IPv6 address 2001:708:10:9::20:1
[root@cyklop yum.repos.d]# LANG=C wget
ftp://ftp.ipv6.funet.fi/pub/mirrors/ftp.redhat.com/pub/fedora/linux/core/...
--00:26:26--
ftp://ftp.ipv6.funet.fi/pub/mirrors/ftp.redhat.com/pub/fedora/linux/core/...
=> `repomd.xml'
Resolving ftp.ipv6.funet.fi... 2001:708:10:9::20:1
Connecting to ftp.ipv6.funet.fi|2001:708:10:9::20:1|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD
/pub/mirrors/ftp.redhat.com/pub/fedora/linux/core/6/i386/os/repodata ...
done.
==> SIZE repomd.xml ... 1140
==> EPSV ... done. ==> RETR repomd.xml ... done.
Length: 1140 (1.1K)
100%[======================================================================>]
1,140 --.-K/s in 0s
00:26:27 (36.1 MB/s) - `repomd.xml' saved [1140]
[root@cyklop yum.repos.d]#
Updated FC6, python-urlgrabber-2.9.9-2, yum-3.0.5-1.fc6 from
updates-testing.
I searched through bugzilla but I haven't found anything interesting.
Regards,
Dawid
--
^_*
17 years, 1 month
rawhide report: 20070326 changes
by Build System
Updated Packages:
(none)
Broken deps for s390
----------------------------------------------------------
systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
17 years, 1 month
Bittorrent/Azureus Segmentation fault
by Jim Bevier
I tried Bittorrent and Azureus today and they both abort. How do I figure
out what to fix to get one of them to work on FC7? Anybody else seeing
this? All rawhide updates are installed.
Jim
17 years, 1 month
Wireless (rt2500) problems with Rawhide
by Steven I Usdansky
I have not been able to bring up a wireless connection on my Averatec 3250
using the built-in wireless (rt2500) with any 2.6.20 kernel in Rawhide. The
rt2500pci module is loaded, but running ifup ra0 gives me the following
output in /var/log/messages:
Mar 25 06:54:26 hercynite dhclient: wmaster0: unknown hardware address type
801
Mar 25 06:54:26 hercynite dhclient: wmaster0: unknown hardware address type
801
Mar 25 06:54:26 hercynite dhclient: DHCPREQUEST on ra0 to 255.255.255.255 port
67
Mar 25 06:54:32 hercynite last message repeated 2 times
Mar 25 06:54:38 hercynite dhclient: DHCPDISCOVER on ra0 to 255.255.255.255
port 67 interval 6
Mar 25 06:54:44 hercynite dhclient: DHCPDISCOVER on ra0 to 255.255.255.255
port 67 interval 14
Mar 25 06:54:58 hercynite dhclient: DHCPDISCOVER on ra0 to 255.255.255.255
port 67 interval 9
Mar 25 06:55:07 hercynite dhclient: DHCPDISCOVER on ra0 to 255.255.255.255
port 67 interval 15
Mar 25 06:55:22 hercynite dhclient: DHCPDISCOVER on ra0 to 255.255.255.255
port 67 interval 16
Mar 25 06:55:38 hercynite dhclient: DHCPDISCOVER on ra0 to 255.255.255.255
port 67 interval 1
Mar 25 06:55:39 hercynite dhclient: No DHCPOFFERS received.
Mar 25 06:55:39 hercynite dhclient: Trying recorded lease 192.168.1.4
Mar 25 06:55:42 hercynite dhclient: Trying recorded lease 192.168.2.18
FWIW, the same procedure works fine in Ubuntu 7.04 beta. Bugzilla time, and if
so, which component?
--
It's not rocket science, it's rock science
____________________________________________________________________________________
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html
17 years, 1 month
Trying to identify a mono problem
by Paul F. Johnson
Hi,
First, really sorry about posting this between two different mailing
lists, but it's an important problem!
http://nodoid.homelinux.org/csharp/dl/ctrix.exe
This is a little game I did in less than an hour this morning, but it's
exhibiting an annoying problem - the keypress events aren't doing
anything.
I've tried it under Win32 and there isn't a problem. Under Mono 1.2.3
(Fedora Rawhide) the key press events do nothing. Can folks using either
1.1.18 (FC6) or on any other mono-supported platform confirm this
behaviour.
The source was compiled on my Linux box, has never smelt Win32 and is
free from nasties.
Keys : Z (left) X (right) K (rotate) M (drop) Esc (Quit)
TTFN
Paul
--
Sie können mich aufreizen und wirklich heiß machen!
17 years, 1 month
rawhide report: 20070325 changes
by Build System
Updated Packages:
ifd-egate-0.05-17
-----------------
* Fri Mar 23 2007 Jack Magne <jmagne(a)redhat.com> 0.05-17
- Change to udev rule to get token removals recognized Bug# 232983
Broken deps for s390
----------------------------------------------------------
systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
17 years, 1 month
