https://bugzilla.redhat.com/show_bug.cgi?id=291571My audio is not clear. It has some disturbances.
scsconfig.log.
------- System Config Soundcard Log -------- Sat Sep 15 15:32:47 IST 2007
------- lspci -------- 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 LE] (rev a2) 05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 05:03.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) 05:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) LAN Controller (rev 01)
------- lspci -vn -------- 00:00.0 0600: 8086:2770 (rev 02) Subsystem: 8086:544e Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:2771 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d0000000-d1ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Capabilities: [88] Subsystem: 8086:544e Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1b.0 0403: 8086:27d8 (rev 01) Subsystem: 8086:0202 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at d2100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: d2200000-d22fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 0000:0000 Capabilities: [a0] Power Management version 2
00:1c.2 0604: 8086:27d4 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: d2300000-d23fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 0000:0000 Capabilities: [a0] Power Management version 2
00:1c.3 0604: 8086:27d6 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: d2400000-d24fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 0000:0000 Capabilities: [a0] Power Management version 2
00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI]) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at 2080 [size=32]
00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI]) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 2060 [size=32]
00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI]) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 2040 [size=32]
00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI]) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at 2020 [size=32]
00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI]) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0, IRQ 20 Memory at d2104000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: d2000000-d20fffff Capabilities: [50] Subsystem: 8086:544e
00:1f.0 0601: 8086:27b8 (rev 01) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information
00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: 8086:544e Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 20b0 [size=16]
00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: 8086:544e Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 20c8 [size=8] I/O ports at 20e4 [size=4] I/O ports at 20c0 [size=8] I/O ports at 20e0 [size=4] I/O ports at 20a0 [size=16] Capabilities: [70] Power Management version 2
00:1f.3 0c05: 8086:27da (rev 01) Subsystem: 8086:544e Flags: medium devsel, IRQ 19 I/O ports at 2000 [size=32]
01:00.0 0300: 10de:0142 (rev a2) (prog-if 00 [VGA]) Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d1000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at <ignored> [disabled] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint IRQ 0
05:02.0 0200: 10ec:8139 (rev 10) Subsystem: 11f6:8139 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at 1000 [size=256] Memory at d2001400 (32-bit, non-prefetchable) [size=256] Expansion ROM at ffff0000 [disabled] [size=64K] Capabilities: [50] Power Management version 2
05:03.0 0480: 1131:7130 (rev 01) Subsystem: 5168:0138 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at d2001000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1
05:08.0 0200: 8086:27dc (rev 01) Subsystem: 8086:3086 Flags: bus master, medium devsel, latency 32, IRQ 21 Memory at d2000000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1100 [size=64] Capabilities: [dc] Power Management version 2
------- lsmod -------- Module Size Used by ppdev 10693 0 lp 14089 0 fuse 40165 0 autofs4 21341 2 nf_conntrack_ipv4 11845 2 ipt_REJECT 7617 2 iptable_filter 6465 1 ip_tables 14213 1 iptable_filter nf_conntrack_ipv6 19153 2 xt_state 6081 4 nf_conntrack 53641 3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state nfnetlink 8537 3 nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack xt_tcpudp 6977 8 ip6t_REJECT 8128 2 ip6table_filter 6337 1 ip6_tables 15109 1 ip6table_filter x_tables 14549 6 ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_REJECT,ip6_tables rfcomm 37993 0 l2cap 26449 3 rfcomm sunrpc 146109 1 ib_iser 31421 0 rdma_cm 26201 1 ib_iser ib_cm 30337 1 rdma_cm iw_cm 11341 1 rdma_cm ib_sa 20517 2 rdma_cm,ib_cm ib_mad 34345 2 ib_cm,ib_sa ib_core 45537 6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad ib_addr 9541 1 rdma_cm iscsi_tcp 22337 0 libiscsi 22737 2 ib_iser,iscsi_tcp scsi_transport_iscsi 28113 4 ib_iser,iscsi_tcp,libiscsi dm_mirror 22489 0 dm_multipath 18641 0 dm_mod 48424 2 dm_mirror,dm_multipath video 20305 0 output 7105 1 video sbs 20305 0 battery 14289 0 ac 8261 0 ipv6 249924 20 nf_conntrack_ipv6,ip6t_REJECT hci_usb 17293 0 bluetooth 50885 3 rfcomm,l2cap,hci_usb tuner 60265 0 snd_hda_intel 260029 4 snd_seq_dummy 6725 0 snd_seq_oss 30673 0 saa7134 117533 0 video_buf 22605 1 saa7134 snd_seq_midi_event 9929 1 snd_seq_oss compat_ioctl32 5313 1 saa7134 8139cp 22217 0 snd_seq 46361 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event ir_kbd_i2c 11217 1 saa7134 ir_common 33476 2 saa7134,ir_kbd_i2c snd_seq_device 10325 3 snd_seq_dummy,snd_seq_oss,snd_seq videodev 29537 1 saa7134 v4l2_common 18753 3 tuner,saa7134,videodev v4l1_compat 16197 2 saa7134,videodev 8139too 25041 0 parport_pc 27621 1 i2c_i801 12497 0 e100 34789 0 mii 8385 3 8139cp,8139too,e100 parport 33065 3 ppdev,lp,parport_pc rtc_cmos 10977 0 iTCO_wdt 14229 0 snd_pcm_oss 38625 0 i2c_core 22481 4 tuner,saa7134,ir_kbd_i2c,i2c_i801 iTCO_vendor_support 7109 1 iTCO_wdt snd_mixer_oss 16969 2 snd_pcm_oss snd_pcm 65517 2 snd_hda_intel,snd_pcm_oss snd_timer 20957 2 snd_seq,snd_pcm snd 45188 14 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer button 10577 0 soundcore 9761 2 snd snd_page_alloc 11209 2 snd_hda_intel,snd_pcm sr_mod 17765 0 cdrom 33633 1 sr_mod sg 32101 0 ata_piix 16837 1 ata_generic 9029 0 libata 100817 2 ata_piix,ata_generic sd_mod 27841 2 scsi_mod 122701 8 ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,sr_mod,sg,libata,sd_mod ext3 111473 1 jbd 53921 1 ext3 mbcache 10433 1 ext3 uhci_hcd 24025 0 ohci_hcd 21837 0 ehci_hcd 32085 0
------- /etc/modprobe.conf -------- alias eth0 e100 alias eth1 8139too alias scsi_hostadapter libata alias scsi_hostadapter1 ata_piix alias snd-card-0 snd-hda-intel options snd-card-0 index=0 options snd-hda-intel index=0
------- /etc/asound.conf --------
------- aplay -l -------- **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0
------- amixer -------- Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 95 [75%] [-24.00dB] [on] Front Right: Playback 95 [75%] [-24.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 127 [100%] [0.00dB] [off] Front Right: Playback 127 [100%] [0.00dB] [off] Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 127 Mono: Playback 127 [100%] [0.00dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 127 Mono: Playback 127 [100%] [0.00dB] [off] Simple mixer control 'Line In as Output',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic as Output',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 14 Front Left: Capture 7 [50%] [10.50dB] [on] Front Right: Capture 7 [50%] [10.50dB] [on] Simple mixer control 'Input Source',0 Capabilities: enum Items: 'Mic' 'Front Mic' 'Line' Item0: 'Mic' Simple mixer control 'Mux',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 2 Front Left: Capture 0 [0%] [0.00dB] Front Right: Capture 0 [0%] [0.00dB]
------- /proc/asound/version -------- Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
------- rpm -q alsa-lib -------- alsa-lib-1.0.14-3.fc8
------- rpm -q alsa-utils -------- alsa-utils-1.0.14-2.fc8
------- /proc/asound/modules -------- 0 snd_hda_intel
------- /proc/asound/pcm -------- 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2
------- /etc/sysconfig/hwconf -------- - class: OTHER bus: PCI detached: 0 driver: i2c-i801 desc: "Intel Corporation 82801G (ICH7 Family) SMBus Controller" vendorId: 8086 deviceId: 27da subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 3 - class: OTHER bus: PCI detached: 0 driver: iTCO_wdt desc: "Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge" vendorId: 8086 deviceId: 27b8 subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 0 - class: OTHER bus: PCI detached: 0 desc: "Intel Corporation 82801 PCI Bridge" vendorId: 8086 deviceId: 244e subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1e pcifn: 0 - class: OTHER bus: PCI detached: 0 desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 4" vendorId: 8086 deviceId: 27d6 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1c pcifn: 3 - class: OTHER bus: PCI detached: 0 desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 3" vendorId: 8086 deviceId: 27d4 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1c pcifn: 2 - class: OTHER bus: PCI detached: 0 desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 1" vendorId: 8086 deviceId: 27d0 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1c pcifn: 0 - class: OTHER bus: PCI detached: 0 desc: "Intel Corporation 82945G/GZ/P/PL PCI Express Root Port" vendorId: 8086 deviceId: 2771 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1 pcifn: 0 - class: OTHER bus: USB detached: 0 desc: "American Power Conversion Back-UPS ES 500 FW:850.m3.I USB FW:m3" usbclass: 3 usbsubclass: 0 usbprotocol: 0 usbbus: 2 usblevel: 1 usbport: 1 usbdev: 2 vendorId: 051d deviceId: 0002 usbmfr: American Power Conversion usbprod: Back-UPS ES 500 FW:850.m3.I USB FW:m3 - class: OTHER bus: USB detached: 0 driver: hci_usb desc: "ISSCBTA" usbclass: 224 usbsubclass: 1 usbprotocol: 1 usbbus: 5 usblevel: 1 usbport: 0 usbdev: 2 vendorId: 1131 deviceId: 1001 usbprod: ISSCBTA - class: OTHER bus: USB detached: 0 driver: hci_usb desc: "ISSCBTA" usbclass: 254 usbsubclass: 1 usbprotocol: 0 usbbus: 5 usblevel: 1 usbport: 0 usbdev: 2 vendorId: 1131 deviceId: 1001 usbprod: ISSCBTA - class: OTHER bus: PCI detached: 0 desc: "Intel Corporation 82945G/GZ/P/PL Memory Controller Hub" vendorId: 8086 deviceId: 2770 subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 0 pcifn: 0 - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23-0.181.rc6.git4.fc8 ehci_hcd EHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 1 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 ehci_hcd usbprod: EHCI Host Controller - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 2 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd usbprod: UHCI Host Controller - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 3 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd usbprod: UHCI Host Controller - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 4 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd usbprod: UHCI Host Controller - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd UHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 5 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23-0.181.rc6.git4.fc8 uhci_hcd usbprod: UHCI Host Controller - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0003" deviceId: PNP0003 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0200" deviceId: PNP0200 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0303" deviceId: PNP0303 compat: PNP030b - class: OTHER bus: ISAPNP detached: 0 driver: parport_pc desc: "PNP0401" deviceId: PNP0401 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0501" deviceId: PNP0501 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0800" deviceId: PNP0800 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0a03" deviceId: PNP0a03 - class: OTHER bus: ISAPNP detached: 0 driver: rtc-cmos desc: "PNP0b00" deviceId: PNP0b00 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0c02" deviceId: PNP0c02 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0c02" deviceId: PNP0c02 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0c04" deviceId: PNP0c04 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0f03" deviceId: PNP0f03 compat: PNP0f13 - class: OTHER bus: PSAUX detached: 0 desc: "Power Button (FF)" - class: OTHER bus: PSAUX detached: 0 desc: "Sleep Button (CM)" - class: OTHER bus: PSAUX detached: 0 desc: "saa7134 IR (LifeView/Typhoon Fl" - class: NETWORK bus: PCI detached: 0 device: eth0 driver: e100 desc: "Intel Corporation 82801G (ICH7 Family) LAN Controller" network.hwaddr: 00:16:76:8b:d3:08 vendorId: 8086 deviceId: 27dc subVendorId: 8086 subDeviceId: 3086 pciType: 1 pcidom: 0 pcibus: 5 pcidev: 8 pcifn: 0 - class: NETWORK bus: PCI detached: 0 device: eth1 driver: 8139too desc: "Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+" network.hwaddr: 00:80:48:37:0f:4a vendorId: 10ec deviceId: 8139 subVendorId: 11f6 subDeviceId: 8139 pciType: 1 pcidom: 0 pcibus: 5 pcidev: 2 pcifn: 0 - class: MOUSE bus: PSAUX detached: 0 device: input/mice driver: generic3ps/2 desc: "ImPS/2 Logitech Wheel Mouse" - class: MOUSE bus: PSAUX detached: 0 device: input/mice driver: generic3ps/2 desc: "Macintosh mouse button emulation" - class: AUDIO bus: PCI detached: 0 driver: snd-hda-intel desc: "Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller" vendorId: 8086 deviceId: 27d8 subVendorId: 8086 subDeviceId: 0202 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1b pcifn: 0 - class: CDROM bus: SCSI detached: 0 device: scd0 desc: "SONY DVD RW DRU-810A" host: 0 id: 0 channel: 0 lun: 0 - class: CDROM bus: SCSI detached: 0 device: scd1 desc: "SONY DVD RW DW-G120A" host: 0 id: 1 channel: 0 lun: 0 - class: VIDEO bus: PCI detached: 0 driver: nvidiafb desc: "nVidia Corporation NV43 [GeForce 6600 LE]" video.xdriver: nv vendorId: 10de deviceId: 0142 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 - class: HD bus: SCSI detached: 0 device: sda desc: "ATA ST380817AS" host: 2 id: 0 channel: 0 lun: 0 - class: HD bus: SCSI detached: 0 device: sdb desc: "ATA ST3160812AS" host: 2 id: 1 channel: 0 lun: 0 - class: HD bus: SCSI detached: 0 device: sdc desc: "ATA ST3200827AS" host: 3 id: 0 channel: 0 lun: 0 - class: CAPTURE bus: PCI detached: 0 driver: saa7134 desc: "Philips Semiconductors SAA7130 Video Broadcast Decoder" vendorId: 1131 deviceId: 7130 subVendorId: 5168 subDeviceId: 0138 pciType: 1 pcidom: 0 pcibus: 5 pcidev: 3 pcifn: 0 - class: KEYBOARD bus: PSAUX detached: 0 desc: "AT Translated Set 2 keyboard" - class: USB bus: PCI detached: 0 driver: ehci-hcd desc: "Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller" vendorId: 8086 deviceId: 27cc subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 7 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4" vendorId: 8086 deviceId: 27cb subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 3 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3" vendorId: 8086 deviceId: 27ca subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 2 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2" vendorId: 8086 deviceId: 27c9 subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 1 - class: USB bus: PCI detached: 0 driver: uhci-hcd desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1" vendorId: 8086 deviceId: 27c8 subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1d pcifn: 0 - class: IDE bus: PCI detached: 0 driver: ata_piix desc: "Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller" vendorId: 8086 deviceId: 27c0 subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 2 - class: IDE bus: PCI detached: 0 driver: ata_piix desc: "Intel Corporation 82801G (ICH7 Family) IDE Controller" vendorId: 8086 deviceId: 27df subVendorId: 8086 subDeviceId: 544e pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1f pcifn: 1
------- dmesg -------- Linux version 2.6.23-0.181.rc6.git4.fc8 (kojibuilder@) (gcc version 4.1.220070821 (Red Hat 4.1.2-23)) #1 SMP Thu Sep 13 18:52:33 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfe65000 (usable) BIOS-e820: 00000000bfe65000 - 00000000bfee8000 (ACPI NVS) BIOS-e820: 00000000bfee8000 - 00000000bfeec000 (usable) BIOS-e820: 00000000bfeec000 - 00000000bfeff000 (ACPI data) BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) 2175MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe680 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 786176) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 786176 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 786176 On node 0 totalpages: 786176 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 3080 pages used for memmap Normal zone: 222200 pages, LIFO batch:31 HighMem zone: 7612 pages used for memmap HighMem zone: 549188 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT BFEFDE48, 003C (r1 INTEL D945GNT FF9 MSFT 1000013) ACPI: FACP BFEFCF10, 0074 (r1 INTEL D945GNT FF9 MSFT 1000013) ACPI: DSDT BFEF7010, 4348 (r1 INTEL D945GNT FF9 MSFT 1000013) ACPI: FACS BFEE3C40, 0040 ACPI: APIC BFEFCE10, 0078 (r1 INTEL D945GNT FF9 MSFT 1000013) ACPI: WDDT BFEF6F90, 0040 (r1 INTEL D945GNT FF9 MSFT 1000013) ACPI: MCFG BFEF6F10, 003C (r1 INTEL D945GNT FF9 MSFT 1000013) ACPI: ASF! BFEFCD10, 00A6 (r32 INTEL D945GNT FF9 MSFT 1000013) ACPI: SSDT BFEF6E90, 002F (r1 INTEL SetupVar FF9 MSFT 1000013) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c0000000 (gap: bff00000:40100000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 775428 Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0811000 soft=c07f1000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3000.081 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1024 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3088304k/3144704k available (2269k kernel code, 54488k reserved, 1164k data, 568k init, 2226600k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0760000 - 0xc07ee000 ( 568 kB) .data : 0xc06377ff - 0xc075aa44 (1164 kB) .text : 0xc0400000 - 0xc06377ff (2269 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 6005.76 BogoMIPS (lpj=3002883) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e43d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. lockdep: not fixing up alternatives. ACPI: Core revision 20070126 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 lockdep: not fixing up alternatives. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0812000 soft=c07f2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5999.05 BogoMIPS (lpj=2999528) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 0000b180 0000e43d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 Total of 2 processors activated (12004.82 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=56 bytes sizeof(inode)=604 bytes sizeof(dentry)=160 bytes sizeof(ext3inode)=856 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=3360 bytes khelper used greatest stack depth: 3160 bytes left khelper used greatest stack depth: 3084 bytes left Booting paravirtualized kernel on bare hardware Time: 8:19:42 Date: 08/15/107 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3) ACPI: Using IOAPIC for interrupt routing khelper used greatest stack depth: 2980 bytes left ACPI: PCI Root Bridge [PCI0] (0000:00) Force enabled HPET at base address 0xfed00000 PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d0000000-d1ffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: d2200000-d22fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: d2300000-d23fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: d2400000-d24fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: d2000000-d20fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2903k freed khelper used greatest stack depth: 2956 bytes left apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1189844381.677:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 23DDDD67A13DBFBF - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Firmware left 0000:05:08.0 e100 interrupts enabled, disabling PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0798): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0798): AE_NOT_FOUND, Processor Device is not present [20070126] cpuidle: driver acpi_idle failed to attach to cpu 1 cpuidle: driver acpi_idle failed to attach to cpu 0 isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 isapnp: No Plug & Play device found Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 7:263:321 hash matches device tty46 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 568k freed Write protecting the kernel read-only data: 866k ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2104000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected insmod used greatest stack depth: 1876 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq 15 usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice ata1.00: ATAPI: SONY DVD RW DRU-810A, 1.0d, max UDMA/33 ata1.01: ATAPI: SONY DVD RW DW-G120A, MYR5, max UDMA/66 ata1.01: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 500 FW:850.m3.I USB FW:m3] on usb-0000:00:1d.0-2 ata1.01: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-810A 1.0d PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM SONY DVD RW DW-G120A MYR5 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120e6 bmdma 0x000120a0 irq 19 ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120e2 bmdma 0x000120a8 irq 19 usb 5-1: new full speed USB device using uhci_hcd and address 2 ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133 ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.01: ATA-7: ST3160812AS, 3.AAH, max UDMA/133 ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata3.01: configured for UDMA/133 ata4.00: ATA-7: ST3200827AS, 3.AAH, max UDMA/133 ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sd 2:0:0:0: [sda] Attached SCSI disk scsi 2:0:1:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:1:0: [sdb] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA ST3200827AS 3.AA PQ: 0 ANSI: 5 sd 3:0:0:0: [sdc] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 < sdc5 sdc6 > sd 3:0:0:0: [sdc] Attached SCSI disk insmod used greatest stack depth: 808 bytes left kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1189844388.325:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 5 users, 11 roles, 2244 types, 106 bools, 1 sens, 1024 cats security: 67 classes, 224474 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1189844388.937:3): policy loaded auid=4294967295 scsi 0:0:0:0: Attached scsi generic sg0 type 5 scsi 0:0:1:0: Attached scsi generic sg1 type 5 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:1:0: Attached scsi generic sg3 type 0 sd 3:0:0:0: Attached scsi generic sg4 type 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray sr 0:0:1:0: Attached scsi CD-ROM sr1 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 21 e100: eth0: e100_probe: addr 0xd2000000, irq 21, MAC addr 00:16:76:8B:D3:08 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18 eth1: RealTek RTL8139 at 0xf895e400, 00:80:48:37:0f:4a, IRQ 18 eth1: Identified 8139 chip type 'RTL-8100B/8139D' Linux video capture interface: v2.00 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) saa7130/34: v4l2 driver version 0.2.14 loaded ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19 saa7130[0]: found at 0000:05:03.0, rev: 1, irq: 19, latency: 32, mmio: 0xd2001000 saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected] saa7130[0]: board init: gpio is 1f900 saa7130[0]: there are different flyvideo cards with different tuners saa7130[0]: out there, you might have to use the tuner=<nr> insmod saa7130[0]: option to override the default value. input: saa7134 IR (LifeView/Typhoon Fl as /class/input/input5 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 1-0061: chip found @ 0xc2 (saa7130[0]) tuner 1-0061: type set to 37 (LG PAL (newer TAPC series)) tuner 1-0061: type set to 37 (LG PAL (newer TAPC series)) tuner 1-0063: chip found @ 0xc6 (saa7130[0]) saa7130[0]: registered device video0 [v4l2] saa7130[0]: registered device vbi0 saa7130[0]: registered device radio0 usb 5-1: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 floppy0: no floppy controllers found device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda6, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a tigran@aivazian.fsnet.co.uk Loading iSCSI transport class v2.0-724. iscsi: registered transport (tcp) iscsi: registered transport (iser) eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 audit(1189844410.874:4): audit_pid=2086 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ip6_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth1: no IPv6 routers present fuse init (API version 7.8) SELinux: initialized (dev sdc1, type fuseblk), uses genfs_contexts SELinux: initialized (dev sdc5, type fuseblk), uses genfs_contexts usb 5-1: USB disconnect, address 2 lp0: using parport0 (interrupt-driven). lp0: console ready ppdev: user-space parallel port driver ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev0: registered pardevice ppdev0: unregistered pardevice