Problemas com ATI-Radeon 9600 tv-out
by Daniel rodrigues
pessoal, recorro mais uma vez a ajuda de vcs, o problema agora é o seguinte:
Uso o fedora 4 x86_64 kernnel 2.6.14-1.1644_FC4 e tenho uma placa vga da
ati, a radeon 9600 256mb: instalei o driver da ati e tudo funcionou numa
boa, rodo jogos, doom 3 inclusive, sem o menor problema, toco dvds etc, mas,
na ora de usar a função tv-out a tela começa a piscar, não posso fazer um
movimento no mouse ou apertar qualquer tecla que ela fica piscando. Depois
de alguns minutos nesse pisca pisca, recebo a mensagem: o x foi desligado
varias vezes nos ultimos minutos, ele será desativado durante dois minutos e
então tente iniciar novamente. aqui vai o meu xorg.conf para que os amigos
possam dar uma olhada e quiça pontar algum problema nele:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of
the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 790DF"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9600"
Option "VideoOverlay" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
bem, gente esse é o xorg default que o driver da ati criou pós instalação
via yum (yum install ati-fglrx kernel-module-fglrx-$(uname -r)) ele funciona
melhor do que o que foi criado quando, afim de fazer o tv-out funcionar de
qualquer maneira, usei o programa de configuração do driver (fgrlxconfig)
esse foi o outro xorg que foi criado (mas esse ultimo, além de não resolver
o problema, desconfigurou todo layout do KDE, e tornou impossível o
reconhecimento do monitor Samsung SyncMaster 793df):
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for
xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this
file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# === ATI device section ===
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
### EOF ###
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
Load "dbe" # Double buffer extension
Load "extmod"
# Option "omit xfree86-dga"
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xfree86"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Monitor"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync
+vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync
+vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync
+vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync
+vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync
+vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync
+vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync
+vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017
+hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085
+hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz,
H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062
-hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035
+hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044
+hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050
+hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059
+hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060
+hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069
+hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070
+hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075
+hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118
-hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126
+hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242
+hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253
+hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589
+hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589
+hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082
+hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434
+hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434
+hsync +vsync
Identifier "Monitor0"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4150
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code
for mtrr
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "TVFormat" "NTSC-M"
Option "TVStandard" "VIDEO"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "43"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "yes"
Option "FSAAScale" "6"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
Option "VideoOverlay" "on"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
Mode 0666
EndSection
Bem pessoal é isso ai, espero que isso ajude a vcs me ajudarem.
Daniel.
_________________________________________________________________
http://signup.alerts.msn.com/alerts/login.do?PINID=2430448&returnURL=http...
18 years, 4 months
Re: problemas com HD novo
by Daniel rodrigues
Consegui resolver o problema. Fiz o seguinte: no fstab coloquei a linha:
/dev/hdb1 /mnt/HDnovo ext3 defaults 0 0
depois as permições eu fiz manualmente no modo gráfico, pelo KDE. ficou
beleza e o problema acabou.
_________________________________________________________________
Você sabia que com o seu MSN Messenger você faz ligações de PC-papa- PC,
grátis e para qualquer lugar do mundo? É só acessar
http://imagine-msn.com/messenger/default2.aspx?locale=pt-br
18 years, 4 months
Kernel smp
by Paulo Flabiano Smorigo
Oi Pessoal...
Quando inicio o fedora, na tela do grub, aparece duas escolhas para a
mesma versão do kernel. Uma só com o número e outra com "smp" escrito
no fim. Como abaixo:
Fedora Core (2.6.14-1.1653_FC4smp)
Fedora Core (2.6.14-1.1653_FC4)
Pelo que eu achei na internet o "smp" server se a maquina tem mais de
um processador. A meu micro é um pentium 4. Por que ele instala essa
versão do kernel ja que a minha maquina não tem essa capacidade?
Falow...
18 years, 4 months
somente confirmação
by Cristiano Furtado
segue
--
Teledata Soluções integradas em Comunicação
Administrador de Sistemas Linux
Salvador - Bahia
18 years, 4 months
Fita DLT
by Adere - Levi / Analista de Suporte Linux
Pessoal estava olhando o log dos meu scripts, olha o que apareceu, a
fita estava na unidade belezinha, o que pode ser
/bin/tar: Removing leading `/' from member names
/bin/tar: /dev/st0: Wrote only 0 of 10240 bytes
/bin/tar: Error is not recoverable: exiting now
ai eu dei o seguinte comando abaixo, olha o que apareceu?
[root@frajola root]# mt -f /dev/st0 status
/dev/st0: No such device or address
--
Levi / Suporte Linux
ADERE Produtos Auto Adesivos Ltda
Estr.Municipal Valencio Calegari, 2002
Pq.Santo Antonio - Cep: 13181-905 - Sumaré / SP
CNPJ: 46.062.030/0001-23 - I.E.: 671.211.366.119
F.: (19) 2104-0700 - Sac: 0800 7012903
Visite nosso site: www.adere.com
.~.
/ v \ Seja Livre, use GNU/Linux!
/ ( ) \
^^-^^
18 years, 4 months
Adaptador USB wireless LG
by Duany Dreyton Bezerra Sousa
Olá amigos!
Possuo um adaptador wireless USB LG e não sei como
pô-lo para funcionar no Fedora.
Tenho um notebook e ele tem wireless da Broadcom, e
também não sei o procedimento correto para eu fazer
estes dois dispositivos funcionarem e se comunicarem.
Se alguém puder me ajudar eu agradeço.
SUPREMA INFORMÁTICA LTDA
Duany Dreyton Bezerra Sousa
Gerente Técnico
_______________________________________________________
Yahoo! doce lar. Faça do Yahoo! sua homepage.
http://br.yahoo.com/homepageset.html
18 years, 4 months
Espelhamento
by Adere - Levi / Analista de Suporte Linux
Pessoal tenho duas maquinas "A" e "B", com as seguintes configurações
Pentium IV 3.2Ghz, 4GB memorias DDR2, HD SATA 80GB, placa de rede 1GB
realtek, Placa mãe intel as duas são identicas, A maquina "A" ela é um
Terminal Server com 40 usuários pendurados nela, queria saber se tem
como, tudo o que o usuário fazer na máquina "A" faça igualzinho na
máquina "B", se o usuário baixar um email na máquina "A", vai baixar nas
duas máquinas "A" e "B", porque? Se no caso a máquina "A" ou "B" der
problema com o HD, Memória ou Placa Mãe o outro servidor assume, não sei
se fui bem claromas é isso, Obrigado
--
Levi / Suporte Linux
ADERE Produtos Auto Adesivos Ltda
Estr.Municipal Valencio Calegari, 2002
Pq.Santo Antonio - Cep: 13181-905 - Sumaré / SP
CNPJ: 46.062.030/0001-23 - I.E.: 671.211.366.119
F.: (19) 2104-0700 - Sac: 0800 7012903
Visite nosso site: www.adere.com
.~.
/ v \ Seja Livre, use GNU/Linux!
/ ( ) \
^^-^^
18 years, 4 months
Problemas com HD novo
by Daniel rodrigues
Direto ao assunto:
Comprei um hd novo e o coloquei como slave do meu antigo afim de manter o
antigo apenas para o sistema e o novo para baixar coisas da net, jogos,
filmes, etc. Procedi da seguinte forma:
usei o fdisk /dev/hdb
Opção n
Opção p (partição primária)
Opção 1
ele se tornou o hdb1
depois usei o comando mkfs.ext3 /dev/hdb1
criei um diretório /mnt/New_hd
e montei mount /dev/hdb1 /mnt/New_hd
Tudo certo... até ai.
Quando fui acrescentar a linha fstab para montagem automática durante a
inicialização começou me drama: Simplesmente o hd não é montado, recebo uma
mensagem de erro no durante a inicialização (muito rápida quase nem consigo
ler) algo como: wrong fs type or wrong superblock.
Mas se eu digito como root "mount /dev/hdb1 /mnt/New_hd" ele monta
normalmente!!!!!!!!!!!
Aqui vai meu fstab:
This file is edited by fstab-sync - see 'man fstab-sync' for details
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
/dev/devpts /dev/pts devpts gid=5,mode=620 0 0
/dev/shm /dev/shm tmpfs defaults 0 0
/dev/proc /proc proc defaults 0 0
/dev/sys /sys sysfs defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
/dev/hdb1 /mnt/New_hd ext2
defaults,user,exec,umask=0000 0 0
/dev/hdc /media/cdrecorder auto
pamconsole,exec,noauto,managed 0 0
Nota: já tentei, toda essa operação com .ext3, e obtive o mesmo resultado.
qualquer ajuda sera bem vinda
Daniel
_________________________________________________________________
http://imaginemsn.com/messenger/default2.aspx?locale=pt-br
18 years, 4 months
samba com lixeira
by Adere - Levi / Analista de Suporte Linux
pessoal estou configurando o samba com lixeira, e o compartilhamento
esta desse jeito abaixo:
[suporte]
comment = Diretorio Pessoal SUPORTE
path = /users/pessoal/suporte
browseable = yes
writable = yes
admin users = suporte
se eu adicionar a seguinte linha no meu compartilhamento "vfs object =
/usr/lib/samba/vfs/recycle.so
"
ele da a seguinte mensagem de erro abaixo, lembrando que qq alteração no
smb.conf, eu dou um restart no samba:
24905: tree connect failed: ERRDOS - ERRnosuchshare (You specified an
invalid share name)
SMB connection failed
O que pode ser? Alguém pode me ajudar? Obrigado
--
Levi / Suporte Linux
ADERE Produtos Auto Adesivos Ltda
Estr.Municipal Valencio Calegari, 2002
Pq.Santo Antonio - Cep: 13181-905 - Sumaré / SP
CNPJ: 46.062.030/0001-23 - I.E.: 671.211.366.119
F.: (19) 2104-0700 - Sac: 0800 7012903
Visite nosso site: www.adere.com
.~.
/ v \ Seja Livre, use GNU/Linux!
/ ( ) \
^^-^^
18 years, 4 months
Re:[Fedora-users-br] Mouse Serial
by Luciene
Ai vai todo o XF86Config
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 450(N)b"
DisplaySize 270 200
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "sis"
VendorName "Videocard vendor"
BoardName "SiS 530"
VideoRam 8192
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
---------- Início da mensagem original -----------
De: fedora-users-br-bounces(a)redhat.com
Para: fedora-users-br(a)redhat.com
Cc:
Data: Mon, 19 Dec 2005 18:03:27 +0000
Assunto: Re:[Fedora-users-br] Mouse Serial
> Não funco Luciene, como está a configuração do seu mouse no xorg.conf ou no
> XF86Config?
> ection "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5"
> Option "Emulate3Buttons" "yes"
> EndSection
>
> O meu está assim, pelo que eu sei essa configuração e para mouse ps/2...
> Valeuu
>
>
> >From: "Luciene" <llucienee(a)uol.com.br>
> >Reply-To: Lista de discussão voltada para os usuários brasileiros do Fedora
> ><fedora-users-br(a)redhat.com>
> >To: "fedora-users-br" <fedora-users-br(a)redhat.com>
> >Subject: Re:[Fedora-users-br] Mouse Serial
> >Date: Mon, 19 Dec 2005 15:44:22 -0200
> >
> >Ola a todos da lista...
> >
> >Bom, passei por isso semana passada, e depois de instalar e desinstalar
> >tantas vezes, reparei que eu não tinha gerado o arquivo XF86Config. Mas
> >tinha um xorg.conf, criei uma cópia deste último com o nome de XF86Config e
> >o mouse entrou belezinha.
> >
> >Depois no diga se isso tb era seu problema.
> >
> >[]s
> >
> >
> >
> >
> >---------- Início da mensagem original -----------
> >
> > De: fedora-users-br-bounces(a)redhat.com
> > Para: fedora-users-br(a)redhat.com
> > Cc:
> > Data: Mon, 19 Dec 2005 17:08:17 +0000
> > Assunto: [Fedora-users-br] Mouse Serial
> >
> > > Olá a todos da lista, estou com problemas de colocar mouse serial da
> > > microsoft no FC4 na porta COMM1, não funciona de jeito nenhum.
> > > Já tentei system-config-mouse todas as opções alguem ai teve algum
> >problema
> > > parecido com isso????
> > > O mouse funciona, pois estava instalado o win98 nele.
> > >
> > > Valeuu
> > > Abraços
> > >
> > > _________________________________________________________________
> > > Ligações gratuitas de PC-para-PC para qualquer lugar do Brasil e do
> >mundo
> > > com o MSN Messenger. Saiba mais em
> > > http://imagine-msn.com/messenger/default2.aspx?locale=pt-br
> > >
> > > --
> > > Fedora-users-br mailing list
> > > Fedora-users-br(a)redhat.com
> > > https://www.redhat.com/mailman/listinfo/fedora-users-br
> > >
> >
> >
> >--
> >Fedora-users-br mailing list
> >Fedora-users-br(a)redhat.com
> >https://www.redhat.com/mailman/listinfo/fedora-users-br
>
> _________________________________________________________________
> Ganhe tempo encontrando o arquivo ou e-mail que você precisa com Windows
> Desktop Search. Instale agora em http://desktop.msn.com.br
>
> --
> Fedora-users-br mailing list
> Fedora-users-br(a)redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-users-br
>
18 years, 4 months