It gets to "Starting Time server" and freezes.
New kernel = kernel-2.6.21-1.3116.fc7 (freezes)
Old Kernel = kernel-2.6.20-1.3104.fc7 (works)
On Sun, Apr 29, 2007 at 12:34:01AM -0500, Mike Chambers wrote:
It gets to "Starting Time server" and freezes.
New kernel = kernel-2.6.21-1.3116.fc7 (freezes)
Old Kernel = kernel-2.6.20-1.3104.fc7 (works)
What network card ?
Dave
On Sun, 2007-04-29 at 02:02 -0400, Dave Jones wrote:
On Sun, Apr 29, 2007 at 12:34:01AM -0500, Mike Chambers wrote:
It gets to "Starting Time server" and freezes.
New kernel = kernel-2.6.21-1.3116.fc7 (freezes)
Old Kernel = kernel-2.6.20-1.3104.fc7 (works)
What network card ?
SiS900 PCI Fast Ethernet (built into motherboard)
That seems to come up with no error messages. Here is my messages from the new kernel..
Apr 29 00:28:44 scrappy syslogd 1.4.2: restart. Apr 29 00:28:44 scrappy kernel: klogd 1.4.2, log source = /proc/kmsg started. Apr 29 00:28:44 scrappy kernel: BIOS-provided physical RAM map: Apr 29 00:28:44 scrappy kernel: sanitize start Apr 29 00:28:44 scrappy kernel: sanitize end Apr 29 00:28:44 scrappy kernel: copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 Apr 29 00:28:44 scrappy kernel: copy_e820_map() type is E820_RAM Apr 29 00:28:44 scrappy kernel: copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 Apr 29 00:28:44 scrappy kernel: copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 Apr 29 00:28:45 scrappy kernel: copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1 Apr 29 00:28:45 scrappy kernel: copy_e820_map() type is E820_RAM Apr 29 00:28:45 scrappy kernel: copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4 Apr 29 00:28:45 scrappy kernel: copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3 Apr 29 00:28:45 scrappy kernel: copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 Apr 29 00:28:45 scrappy kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Apr 29 00:28:45 scrappy kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Apr 29 00:28:45 scrappy rpcbind: cannot create socket for udp6 Apr 29 00:28:45 scrappy rpcbind: cannot create socket for tcp6 Apr 29 00:28:45 scrappy kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Apr 29 00:28:45 scrappy kernel: BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Apr 29 00:28:45 scrappy kernel: BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Apr 29 00:28:45 scrappy kernel: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Apr 29 00:28:45 scrappy kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Apr 29 00:28:45 scrappy kernel: 127MB HIGHMEM available. Apr 29 00:28:45 scrappy kernel: 896MB LOWMEM available. Apr 29 00:28:45 scrappy kernel: found SMP MP-table at 000f5250 Apr 29 00:28:45 scrappy kernel: Using x86 segment limits to approximate NX protection Apr 29 00:28:45 scrappy kernel: Zone PFN ranges: Apr 29 00:28:45 scrappy kernel: DMA 0 -> 4096 Apr 29 00:28:45 scrappy kernel: Normal 4096 -> 229376 Apr 29 00:28:45 scrappy kernel: HighMem 229376 -> 262128 Apr 29 00:28:45 scrappy kernel: early_node_map[1] active PFN ranges Apr 29 00:28:45 scrappy kernel: 0: 0 -> 262128 Apr 29 00:28:45 scrappy kernel: DMI 2.3 present. Apr 29 00:28:45 scrappy kernel: Using APIC driver default Apr 29 00:28:45 scrappy kernel: ACPI: RSDP 000F6CF0, 0014 (r0 AWARD ) Apr 29 00:28:45 scrappy kernel: ACPI: RSDT 3FFF3040, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0) Apr 29 00:28:45 scrappy kernel: ACPI: FACP 3FFF30C0, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0) Apr 29 00:28:45 scrappy kernel: ACPI: DSDT 3FFF3180, 3A65 (r1 AWARD AWRDACPI 1000 MSFT 100000E) Apr 29 00:28:45 scrappy kernel: ACPI: FACS 3FFF0000, 0040 Apr 29 00:28:45 scrappy kernel: ACPI: APIC 3FFF6C40, 0068 (r1 AWARD AWRDACPI 42302E31 AWRD 0) Apr 29 00:28:45 scrappy kernel: ACPI: PM-Timer IO Port: 0x1008 Apr 29 00:28:45 scrappy kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Apr 29 00:28:45 scrappy kernel: Processor #0 15:4 APIC version 20 Apr 29 00:28:45 scrappy kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) Apr 29 00:28:45 scrappy kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Apr 29 00:28:45 scrappy kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Apr 29 00:28:45 scrappy kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Apr 29 00:28:45 scrappy kernel: IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 Apr 29 00:28:45 scrappy kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Apr 29 00:28:45 scrappy kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) Apr 29 00:28:45 scrappy kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Apr 29 00:28:45 scrappy kernel: Using ACPI (MADT) for SMP configuration information Apr 29 00:28:45 scrappy kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Apr 29 00:28:45 scrappy kernel: Built 1 zonelists. Total pages: 258801 Apr 29 00:28:45 scrappy kernel: Kernel command line: ro root=LABEL=/1 rhgb quiet Apr 29 00:28:45 scrappy kernel: Enabling fast FPU save and restore... done. Apr 29 00:28:45 scrappy kernel: Enabling unmasked SIMD FPU exception support... done. Apr 29 00:28:45 scrappy kernel: Initializing CPU#0 Apr 29 00:28:45 scrappy kernel: CPU 0 irqstacks, hard=c079f000 soft=c077f000 Apr 29 00:28:45 scrappy kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Apr 29 00:28:45 scrappy kernel: Detected 2806.444 MHz processor. Apr 29 00:28:45 scrappy kernel: Console: colour VGA+ 80x25 Apr 29 00:28:45 scrappy kernel: Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar Apr 29 00:28:45 scrappy kernel: ... MAX_LOCKDEP_SUBCLASSES: 8 Apr 29 00:28:45 scrappy kernel: ... MAX_LOCK_DEPTH: 30 Apr 29 00:28:45 scrappy kernel: ... MAX_LOCKDEP_KEYS: 2048 Apr 29 00:28:45 scrappy kernel: ... CLASSHASH_SIZE: 1024 Apr 29 00:28:45 scrappy kernel: ... MAX_LOCKDEP_ENTRIES: 8192 Apr 29 00:28:45 scrappy kernel: ... MAX_LOCKDEP_CHAINS: 16384 Apr 29 00:28:45 scrappy kernel: ... CHAINHASH_SIZE: 8192 Apr 29 00:28:45 scrappy kernel: memory used by lock dependency info: 1096 kB Apr 29 00:28:45 scrappy kernel: per task-struct memory footprint: 1200 bytes Apr 29 00:28:45 scrappy kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Apr 29 00:28:45 scrappy kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Apr 29 00:28:45 scrappy kernel: Memory: 1024196k/1048512k available (2150k kernel code, 23532k reserved, 1140k data, 248k init, 131008k highmem) Apr 29 00:28:45 scrappy kernel: virtual kernel memory layout: Apr 29 00:28:45 scrappy kernel: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) Apr 29 00:28:45 scrappy kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB) Apr 29 00:28:45 scrappy kernel: vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) Apr 29 00:28:45 scrappy kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) Apr 29 00:28:45 scrappy kernel: .init : 0xc073c000 - 0xc077a000 ( 248 kB) Apr 29 00:28:45 scrappy kernel: .data : 0xc0619955 - 0xc0736cb4 (1140 kB) Apr 29 00:28:45 scrappy kernel: .text : 0xc0400000 - 0xc0619955 (2150 kB) Apr 29 00:28:45 scrappy kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Apr 29 00:28:45 scrappy kernel: Calibrating delay using timer specific routine.. 5622.64 BogoMIPS (lpj=2811321) Apr 29 00:28:45 scrappy kernel: Security Framework v1.0.0 initialized Apr 29 00:28:45 scrappy kernel: SELinux: Initializing. Apr 29 00:28:45 scrappy kernel: selinux_register_security: Registering secondary module capability Apr 29 00:28:45 scrappy kernel: Capability LSM initialized as secondary Apr 29 00:28:45 scrappy kernel: Mount-cache hash table entries: 512 Apr 29 00:28:45 scrappy kernel: monitor/mwait feature present. Apr 29 00:28:45 scrappy kernel: using mwait in idle threads. Apr 29 00:28:45 scrappy kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K Apr 29 00:28:45 scrappy kernel: CPU: L2 cache: 1024K Apr 29 00:28:45 scrappy kernel: CPU: Hyper-Threading is disabled Apr 29 00:28:45 scrappy kernel: Intel machine check architecture supported. Apr 29 00:28:45 scrappy kernel: Intel machine check reporting enabled on CPU#0. Apr 29 00:28:45 scrappy kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Apr 29 00:28:45 scrappy kernel: CPU0: Thermal monitoring enabled Apr 29 00:28:45 scrappy kernel: Checking 'hlt' instruction... OK. Apr 29 00:28:45 scrappy kernel: SMP alternatives: switching to UP code Apr 29 00:28:45 scrappy kernel: Freeing SMP alternatives: 12k freed Apr 29 00:28:45 scrappy kernel: ACPI: Core revision 20070126 Apr 29 00:28:45 scrappy kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01 Apr 29 00:28:45 scrappy kernel: CPU0: Temperature above threshold, cpu clock throttled (total events = 1) Apr 29 00:28:45 scrappy kernel: Total of 1 processors activated (5622.64 BogoMIPS). Apr 29 00:28:45 scrappy kernel: ENABLING IO-APIC IRQs Apr 29 00:28:45 scrappy kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Apr 29 00:28:45 scrappy kernel: Brought up 1 CPUs Apr 29 00:28:45 scrappy kernel: Time: 0:28:03 Date: 03/29/107 Apr 29 00:28:45 scrappy kernel: NET: Registered protocol family 16 Apr 29 00:28:45 scrappy kernel: ACPI: bus type pci registered Apr 29 00:28:45 scrappy kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbbf0, last bus=1 Apr 29 00:28:45 scrappy kernel: PCI: Using configuration type 1 Apr 29 00:28:45 scrappy kernel: Setting up standard PCI resources Apr 29 00:28:45 scrappy kernel: ACPI: Interpreter enabled Apr 29 00:28:45 scrappy kernel: ACPI: (supports S0 S1 S4 S5) Apr 29 00:28:45 scrappy kernel: ACPI: Using IOAPIC for interrupt routing Apr 29 00:28:45 scrappy kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Apr 29 00:28:45 scrappy kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Apr 29 00:28:45 scrappy kernel: pnp: PnP ACPI init Apr 29 00:28:45 scrappy kernel: pnp: PnP ACPI: found 10 devices Apr 29 00:28:45 scrappy kernel: usbcore: registered new interface driver usbfs Apr 29 00:28:45 scrappy kernel: usbcore: registered new interface driver hub Apr 29 00:28:45 scrappy kernel: usbcore: registered new device driver usb Apr 29 00:28:45 scrappy kernel: PCI: Using ACPI for IRQ routing Apr 29 00:28:45 scrappy kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Apr 29 00:28:45 scrappy kernel: NetLabel: Initializing Apr 29 00:28:45 scrappy kernel: NetLabel: domain hash size = 128 Apr 29 00:28:45 scrappy kernel: NetLabel: protocols = UNLABELED CIPSOv4 Apr 29 00:28:45 scrappy kernel: NetLabel: unlabeled traffic allowed by default Apr 29 00:28:45 scrappy kernel: pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved Apr 29 00:28:45 scrappy kernel: Time: tsc clocksource has been installed. Apr 29 00:28:45 scrappy kernel: pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved Apr 29 00:28:45 scrappy kernel: pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved Apr 29 00:28:45 scrappy kernel: pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved Apr 29 00:28:45 scrappy kernel: PCI: Bridge: 0000:00:01.0 Apr 29 00:28:45 scrappy kernel: IO window: d000-dfff Apr 29 00:28:45 scrappy kernel: MEM window: c0000000-dfffffff Apr 29 00:28:45 scrappy kernel: PREFETCH window: 50000000-500fffff Apr 29 00:28:45 scrappy kernel: NET: Registered protocol family 2 Apr 29 00:28:45 scrappy kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Apr 29 00:28:45 scrappy kernel: TCP established hash table entries: 65536 (order: 9, 2359296 bytes) Apr 29 00:28:45 scrappy kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) Apr 29 00:28:45 scrappy kernel: TCP: Hash tables configured (established 65536 bind 65536) Apr 29 00:28:45 scrappy kernel: TCP reno registered Apr 29 00:28:45 scrappy kernel: checking if image is initramfs... it is Apr 29 00:28:45 scrappy kernel: Switched to high resolution mode on CPU 0 Apr 29 00:28:45 scrappy kernel: Freeing initrd memory: 2796k freed Apr 29 00:28:45 scrappy kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Apr 29 00:28:45 scrappy kernel: apm: overridden by ACPI. Apr 29 00:28:45 scrappy kernel: audit: initializing netlink socket (disabled) Apr 29 00:28:45 scrappy kernel: audit(1177806483.909:1): initialized Apr 29 00:28:45 scrappy kernel: highmem bounce pool size: 64 pages Apr 29 00:28:45 scrappy kernel: Total HugeTLB memory allocated, 0 Apr 29 00:28:45 scrappy kernel: VFS: Disk quotas dquot_6.5.1 Apr 29 00:28:45 scrappy kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Apr 29 00:28:45 scrappy kernel: ksign: Installing public key data Apr 29 00:28:45 scrappy kernel: Loading keyring Apr 29 00:28:45 scrappy kernel: - Added public key DEDF55B35CB8C48C Apr 29 00:28:45 scrappy kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key) Apr 29 00:28:45 scrappy kernel: io scheduler noop registered Apr 29 00:28:45 scrappy kernel: io scheduler anticipatory registered Apr 29 00:28:45 scrappy kernel: io scheduler deadline registered Apr 29 00:28:45 scrappy kernel: io scheduler cfq registered (default) Apr 29 00:28:45 scrappy kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Apr 29 00:28:45 scrappy kernel: ACPI: Fan [FAN] (on) Apr 29 00:28:45 scrappy kernel: ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] Apr 29 00:28:45 scrappy kernel: ACPI: Thermal Zone [THRM] (91 C) Apr 29 00:28:45 scrappy kernel: isapnp: Scanning for PnP cards... Apr 29 00:28:45 scrappy kernel: isapnp: No Plug & Play device found Apr 29 00:28:45 scrappy kernel: Real Time Clock Driver v1.12ac Apr 29 00:28:45 scrappy kernel: Non-volatile memory driver v1.2 Apr 29 00:28:45 scrappy kernel: Linux agpgart interface v0.102 (c) Dave Jones Apr 29 00:28:45 scrappy kernel: agpgart: Detected SiS 661 chipset Apr 29 00:28:45 scrappy kernel: agpgart: AGP aperture is 128M @ 0xe0000000 Apr 29 00:28:45 scrappy kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Apr 29 00:28:45 scrappy kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 29 00:28:45 scrappy kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 29 00:28:45 scrappy kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Apr 29 00:28:45 scrappy kernel: input: Macintosh mouse button emulation as /class/input/input0 Apr 29 00:28:45 scrappy kernel: usbcore: registered new interface driver libusual Apr 29 00:28:45 scrappy kernel: usbcore: registered new interface driver hiddev Apr 29 00:28:45 scrappy kernel: usbcore: registered new interface driver usbhid Apr 29 00:28:45 scrappy kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver Apr 29 00:28:45 scrappy kernel: PNP: No PS/2 controller found. Probing ports directly. Apr 29 00:28:45 scrappy kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Apr 29 00:28:45 scrappy kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Apr 29 00:28:45 scrappy kernel: mice: PS/2 mouse device common for all mice Apr 29 00:28:45 scrappy kernel: TCP bic registered Apr 29 00:28:45 scrappy kernel: Initializing XFRM netlink socket Apr 29 00:28:45 scrappy kernel: NET: Registered protocol family 1 Apr 29 00:28:45 scrappy kernel: NET: Registered protocol family 17 Apr 29 00:28:45 scrappy kernel: Using IPI No-Shortcut mode Apr 29 00:28:45 scrappy kernel: Magic number: 3:90:457 Apr 29 00:28:45 scrappy kernel: Freeing unused kernel memory: 248k freed Apr 29 00:28:45 scrappy kernel: Write protecting the kernel read-only data: 846k Apr 29 00:28:45 scrappy kernel: USB Universal Host Controller Interface driver v3.0 Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16 Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.0: irq 16, io mem 0xe8033000 Apr 29 00:28:45 scrappy kernel: usb usb1: configuration #1 chosen from 1 choice Apr 29 00:28:45 scrappy kernel: hub 1-0:1.0: USB hub found Apr 29 00:28:45 scrappy kernel: hub 1-0:1.0: 3 ports detected Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17 Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.1: OHCI Host Controller Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.1: irq 17, io mem 0xe8034000 Apr 29 00:28:45 scrappy kernel: usb usb2: configuration #1 chosen from 1 choice Apr 29 00:28:45 scrappy kernel: hub 2-0:1.0: USB hub found Apr 29 00:28:45 scrappy kernel: hub 2-0:1.0: 3 ports detected Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18 Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.2: OHCI Host Controller Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 Apr 29 00:28:45 scrappy kernel: ohci_hcd 0000:00:03.2: irq 18, io mem 0xe8030000 Apr 29 00:28:45 scrappy kernel: usb usb3: configuration #1 chosen from 1 choice Apr 29 00:28:45 scrappy kernel: hub 3-0:1.0: USB hub found Apr 29 00:28:45 scrappy kernel: hub 3-0:1.0: 2 ports detected Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 Apr 29 00:28:45 scrappy kernel: ehci_hcd 0000:00:03.3: EHCI Host Controller Apr 29 00:28:45 scrappy kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 Apr 29 00:28:45 scrappy kernel: ehci_hcd 0000:00:03.3: irq 19, io mem 0xe8031000 Apr 29 00:28:45 scrappy kernel: ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Apr 29 00:28:45 scrappy kernel: usb usb4: configuration #1 chosen from 1 choice Apr 29 00:28:45 scrappy kernel: hub 4-0:1.0: USB hub found Apr 29 00:28:45 scrappy kernel: hub 4-0:1.0: 8 ports detected Apr 29 00:28:45 scrappy kernel: SCSI subsystem initialized Apr 29 00:28:45 scrappy kernel: ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 20 Apr 29 00:28:45 scrappy kernel: ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14 Apr 29 00:28:45 scrappy kernel: ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15 Apr 29 00:28:45 scrappy kernel: scsi0 : pata_sis Apr 29 00:28:45 scrappy kernel: ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 Apr 29 00:28:45 scrappy kernel: ata1.00: ATA-6: WDC WD400BB-00JHA0, 05.01C05, max UDMA/100 Apr 29 00:28:45 scrappy kernel: ata1.00: 78165360 sectors, multi 16: LBA Apr 29 00:28:45 scrappy kernel: ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 Apr 29 00:28:45 scrappy kernel: ata1.01: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100 Apr 29 00:28:45 scrappy kernel: ata1.01: 156301488 sectors, multi 16: LBA Apr 29 00:28:45 scrappy kernel: ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 Apr 29 00:28:45 scrappy kernel: ata1.00: configured for UDMA/100 Apr 29 00:28:45 scrappy kernel: ata1.01: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 Apr 29 00:28:46 scrappy kernel: ata1.01: configured for UDMA/100 Apr 29 00:28:46 scrappy kernel: scsi1 : pata_sis Apr 29 00:28:46 scrappy kernel: usb 2-3: new low speed USB device using ohci_hcd and address 3 Apr 29 00:28:46 scrappy kernel: usb 2-3: configuration #1 chosen from 1 choice Apr 29 00:28:46 scrappy kernel: input: Logitech USB Receiver as /class/input/input1 Apr 29 00:28:46 scrappy kernel: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:03.1-3 Apr 29 00:28:46 scrappy kernel: input: Logitech USB Receiver as /class/input/input2 Apr 29 00:28:46 scrappy kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:03.1-3 Apr 29 00:28:46 scrappy kernel: ata2.00: ATAPI, max UDMA/33 Apr 29 00:28:46 scrappy kernel: ata2.01: ATAPI, max UDMA/66 Apr 29 00:28:46 scrappy kernel: ata2.00: configured for UDMA/33 Apr 29 00:28:46 scrappy kernel: ata2.01: configured for UDMA/33 Apr 29 00:28:46 scrappy kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00JH 05.0 PQ: 0 ANSI: 5 Apr 29 00:28:46 scrappy kernel: SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) Apr 29 00:28:46 scrappy kernel: sda: Write Protect is off Apr 29 00:28:46 scrappy kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 29 00:28:46 scrappy kernel: SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) Apr 29 00:28:46 scrappy kernel: sda: Write Protect is off Apr 29 00:28:46 scrappy kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 29 00:28:46 scrappy kernel: sda: sda1 sda2 Apr 29 00:28:46 scrappy kernel: sd 0:0:0:0: Attached scsi disk sda Apr 29 00:28:46 scrappy kernel: scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5 Apr 29 00:28:46 scrappy kernel: SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) Apr 29 00:28:46 scrappy kernel: sdb: Write Protect is off Apr 29 00:28:46 scrappy kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 29 00:28:46 scrappy kernel: SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) Apr 29 00:28:46 scrappy kernel: sdb: Write Protect is off Apr 29 00:28:46 scrappy kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 29 00:28:46 scrappy kernel: sdb: sdb1 sdb2 sdb3 Apr 29 00:28:46 scrappy kernel: sd 0:0:1:0: Attached scsi disk sdb Apr 29 00:28:46 scrappy kernel: scsi 1:0:0:0: CD-ROM LITE-ON LTR-52327S QS58 PQ: 0 ANSI: 5 Apr 29 00:28:46 scrappy kernel: scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS09 PQ: 0 ANSI: 5 Apr 29 00:28:46 scrappy kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Apr 29 00:28:46 scrappy kernel: EXT3-fs: write access will be enabled during recovery. Apr 29 00:28:46 scrappy kernel: kjournald starting. Commit interval 5 seconds Apr 29 00:28:46 scrappy kernel: EXT3-fs: recovery complete. Apr 29 00:28:46 scrappy kernel: EXT3-fs: mounted filesystem with ordered data mode. Apr 29 00:28:46 scrappy kernel: SELinux: Disabled at runtime. Apr 29 00:28:46 scrappy kernel: audit(1177806492.908:2): selinux=0 auid=4294967295 Apr 29 00:28:46 scrappy kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 29 00:28:46 scrappy kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0 Apr 29 00:28:46 scrappy kernel: scsi 1:0:0:0: Attached scsi generic sg2 type 5 Apr 29 00:28:46 scrappy kernel: scsi 1:0:1:0: Attached scsi generic sg3 type 5 Apr 29 00:28:46 scrappy kernel: Floppy drive(s): fd0 is 1.44M Apr 29 00:28:46 scrappy kernel: FDC 0 is a post-1991 82077 Apr 29 00:28:46 scrappy kernel: sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray Apr 29 00:28:46 scrappy kernel: Uniform CD-ROM driver Revision: 3.20 Apr 29 00:28:46 scrappy kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Apr 29 00:28:46 scrappy kernel: input: PC Speaker as /class/input/input3 Apr 29 00:28:46 scrappy kernel: sis900.c: v1.08.10 Apr. 2 2006 Apr 29 00:28:46 scrappy kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21 Apr 29 00:28:46 scrappy kernel: 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. Apr 29 00:28:46 scrappy kernel: 0000:00:04.0: Using transceiver found at address 1 as default Apr 29 00:28:46 scrappy kernel: eth0: SiS 900 PCI Fast Ethernet at 0xe200, IRQ 21, 00:11:09:c0:aa:3a. Apr 29 00:28:46 scrappy kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 22 Apr 29 00:28:46 scrappy kernel: snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 Apr 29 00:28:46 scrappy kernel: ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23 Apr 29 00:28:46 scrappy kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 Apr 29 00:28:46 scrappy kernel: rtc_cmos: probe of 00:04 failed with error -16 Apr 29 00:28:46 scrappy kernel: intel8x0_measure_ac97_clock: measured 50864 usecs Apr 29 00:28:46 scrappy kernel: intel8x0: clocking to 48000 Apr 29 00:28:46 scrappy kernel: parport: PnPBIOS parport detected. Apr 29 00:28:46 scrappy kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] Apr 29 00:28:46 scrappy kernel: loop: loaded (max 8 devices) Apr 29 00:28:46 scrappy kernel: lp0: using parport0 (interrupt-driven). Apr 29 00:28:46 scrappy kernel: lp0: console ready Apr 29 00:28:46 scrappy kernel: sonypi: Sony Programmable I/O Controller Driver v1.26. Apr 29 00:28:46 scrappy kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Apr 29 00:28:46 scrappy kernel: No dock devices found. Apr 29 00:28:46 scrappy kernel: input: Power Button (FF) as /class/input/input4 Apr 29 00:28:46 scrappy xinetd[1617]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Apr 29 00:28:46 scrappy kernel: ACPI: Power Button (FF) [PWRF] Apr 29 00:28:46 scrappy xinetd[1617]: Started working: 1 available service Apr 29 00:28:46 scrappy kernel: input: Power Button (CM) as /class/input/input5 Apr 29 00:28:46 scrappy kernel: ACPI: Power Button (CM) [PWRB] Apr 29 00:28:46 scrappy kernel: ibm_acpi: ec object not found Apr 29 00:28:46 scrappy kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Apr 29 00:28:46 scrappy kernel: device-mapper: multipath: version 1.0.5 loaded Apr 29 00:28:46 scrappy kernel: EXT3 FS on sdb1, internal journal Apr 29 00:28:46 scrappy kernel: kjournald starting. Commit interval 5 seconds Apr 29 00:28:46 scrappy kernel: EXT3 FS on sdb2, internal journal Apr 29 00:28:46 scrappy kernel: EXT3-fs: mounted filesystem with ordered data mode. Apr 29 00:28:46 scrappy kernel: kjournald starting. Commit interval 5 seconds Apr 29 00:28:46 scrappy kernel: EXT3 FS on sda2, internal journal Apr 29 00:28:46 scrappy kernel: EXT3-fs: mounted filesystem with ordered data mode. Apr 29 00:28:46 scrappy kernel: Adding 1028152k swap on /dev/sdb3. Priority:-1 extents:1 across:1028152k Apr 29 00:28:46 scrappy kernel: eth0: Media Link On 100mbps full-duplex
My computer boots via rhgb to setting time/time server and freezes, so above is where it stops logging.
On Sun, 2007-04-29 at 07:37 -0500, Mike Chambers wrote:
On Sun, 2007-04-29 at 02:02 -0400, Dave Jones wrote:
On Sun, Apr 29, 2007 at 12:34:01AM -0500, Mike Chambers wrote:
It gets to "Starting Time server" and freezes.
New kernel = kernel-2.6.21-1.3116.fc7 (freezes)
Old Kernel = kernel-2.6.20-1.3104.fc7 (works)
What network card ?
SiS900 PCI Fast Ethernet (built into motherboard)
That seems to come up with no error messages. Here is my messages from the new kernel..
Apr 29 00:28:46 scrappy kernel: eth0: Media Link On 100mbps full-duplex
My computer boots via rhgb to setting time/time server and freezes, so above is where it stops logging.
Dave,
I have sense removed that kernel since it didn't boot, but wanted to follow up on if you knew of a problem or anything? I'll either file a bug, or wait until you put out a newer kernel version to see if it does the same thign and then report it?
Mike Chambers wrote:
On Sun, 2007-04-29 at 07:37 -0500, Mike Chambers wrote:
On Sun, 2007-04-29 at 02:02 -0400, Dave Jones wrote:
On Sun, Apr 29, 2007 at 12:34:01AM -0500, Mike Chambers wrote:
It gets to "Starting Time server" and freezes.
New kernel = kernel-2.6.21-1.3116.fc7 (freezes)
Old Kernel = kernel-2.6.20-1.3104.fc7 (works)
What network card ?
SiS900 PCI Fast Ethernet (built into motherboard)
That seems to come up with no error messages. Here is my messages from the new kernel..
Apr 29 00:28:46 scrappy kernel: eth0: Media Link On 100mbps full-duplex
My computer boots via rhgb to setting time/time server and freezes, so above is where it stops logging.
Dave,
I have sense removed that kernel since it didn't boot, but wanted to follow up on if you knew of a problem or anything? I'll either file a bug, or wait until you put out a newer kernel version to see if it does the same thign and then report it?
The sis900 driver had a bug that was patched April 20. Unfortunately, the patch introduced a regression that was then patched April 26 -- one day after 2.6.21 was released. The second patch appears to fix it, according to user reports in the below referenced thread.
Details: http://marc.info/?l=linux-netdev&m=117707735821802&w=2
Best, Jay
On Tue, 2007-05-01 at 09:21 -0500, Jay Cliburn wrote:
The sis900 driver had a bug that was patched April 20. Unfortunately, the patch introduced a regression that was then patched April 26 -- one day after 2.6.21 was released. The second patch appears to fix it, according to user reports in the below referenced thread.
Details: http://marc.info/?l=linux-netdev&m=117707735821802&w=2
Ok,so hopefully the next release by Dave will have the fix.
Thanks for the heads up (how did you figure out or find that problem?).
----- Original Message ----- From: "Jay Cliburn" jacliburn@bellsouth.net To: "For testers of Fedora Core development releases" fedora-test-list@redhat.com Sent: Tuesday, May 01, 2007 9:59 AM Subject: Re: Latest Rawhide kernel doesn't boot
Mike Chambers wrote:
Thanks for the heads up (how did you figure out or find that problem?).
I maintain a kernel network driver, and in that capacity I monitor kernel and netdev mailing list traffic. I remember seeing the sis900 thread.
Oh, Ok I see. Thanks for the heads up.
Mike
On Tue, May 01, 2007 at 09:30:40AM -0500, Mike Chambers wrote:
On Tue, 2007-05-01 at 09:21 -0500, Jay Cliburn wrote:
The sis900 driver had a bug that was patched April 20. Unfortunately, the patch introduced a regression that was then patched April 26 -- one day after 2.6.21 was released. The second patch appears to fix it, according to user reports in the below referenced thread.
Details: http://marc.info/?l=linux-netdev&m=117707735821802&w=2
Ok,so hopefully the next release by Dave will have the fix.
Fixed in CVS, will be in the next push to rawhide. (or grab it from my people.redhat.com page)
Dave
On Tue, 2007-05-01 at 12:56 -0400, Dave Jones wrote:
On Tue, May 01, 2007 at 09:30:40AM -0500, Mike Chambers wrote:
On Tue, 2007-05-01 at 09:21 -0500, Jay Cliburn wrote:
The sis900 driver had a bug that was patched April 20. Unfortunately, the patch introduced a regression that was then patched April 26 -- one day after 2.6.21 was released. The second patch appears to fix it, according to user reports in the below referenced thread.
Details: http://marc.info/?l=linux-netdev&m=117707735821802&w=2
Ok,so hopefully the next release by Dave will have the fix.
Fixed in CVS, will be in the next push to rawhide. (or grab it from my people.redhat.com page)
Your kernel worked like a champ, thanks for the follow up.
On Sunday 29 April 2007 6:34:01 am Mike Chambers wrote:
It gets to "Starting Time server" and freezes.
New kernel = kernel-2.6.21-1.3116.fc7 (freezes)
Old Kernel = kernel-2.6.20-1.3104.fc7 (works)
-- Mike Chambers Madisonville, KY
"Sex is like air, it's not important unless your not getting any!"
I have the same problem in a desktop. In this case the service where it freezes is gpm. When reading /var/log/messages there is no extra information.
The network card is a Silicon integrated System [SiS] SiS900 PCI Fast Ethernet (rev 90)
-
Dave Jones -
Jay Cliburn -
José Abílio Matos -
Mike Chambers -
Ronald Warsow