PowerPC g5 Later(2005)

[Rino Rondan]

Hi,
Im trying to install  Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and
booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this
link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate  it or I did
not understand why so many steps and why iso will not work for him.
I have problem with Nvidia driver in all tested distros... Any experience or recomendation
? Im user of Fedora about more than 8 years but I see for ppc64 some distros have less
packages than others...

Regards

---
Rondan Rino
[Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification)
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
[Red Hat Certified Engineer -- RHCE --
RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-17...

Phone:[phone]

Blog:[http://www.itrestauracion.com.ar](http://www.itrestauracion.com.ar/)
Cv:[ http://cv.rinorondan.com.ar](http://www.rinorondan.com.ar/)
[http://counter.li.org](http://counter.li.org/)  Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^

Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.

[Laurent Vivier]

Le 04/03/2018 à 03:00, Rino Rondan a écrit :
>  Hi,
>  Im trying to install  Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu and
> booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw this
> link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate  it or I did
> not understand why so many steps and why iso will not work for him.
>  I have problem with Nvidia driver in all tested distros... Any experience or
> recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros
> have less packages than others... 
I have two PowerMac G5 running Fedora 27, but the only way to install it
is to install Fedora 18 and upgrade until Fedora 27. If I remember
correctly installer after F18 are broken. The problem with "nouveau"
driver should be fixed since kernel 4.3 with:

    25d295882a1a drm/nouveau/bios: fix OF loading

I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
parameter:

    video=DVI-I-1:640x480@60

But I never starts desktop session, only a console.

Thanks,
Laurent

[Rino Rondan]

Hi, Thanks for the info!!
Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release
to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses ,
because im doing dd of iso image in a pen drive, but I do not know how to boot in
OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but
not with Fedora.

Also, I want Xorg running to use as desktop to replace my old intel arch.
I will test your recommendation!!

Regards
​\-\-\-

Rondan Rino

Certificado en LPIC-3 

LPI ID:LPI000209832

Verification Code:gbblvwyfxu

Red Hat Certified Engineer -- RHCE -- RHCVA

Phone: [phone]

Blog:http://www.itrestauracion.com.ar

Cv: http://cv.rinorondan.com.ar

http://counter.li.org  Linux User -> #517918

Viva La Santa Federacion!!

Mueran Los Salvages Unitarios!!

^^^Transcripcion de la epoca ^^^

Sent from ProtonMail, encrypted email based in Switzerland.​

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On March 4, 2018 7:43 AM, Laurent Vivier <laurent(a)vivier.eu&gt; wrote:

>  ​​
>  
>  Le 04/03/2018 à 03:00, Rino Rondan a écrit :
>  
>  > Hi,
>  > 
>  > Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested ubuntu
> and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot. I saw
> this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it or I
> did not understand why so many steps and why iso will not work for him.
>  > 
>  > I have problem with Nvidia driver in all tested distros... Any experience or
> recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros
> have less packages than others...
>  
>  I have two PowerMac G5 running Fedora 27, but the only way to install it
>  
>  is to install Fedora 18 and upgrade until Fedora 27. If I remember
>  
>  correctly installer after F18 are broken. The problem with "nouveau"
>  
>  driver should be fixed since kernel 4.3 with:
>  
>  25d295882a1a drm/nouveau/bios: fix OF loading
>  
>  I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
>  
>  parameter:
>  
>  video=DVI-I-1:640x480@60
>  
>  But I never starts desktop session, only a console.
>  
>  Thanks,
>  
>  Laurent

[Rino Rondan]

Hi,

Where I can download the ppc64 f18, I can not find in
http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/

Regards


​\-\-\-

Rondan Rino

Certificado en LPIC-3 

LPI ID:LPI000209832

Verification Code:gbblvwyfxu

Red Hat Certified Engineer -- RHCE -- RHCVA

Phone: [phone]

Blog:http://www.itrestauracion.com.ar

Cv: http://cv.rinorondan.com.ar

http://counter.li.org  Linux User -> #517918

Viva La Santa Federacion!!

Mueran Los Salvages Unitarios!!

^^^Transcripcion de la epoca ^^^

Sent from ProtonMail, encrypted email based in Switzerland.​

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On March 4, 2018 9:39 AM, Rino Rondan <rrondan(a)itrestauracion.com.ar&gt; wrote:

>  ​​
>  
>  Hi, Thanks for the info!!
>  
>  Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro release
> to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader uses ,
> because im doing dd of iso image in a pen drive, but I do not know how to boot in
> OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but
> not with Fedora.
>  
>  Also, I want Xorg running to use as desktop to replace my old intel arch.
>  
>  I will test your recommendation!!
>  
>  Regards
>  
>  \-\-\-
>  
>  Rondan Rino
>  
>  Certificado en LPIC-3 
>  
>  LPI ID:LPI000209832
>  
>  Verification Code:gbblvwyfxu
>  
>  Red Hat Certified Engineer -- RHCE -- RHCVA
>  
>  Phone: [phone]
>  
>  Blog:http://www.itrestauracion.com.ar
>  
>  Cv: http://cv.rinorondan.com.ar
>  
>  http://counter.li.org  Linux User -> #517918
>  
>  Viva La Santa Federacion!!
>  
>  Mueran Los Salvages Unitarios!!
>  
>  ^^^Transcripcion de la epoca ^^^
>  
>  Sent from ProtonMail, encrypted email based in Switzerland.
>  
>  ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
>  
>  On March 4, 2018 7:43 AM, Laurent Vivier laurent(a)vivier.eu wrote:
>  
>  > Le 04/03/2018 à 03:00, Rino Rondan a écrit :
>  > 
>  > > Hi,
>  > > 
>  > > Im trying to install Fedora 27 in my PowerPc but I can not boot it, I tested
> ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare boot.
> I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not replicate it
> or I did not understand why so many steps and why iso will not work for him.
>  > > 
>  > > I have problem with Nvidia driver in all tested distros... Any experience or
> recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some distros
> have less packages than others...
>  > 
>  > I have two PowerMac G5 running Fedora 27, but the only way to install it
>  > 
>  > is to install Fedora 18 and upgrade until Fedora 27. If I remember
>  > 
>  > correctly installer after F18 are broken. The problem with "nouveau"
>  > 
>  > driver should be fixed since kernel 4.3 with:
>  > 
>  > 25d295882a1a drm/nouveau/bios: fix OF loading
>  > 
>  > I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
>  > 
>  > parameter:
>  > 
>  > video=DVI-I-1:640x480@60
>  > 
>  > But I never starts desktop session, only a console.
>  > 
>  > Thanks,
>  > 
>  > Laurent

[Rino Rondan]

I found !! sorry


​\-\-\-

Rondan Rino

Certificado en LPIC-3 

LPI ID:LPI000209832

Verification Code:gbblvwyfxu

Red Hat Certified Engineer -- RHCE -- RHCVA

Phone: [phone]

Blog:http://www.itrestauracion.com.ar

Cv: http://cv.rinorondan.com.ar

http://counter.li.org  Linux User -> #517918

Viva La Santa Federacion!!

Mueran Los Salvages Unitarios!!

^^^Transcripcion de la epoca ^^^

Sent from ProtonMail, encrypted email based in Switzerland.​

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On March 4, 2018 9:51 AM, Rino Rondan <rrondan(a)itrestauracion.com.ar&gt; wrote:

>  ​​
>  
>  Hi,
>  
>  Where I can download the ppc64 f18, I can not find in
> http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
>  
>  Regards
>  
>  \-\-\-
>  
>  Rondan Rino
>  
>  Certificado en LPIC-3 
>  
>  LPI ID:LPI000209832
>  
>  Verification Code:gbblvwyfxu
>  
>  Red Hat Certified Engineer -- RHCE -- RHCVA
>  
>  Phone: [phone]
>  
>  Blog:http://www.itrestauracion.com.ar
>  
>  Cv: http://cv.rinorondan.com.ar
>  
>  http://counter.li.org  Linux User -> #517918
>  
>  Viva La Santa Federacion!!
>  
>  Mueran Los Salvages Unitarios!!
>  
>  ^^^Transcripcion de la epoca ^^^
>  
>  Sent from ProtonMail, encrypted email based in Switzerland.
>  
>  ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
>  
>  On March 4, 2018 9:39 AM, Rino Rondan rrondan(a)itrestauracion.com.ar wrote:
>  
>  > Hi, Thanks for the info!!
>  > 
>  > Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro
> release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader
> uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in
> OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but
> not with Fedora.
>  > 
>  > Also, I want Xorg running to use as desktop to replace my old intel arch.
>  > 
>  > I will test your recommendation!!
>  > 
>  > Regards
>  > 
>  > \-\-\-
>  > 
>  > Rondan Rino
>  > 
>  > Certificado en LPIC-3
>  > 
>  > LPI ID:LPI000209832
>  > 
>  > Verification Code:gbblvwyfxu
>  > 
>  > Red Hat Certified Engineer -- RHCE -- RHCVA
>  > 
>  > Phone: [phone]
>  > 
>  > Blog:http://www.itrestauracion.com.ar
>  > 
>  > Cv: http://cv.rinorondan.com.ar
>  > 
>  > http://counter.li.org  Linux User -> #517918
>  > 
>  > Viva La Santa Federacion!!
>  > 
>  > Mueran Los Salvages Unitarios!!
>  > 
>  > ^^^Transcripcion de la epoca ^^^
>  > 
>  > Sent from ProtonMail, encrypted email based in Switzerland.
>  > 
>  > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
>  > 
>  > On March 4, 2018 7:43 AM, Laurent Vivier laurent(a)vivier.eu wrote:
>  > 
>  > > Le 04/03/2018 à 03:00, Rino Rondan a écrit :
>  > > 
>  > > > Hi,
>  > > > 
>  > > > Im trying to install Fedora 27 in my PowerPc but I can not boot it, I
> tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare
> boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not
> replicate it or I did not understand why so many steps and why iso will not work for him.
>  > > > 
>  > > > I have problem with Nvidia driver in all tested distros... Any experience
> or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some
> distros have less packages than others...
>  > > 
>  > > I have two PowerMac G5 running Fedora 27, but the only way to install it
>  > > 
>  > > is to install Fedora 18 and upgrade until Fedora 27. If I remember
>  > > 
>  > > correctly installer after F18 are broken. The problem with "nouveau"
>  > > 
>  > > driver should be fixed since kernel 4.3 with:
>  > > 
>  > > 25d295882a1a drm/nouveau/bios: fix OF loading
>  > > 
>  > > I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
>  > > 
>  > > parameter:
>  > > 
>  > > video=DVI-I-1:640x480@60
>  > > 
>  > > But I never starts desktop session, only a console.
>  > > 
>  > > Thanks,
>  > > 
>  > > Laurent
>  
>  ppc mailing list -- ppc(a)lists.fedoraproject.org
>  
>  To unsubscribe send an email to ppc-leave(a)lists.fedoraproject.org

[Rino Rondan]

I tried booting from here in fedora27 net install ppc64
 boot ud:,\boot\grub\powerpc-ieee1275\core.elf

Load everything, but hang after detect disk in random: crng init done 
Do I need to add some parameter in grub.cfg to avoid that ?

---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA 


Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org  Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!! 
^^^Transcripcion de la epoca ^^^



>  On Mar 4, 2018, at 09:54, Rino Rondan
> <rrondan(a)itrestauracion.com.ar&gt; wrote:
>  
>  I found !! sorry
>  
>  
>  ​\-\-\-
>  
>  Rondan Rino
>  
>  Certificado en LPIC-3 
>  
>  LPI ID:LPI000209832
>  
>  Verification Code:gbblvwyfxu
>  
>  Red Hat Certified Engineer -- RHCE -- RHCVA
>  
>  Phone: [phone]
>  
>  Blog:http://www.itrestauracion.com.ar
>  
>  Cv: http://cv.rinorondan.com.ar
>  
>  http://counter.li.org  Linux User -> #517918
>  
>  Viva La Santa Federacion!!
>  
>  Mueran Los Salvages Unitarios!!
>  
>  ^^^Transcripcion de la epoca ^^^
>  
>  Sent from ProtonMail, encrypted email based in Switzerland.​
>  
>  ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
>  
>  On March 4, 2018 9:51 AM, Rino Rondan <rrondan(a)itrestauracion.com.ar&gt; wrote:
>  
> > ​​
> > 
> > Hi,
> > 
> > Where I can download the ppc64 f18, I can not find in
> http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
> > 
> > Regards
> > 
> > \-\-\-
> > 
> > Rondan Rino
> > 
> > Certificado en LPIC-3 
> > 
> > LPI ID:LPI000209832
> > 
> > Verification Code:gbblvwyfxu
> > 
> > Red Hat Certified Engineer -- RHCE -- RHCVA
> > 
> > Phone: [phone]
> > 
> > Blog:http://www.itrestauracion.com.ar
> > 
> > Cv: http://cv.rinorondan.com.ar
> > 
> > http://counter.li.org  Linux User -> #517918
> > 
> > Viva La Santa Federacion!!
> > 
> > Mueran Los Salvages Unitarios!!
> > 
> > ^^^Transcripcion de la epoca ^^^
> > 
> > Sent from ProtonMail, encrypted email based in Switzerland.
> > 
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > 
> > On March 4, 2018 9:39 AM, Rino Rondan rrondan(a)itrestauracion.com.ar wrote:
> > 
> >> Hi, Thanks for the info!!
> >> 
> >> Can I update from fedora18 to fedora 27¿? I did only one upgrade from one distro
> release to another, no jumping 18 to 27? How did you do it ? And what kind of boot loader
> uses , because im doing dd of iso image in a pen drive, but I do not know how to boot in
> OpenFirmware, It worked me in other distros with yaboot and ofwboot or other binaries, but
> not with Fedora.
> >> 
> >> Also, I want Xorg running to use as desktop to replace my old intel arch.
> >> 
> >> I will test your recommendation!!
> >> 
> >> Regards
> >> 
> >> \-\-\-
> >> 
> >> Rondan Rino
> >> 
> >> Certificado en LPIC-3
> >> 
> >> LPI ID:LPI000209832
> >> 
> >> Verification Code:gbblvwyfxu
> >> 
> >> Red Hat Certified Engineer -- RHCE -- RHCVA
> >> 
> >> Phone: [phone]
> >> 
> >> Blog:http://www.itrestauracion.com.ar
> >> 
> >> Cv: http://cv.rinorondan.com.ar
> >> 
> >> http://counter.li.org  Linux User -> #517918
> >> 
> >> Viva La Santa Federacion!!
> >> 
> >> Mueran Los Salvages Unitarios!!
> >> 
> >> ^^^Transcripcion de la epoca ^^^
> >> 
> >> Sent from ProtonMail, encrypted email based in Switzerland.
> >> 
> >> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> >> 
> >> On March 4, 2018 7:43 AM, Laurent Vivier laurent(a)vivier.eu wrote:
> >> 
> >>> Le 04/03/2018 à 03:00, Rino Rondan a écrit :
> >>> 
> >>>> Hi,
> >>>> 
> >>>> Im trying to install Fedora 27 in my PowerPc but I can not boot it, I
> tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare
> boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux but I can not
> replicate it or I did not understand why so many steps and why iso will not work for him.
> >>>> 
> >>>> I have problem with Nvidia driver in all tested distros... Any experience
> or recomendation ? Im user of Fedora about more than 8 years but I see for ppc64 some
> distros have less packages than others...
> >>> 
> >>> I have two PowerMac G5 running Fedora 27, but the only way to install it
> >>> 
> >>> is to install Fedora 18 and upgrade until Fedora 27. If I remember
> >>> 
> >>> correctly installer after F18 are broken. The problem with
> "nouveau"
> >>> 
> >>> driver should be fixed since kernel 4.3 with:
> >>> 
> >>> 25d295882a1a drm/nouveau/bios: fix OF loading
> >>> 
> >>> I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
> >>> 
> >>> parameter:
> >>> 
> >>> video=DVI-I-1:640x480@60
> >>> 
> >>> But I never starts desktop session, only a console.
> >>> 
> >>> Thanks,
> >>> 
> >>> Laurent
> > 
> > ppc mailing list -- ppc(a)lists.fedoraproject.org
> > 
> > To unsubscribe send an email to ppc-leave(a)lists.fedoraproject.org
>  _______________________________________________
>  ppc mailing list -- ppc(a)lists.fedoraproject.org
>  To unsubscribe send an email to ppc-leave(a)lists.fedoraproject.org

[Rino Rondan]

I have this error after dracut crash.. Do I need to edit grub.cfg in netboot image and add
some extra parameter for video or other stuff ?


 cat rdsosreport.txt
+ cat /lib/dracut/dracut-046-5.fc27
dracut-046-5.fc27
+ cat /proc/cmdline
BOOT_IMAGE=/ppc/ppc64/vmlinuz ro
+ '[' -f /etc/cmdline ']'
+ for _i in /etc/cmdline.d/*.conf
+ '[' -f /etc/cmdline.d/99-anaconda-disable-disk-activation.conf ']'
+ echo /etc/cmdline.d/99-anaconda-disable-disk-activation.conf
/etc/cmdline.d/99-anaconda-disable-disk-activation.conf
+ cat /etc/cmdline.d/99-anaconda-disable-disk-activation.conf
rd.dm=0
rd.md=0
rd.lvm=0
rd.luks=0
+ cat /proc/self/mountinfo
1 1 0:2 / / rw shared:1 - rootfs rootfs rw,size=1156480k,nr_inodes=18070
19 1 0:19 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw
20 1 0:5 / /proc rw,nosuid,nodev,noexec,relatime shared:8 - proc proc rw
21 1 0:6 / /dev rw,nosuid shared:9 - devtmpfs devtmpfs
rw,size=1156480k,nr_inodes=18070,mode=755
22 19 0:7 / /sys/kernel/security rw,nosuid,nodev,noexec,relatime shared:3 - securityfs
securityfs rw
23 21 0:20 / /dev/shm rw,nosuid,nodev shared:10 - tmpfs tmpfs rw
24 21 0:21 / /dev/pts rw,nosuid,noexec,relatime shared:11 - devpts devpts
rw,gid=5,mode=620,ptmxmode=000
25 1 0:22 / /run rw,nosuid,nodev shared:12 - tmpfs tmpfs rw,mode=755
26 19 0:23 / /sys/fs/cgroup ro,nosuid,nodev,noexec shared:4 - tmpfs tmpfs ro,mode=755
27 26 0:24 / /sys/fs/cgroup/unified rw,nosuid,nodev,noexec,relatime shared:5 - cgroup2
cgroup rw
28 26 0:25 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime shared:6 - cgroup
cgroup rw,xattr,name=systemd
29 19 0:26 / /sys/fs/pstore rw,nosuid,nodev,noexec,relatime shared:7 - pstore pstore rw
30 26 0:27 / /sys/fs/cgroup/net_cls,net_prio rw,nosuid,nodev,noexec,relatime shared:13 -
cgroup cgroup rw,net_cls,net_prio
31 26 0:28 / /sys/fs/cgroup/pids rw,nosuid,nodev,noexec,relatime shared:14 - cgroup cgroup
rw,pids
32 26 0:29 / /sys/fs/cgroup/perf_event rw,nosuid,nodev,noexec,relatime shared:15 - cgroup
cgroup rw,perf_event
33 26 0:30 / /sys/fs/cgroup/cpu,cpuacct rw,nosuid,nodev,noexec,relatime shared:16 - cgroup
cgroup rw,cpu,cpuacct
34 26 0:31 / /sys/fs/cgroup/memory rw,nosuid,nodev,noexec,relatime shared:17 - cgroup
cgroup rw,memory
35 26 0:32 / /sys/fs/cgroup/devices rw,nosuid,nodev,noexec,relatime shared:18 - cgroup
cgroup rw,devices
36 26 0:33 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime shared:19 - cgroup
cgroup rw,freezer
37 26 0:34 / /sys/fs/cgroup/hugetlb rw,nosuid,nodev,noexec,relatime shared:20 - cgroup
cgroup rw,hugetlb
38 26 0:35 / /sys/fs/cgroup/blkio rw,nosuid,nodev,noexec,relatime shared:21 - cgroup
cgroup rw,blkio
39 26 0:36 / /sys/fs/cgroup/cpuset rw,nosuid,nodev,noexec,relatime shared:22 - cgroup
cgroup rw,cpuset
40 1 0:37 / /var/lib/nfs/rpc_pipefs rw,relatime shared:23 - rpc_pipefs rpc_pipefs rw
64 19 0:38 / /sys/kernel/config rw,relatime shared:24 - configfs configfs rw
+ cat /proc/mounts
rootfs / rootfs rw,size=1156480k,nr_inodes=18070 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
devtmpfs /dev devtmpfs rw,nosuid,size=1156480k,nr_inodes=18070,mode=755 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd 0
0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup
rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0
configfs /sys/kernel/config configfs rw,relatime 0 0
+ blkid
/dev/sda1: PARTLABEL="Apple"
/dev/sda2: LABEL="FreeBSD Bootstrap" TYPE="hfs"
/dev/sda3: UUID="5a9b44cdb1c0cae3" TYPE="ufs"
/dev/sdc1: SEC_TYPE="msdos" UUID="2D28-0C14" TYPE="vfat"
/dev/sdc4: UUID="5a94e3a1c2d9fa2c" TYPE="ufs" PTTYPE="dos"
/dev/sdb1: UUID="2017-11-05-05-03-54-00" LABEL="Fedora_S_dvd_ppc64_27"
TYPE="iso9660" PTTYPE="dos"
+ blkid -o udev
ID_FS_LABEL=FreeBSD_Bootstrap
ID_FS_LABEL_ENC=FreeBSD\x20Bootstrap
ID_FS_TYPE=hfs

ID_FS_UUID=5a9b44cdb1c0cae3
ID_FS_UUID_ENC=5a9b44cdb1c0cae3
ID_FS_TYPE=ufs

ID_FS_SEC_TYPE=msdos
ID_FS_UUID=2D28-0C14
ID_FS_UUID_ENC=2D28-0C14
ID_FS_TYPE=vfat

ID_FS_UUID=5a94e3a1c2d9fa2c
ID_FS_UUID_ENC=5a94e3a1c2d9fa2c
ID_FS_TYPE=ufs
ID_PART_TABLE_TYPE=dos

ID_FS_UUID=2017-11-05-05-03-54-00
ID_FS_UUID_ENC=2017-11-05-05-03-54-00
ID_FS_LABEL=Fedora_S_dvd_ppc64_27
ID_FS_LABEL_ENC=Fedora_S_dvd_ppc64_27
ID_FS_TYPE=iso9660
ID_PART_TABLE_TYPE=dos

ID_FS_PARTLABEL=Apple
+ ls -l /dev/disk/by-id /dev/disk/by-label /dev/disk/by-path /dev/disk/by-uuid
/dev/disk/by-id:
total 0
lrwxrwxrwx 1 root root  9 Mar  4 14:51 ata-HL-DT-ST_DVD-RW_GWA-4165B_263A7F963AFA ->
../../sr0
lrwxrwxrwx 1 root root  9 Mar  4 14:51 ata-SAMSUNG_SP2504C_S09QJ1HL952442 -> ../../sdc
lrwxrwxrwx 1 root root 10 Mar  4 14:51 ata-SAMSUNG_SP2504C_S09QJ1HL952442-part1 ->
../../sdc1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 ata-SAMSUNG_SP2504C_S09QJ1HL952442-part4 ->
../../sdc4
lrwxrwxrwx 1 root root  9 Mar  4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964 ->
../../sda
lrwxrwxrwx 1 root root 10 Mar  4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part1 ->
../../sda1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part2 ->
../../sda2
lrwxrwxrwx 1 root root 10 Mar  4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part3 ->
../../sda3
lrwxrwxrwx 1 root root 10 Mar  4 14:51 ata-WDC_WD1600JS-41MVB1_WD-WMAP01138964-part4 ->
../../sda4
lrwxrwxrwx 1 root root  9 Mar  4 14:51 usb-Generic_Flash_Disk_2070E8A6-0:0 ->
../../sdb
lrwxrwxrwx 1 root root 10 Mar  4 14:51 usb-Generic_Flash_Disk_2070E8A6-0:0-part1 ->
../../sdb1
lrwxrwxrwx 1 root root  9 Mar  4 14:51 wwn-0x50000f001b952442 -> ../../sdc
lrwxrwxrwx 1 root root 10 Mar  4 14:51 wwn-0x50000f001b952442-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 wwn-0x50000f001b952442-part4 -> ../../sdc4

/dev/disk/by-label:
total 0
lrwxrwxrwx 1 root root 10 Mar  4 14:51 Fedora_S_dvd_ppc64_27 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 FreeBSD\x20Bootstrap -> ../../sda2

/dev/disk/by-path:
total 0
lrwxrwxrwx 1 root root  9 Mar  4 14:51 pci-0001:01:0b.2-usb-0:2:1.0-scsi-0:0:0:0 ->
../../sdb
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:01:0b.2-usb-0:2:1.0-scsi-0:0:0:0-part1
-> ../../sdb1
lrwxrwxrwx 1 root root  9 Mar  4 14:51 pci-0001:03:0c.0-ata-1 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:03:0c.0-ata-1-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:03:0c.0-ata-1-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:03:0c.0-ata-1-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:03:0c.0-ata-1-part4 -> ../../sda4
lrwxrwxrwx 1 root root  9 Mar  4 14:51 pci-0001:03:0c.0-ata-2 -> ../../sdc
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:03:0c.0-ata-2-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 pci-0001:03:0c.0-ata-2-part4 -> ../../sdc4
lrwxrwxrwx 1 root root  9 Mar  4 14:51 pci-0001:03:0d.0-ata-1 -> ../../sr0

/dev/disk/by-uuid:
total 0
lrwxrwxrwx 1 root root 10 Mar  4 14:51 2017-11-05-05-03-54-00 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 2D28-0C14 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Mar  4 14:51 5a94e3a1c2d9fa2c -> ../../sdc4
lrwxrwxrwx 1 root root 10 Mar  4 14:51 5a9b44cdb1c0cae3 -> ../../sda3
+ for _i in /etc/conf.d/*.conf
+ '[' -f /etc/conf.d/systemd.conf ']'
+ echo /etc/conf.d/systemd.conf
/etc/conf.d/systemd.conf
+ cat /etc/conf.d/systemd.conf
systemdutildir="/usr/lib/systemd"
systemdsystemunitdir="/usr/lib/systemd/system"
systemdsystemconfdir="/etc/systemd/system"
+ command -v lvm
+ lvm pvdisplay
+ lvm vgdisplay
+ lvm lvdisplay
+ command -v dmsetup
+ dmsetup ls --tree
No devices found
+ cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] [linear]
unused devices: <none>
+ command -v ip
+ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enP1p5s4f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
    link/ether 00:14:51:68:33:0e brd ff:ff:ff:ff:ff:ff
3: enP1p5s4f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
    link/ether 00:14:51:68:33:0f brd ff:ff:ff:ff:ff:ff
+ command -v journalctl
+ journalctl -ab --no-pager -o short-monotonic
-- Logs begin at Sun 2018-03-04 14:51:29 UTC, end at Sun 2018-03-04 14:59:27 UTC. --
[    0.000000] localhost kernel: Allocated 2621440 bytes for 1024 pacas at
c00000000fd80000
[    0.000000] localhost kernel: Page orders: linear mapping = 24, virtual = 12, io = 12,
vmemmap = 24
[    0.000000] localhost kernel: Initializing hash mmu with SLB
[    0.000000] localhost kernel: Linux version 4.13.9-300.fc27.ppc64
(mockbuild(a)buildvm-ppc64-04.ppc.fedoraproject.org) (gcc version 7.2.1 20170915 (Red Hat
7.2.1-2) (GCC)) #1 SMP Mon Oct 23 13:31:20 UTC 2017
[    0.000000] localhost kernel: Found initrd at 0xc000000003b00000:0xc000000006cf19c4
[    0.000000] localhost kernel: Found U4 memory controller & host bridge @ 0xf8000000
revision: 0x42
[    0.000000] localhost kernel: Mapped at 0xd000080080000000
[    0.000000] localhost kernel: Found a Shasta mac-io controller, rev: 0, mapped at
0xd000080080050000
[    0.000000] localhost kernel: PowerMac motherboard: PowerMac G5 Dual Core
[    0.000000] localhost kernel: DART table allocated at: c00000007f000000
[    0.000000] localhost kernel: DART IOMMU initialized for U4 type chipset
[    0.000000] localhost kernel: Using PowerMac machine description
[    0.000000] localhost kernel: bootconsole [udbg0] enabled
[    0.000000] localhost kernel: CPU maps initialized for 1 thread per core
[    0.000000] localhost kernel:  (thread shift is 0)
[    0.000000] localhost kernel: Freed 2555904 bytes for unused pacas
[    0.000000] localhost kernel: -----------------------------------------------------
[    0.000000] localhost kernel: ppc64_pft_size    = 0x0
[    0.000000] localhost kernel: phys_mem_size     = 0xa0000000
[    0.000000] localhost kernel: dcache_bsize      = 0x80
[    0.000000] localhost kernel: icache_bsize      = 0x80
[    0.000000] localhost kernel: cpu_features      = 0x0804806318100448
[    0.000000] localhost kernel:   possible        = 0x5fffffff18500649
[    0.000000] localhost kernel:   always          = 0x0000000018100040
[    0.000000] localhost kernel: cpu_user_features = 0xdc080000 0x00000000
[    0.000000] localhost kernel: mmu_features      = 0x0c008001
[    0.000000] localhost kernel: firmware_features = 0x0000000000000000
[    0.000000] localhost kernel: htab_address      = 0xc00000011c000000
[    0.000000] localhost kernel: htab_hash_mask    = 0x7ffff
[    0.000000] localhost kernel: -----------------------------------------------------
[    0.000000] localhost kernel: cma: Reserved 128 MiB at 0x0000000113000000
[    0.000000] localhost kernel: Top of RAM: 0x120000000, Total RAM: 0xa0000000
[    0.000000] localhost kernel: Memory hole size: 2048MB
[    0.000000] localhost kernel: numa:   NODE_DATA [mem 0x11bfbc300-0x11bfc5fff]
[    0.000000] localhost kernel: Found U4-PCIE PCI host bridge.  Firmware bus number:
0->255
[    0.000000] localhost kernel: PCI host bridge /pci@0,f0000000  ranges:
[    0.000000] localhost kernel:  MEM 0x00000000f1000000..0x00000000f1ffffff ->
0x00000000f1000000
[    0.000000] localhost kernel:   IO 0x00000000f0000000..0x00000000f07fffff ->
0x0000000000000000
[    0.000000] localhost kernel:  MEM 0x0000000090000000..0x000000009fffffff ->
0x0000000090000000
[    0.000000] localhost kernel: Can't get bus-range for /ht@0,f2000000, assume bus 0
[    0.000000] localhost kernel: Found U3-HT PCI host bridge.  Firmware bus number:
0->239
[    0.000000] localhost kernel: PCI host bridge /ht@0,f2000000 (primary) ranges:
[    0.000000] localhost kernel: SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM
Corp.
[    0.000000] localhost kernel: nvram: Checking bank 0...
[    0.000000] localhost kernel: nvram: gen0=1835, gen1=1836
[    0.000000] localhost kernel: nvram: Active bank is: 1
[    0.000000] localhost kernel: nvram: OF partition at 0x410
[    0.000000] localhost kernel: nvram: XP partition at 0x1020
[    0.000000] localhost kernel: nvram: NR partition at 0x1120
[    0.000000] localhost kernel: Top of RAM: 0x120000000, Total RAM: 0xa0000000
[    0.000000] localhost kernel: Memory hole size: 2048MB
[    0.000000] localhost kernel: Zone ranges:
[    0.000000] localhost kernel:   DMA      [mem 0x0000000000000000-0x000000011fffffff]
[    0.000000] localhost kernel:   DMA32    empty
[    0.000000] localhost kernel:   Normal   empty
[    0.000000] localhost kernel: Movable zone start for each node
[    0.000000] localhost kernel: Early memory node ranges
[    0.000000] localhost kernel:   node   0: [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000] localhost kernel:   node   0: [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000] localhost kernel: Initmem setup node 0 [mem
0x0000000000000000-0x000000011fffffff]
[    0.000000] localhost kernel: On node 0 totalpages: 40960
[    0.000000] localhost kernel:   DMA zone: 40 pages used for memmap
[    0.000000] localhost kernel:   DMA zone: 0 pages reserved
[    0.000000] localhost kernel:   DMA zone: 40960 pages, LIFO batch:1
[    0.000000] localhost kernel: percpu: Embedded 3 pages/cpu @c00000011be00000 s151064 r0
d45544 u524288
[    0.000000] localhost kernel: pcpu-alloc: s151064 r0 d45544 u524288 alloc=1*1048576
[    0.000000] localhost kernel: pcpu-alloc: [0] 0 1
[    0.000000] localhost kernel: Built 1 zonelists in Node order, mobility grouping on. 
Total pages: 40920
[    0.000000] localhost kernel: Policy zone: DMA
[    0.000000] localhost kernel: Kernel command line: BOOT_IMAGE=/ppc/ppc64/vmlinuz ro
[    0.000000] localhost kernel: PID hash table entries: 4096 (order: -1, 32768 bytes)
[    0.000000] localhost kernel: Memory: 2312960K/2621440K available (11712K kernel code,
2368K rwdata, 3776K rodata, 6016K init, 2408K bss, 177408K reserved, 131072K
cma-reserved)
[    0.000000] localhost kernel: random: get_random_u64 called from
.cache_random_seq_create+0x90/0x170 with crng_init=0
[    0.000000] localhost kernel: SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[    0.000000] localhost kernel: ftrace: allocating 30304 entries in 12 pages
[    0.000000] localhost kernel: Hierarchical RCU implementation.
[    0.000000] localhost kernel: 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
[    0.000000] localhost kernel: 	Tasks RCU enabled.
[    0.000000] localhost kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=2
[    0.000000] localhost kernel: NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] localhost kernel: mpic: Resetting
[    0.000000] localhost kernel: mpic: Setting up MPIC " MPIC 1   " version 1.2
at f8040000, max 2 CPUs
[    0.000000] localhost kernel: mpic: ISU size: 124, shift: 7, mask: 7f
[    0.000000] localhost kernel: mpic: Initializing for 124 sources
[    0.000000] localhost kernel: mpic: Setting up HT PICs workarounds for U3/U4
[    0.000000] localhost kernel: mpic:   - HT:01.0 disabled MSI mapping found @
0xfee00000
[    0.000000] localhost kernel: mpic:   - HT:02.0 disabled MSI mapping found @
0xfee00000
[    0.000000] localhost kernel: mpic:   - HT:03.0 disabled MSI mapping found @
0xfee00000
[    0.000000] localhost kernel: mpic:   - HT:04.0 disabled MSI mapping found @
0xfee00000
[    0.000000] localhost kernel: mpic:   - HT:05.0 disabled MSI mapping found @
0xfee00000
[    0.000000] localhost kernel: mpic:   - HT:06.0 disabled MSI mapping found @
0xfee00000
[    0.000000] localhost kernel: mpic:   - HT:07.0 [0x90] vendor 106b device 0053 has 86
irqs
[    0.000000] localhost kernel: time_init: decrementer frequency = 33.333333 MHz
[    0.000000] localhost kernel: time_init: processor frequency   = 2000.000000 MHz
[    0.000003] localhost kernel: clocksource: timebase: mask: 0xffffffffffffffff
max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns
[    0.000378] localhost kernel: clocksource: timebase mult[1e000005] shift[24]
registered
[    0.000694] localhost kernel: clockevent: decrementer mult[8888887] shift[32] cpu[0]
[    0.000761] localhost kernel: Console: colour dummy device 80x25
[    0.001046] localhost kernel: console [tty0] enabled
[    0.001316] localhost kernel: bootconsole [udbg0] disabled
[    0.001706] localhost kernel: pid_max: default: 32768 minimum: 301
[    0.002117] localhost kernel: Security Framework initialized
[    0.002123] localhost kernel: Yama: becoming mindful.
[    0.002135] localhost kernel: SELinux:  Initializing.
[    0.002269] localhost kernel: SELinux:  Starting in permissive mode
[    0.003545] localhost kernel: Dentry cache hash table entries: 524288 (order: 6,
4194304 bytes)
[    0.004264] localhost kernel: Inode-cache hash table entries: 262144 (order: 5, 2097152
bytes)
[    0.004356] localhost kernel: Mount-cache hash table entries: 8192 (order: 0, 65536
bytes)
[    0.004385] localhost kernel: Mountpoint-cache hash table entries: 8192 (order: 0,
65536 bytes)
[    0.005766] localhost kernel: PowerMac SMP probe found 2 cpus
[    0.005896] localhost kernel: KeyWest i2c @0xf8001003 irq 16
/u4@0,f8000000/i2c@f8001000
[    0.005905] localhost kernel:  channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
[    0.005960] localhost kernel: KeyWest i2c @0x80018000 irq 27
/ht@0,f2000000/pci@8/mac-io@7/i2c@18000
[    0.005969] localhost kernel:  channel 0 bus
/ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[    0.005978] localhost kernel:  channel 0 bus
/ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
[    0.006026] localhost kernel: SMU i2c /smu@0,0/smu-i2c-control@0
[    0.006033] localhost kernel:  channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
[    0.006040] localhost kernel:  channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
[    0.006063] localhost kernel: Processor timebase sync using platform function
[    0.006069] localhost kernel: mpic: requesting IPIs...
[    0.006274] localhost kernel: PPC970/FX/MP performance monitor hardware support
registered
[    0.006334] localhost kernel: Hierarchical SRCU implementation.
[    0.007257] localhost kernel: smp: Bringing up secondary CPUs ...
[    0.009205] localhost kernel: smp: Brought up 1 node, 2 CPUs
[    0.010589] localhost kernel: devtmpfs: initialized
[    0.016380] localhost kernel: OF: Duplicate name in i2c@18000, renamed to
"i2c-bus@0#1"
[    0.018190] localhost kernel: clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018212] localhost kernel: futex hash table entries: 512 (order: 0, 65536 bytes)
[    0.019003] localhost kernel: NET: Registered protocol family 16
[    0.019027] localhost kernel: eeh_init: Platform EEH operation not found
[    0.019128] localhost kernel: IBM eBus Device Driver
[    0.019710] localhost kernel: cpuidle: using governor menu
[    0.021184] localhost kernel: PCI: Probing PCI hardware
[    0.021266] localhost kernel: PCI host bridge to bus 0000:00
[    0.021277] localhost kernel: pci_bus 0000:00: root bus resource [io  0x10000-0x80ffff]
(bus address [0x0000-0x7fffff])
[    0.021287] localhost kernel: pci_bus 0000:00: root bus resource [mem
0xf1000000-0xf1ffffff]
[    0.021294] localhost kernel: pci_bus 0000:00: root bus resource [mem
0x90000000-0x9fffffff]
[    0.021303] localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.021313] localhost kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to
ff
[    0.021349] localhost kernel: pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400
[    0.021395] localhost kernel: PCI: Fixup U4 PCIe bridge range: [mem
0x90000000-0x9fffffff]
[    0.021442] localhost kernel: pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[    0.023514] localhost kernel: IOMMU table initialized, virtual merging enabled
[    0.023655] localhost kernel: pci 0000:0a:00.0: [10de:0142] type 00 class 0x030000
[    0.023684] localhost kernel: pci 0000:0a:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[    0.023699] localhost kernel: pci 0000:0a:00.0: reg 0x14: [mem 0x98000000-0x9fffffff
64bit pref]
[    0.023714] localhost kernel: pci 0000:0a:00.0: reg 0x1c: [mem 0x91000000-0x91ffffff
64bit]
[    0.023731] localhost kernel: pci 0000:0a:00.0: reg 0x30: [mem 0x90000000-0x9001ffff
pref]
[    0.023877] localhost kernel: pci 0000:00:0b.0: PCI bridge to [bus 0a]
[    0.023890] localhost kernel: pci 0000:00:0b.0:   bridge window [io  0x10000-0x1ffff]
[    0.023895] localhost kernel: pci 0000:00:0b.0:   bridge window [mem
0x90000000-0x9fffffff]
[    0.023902] localhost kernel: pci 0000:00:0b.0:   bridge window [mem
0x00000000-0x000fffff 64bit pref]
[    0.023969] localhost kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to
0a
[    0.024038] localhost kernel: PCI host bridge to bus 0001:00
[    0.024048] localhost kernel: pci_bus 0001:00: root bus resource [io 
0x820000-0xc1ffff] (bus address [0x0000-0x3fffff])
[    0.024057] localhost kernel: pci_bus 0001:00: root bus resource [mem
0xfa000000-0xffffffff]
[    0.024065] localhost kernel: pci_bus 0001:00: root bus resource [mem
0x80000000-0x8fffffff]
[    0.024073] localhost kernel: pci_bus 0001:00: root bus resource [mem
0xa0000000-0xefffffff]
[    0.024081] localhost kernel: pci_bus 0001:00: root bus resource [bus 00-ef]
[    0.024090] localhost kernel: pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to
ff
[    0.024112] localhost kernel: pci 0001:00:00.0: [106b:0074] type 00 class 0x060000
[    0.024205] localhost kernel: pci 0001:00:01.0: [1166:0130] type 01 class 0x060400
[    0.024317] localhost kernel: pci 0001:00:02.0: [1166:0130] type 01 class 0x060400
[    0.024428] localhost kernel: pci 0001:00:03.0: [1166:0132] type 01 class 0x060400
[    0.024541] localhost kernel: pci 0001:00:04.0: [1166:0132] type 01 class 0x060400
[    0.024655] localhost kernel: pci 0001:00:05.0: [1166:0132] type 01 class 0x060400
[    0.024770] localhost kernel: pci 0001:00:06.0: [1166:0132] type 01 class 0x060400
[    0.024886] localhost kernel: pci 0001:00:07.0: [106b:0053] type 01 class 0x060400
[    0.025012] localhost kernel: pci 0001:00:08.0: [106b:0054] type 01 class 0x060400
[    0.025130] localhost kernel: pci 0001:00:09.0: [106b:0055] type 01 class 0x060400
[    0.025324] localhost kernel: pci 0001:00:01.0: PCI bridge to [bus 04]
[    0.025398] localhost kernel: pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000
[    0.025417] localhost kernel: pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff
64bit]
[    0.025426] localhost kernel: pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff
64bit]
[    0.025474] localhost kernel: pci 0001:05:04.0: PME# supported from D3hot D3cold
[    0.025558] localhost kernel: pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000
[    0.025576] localhost kernel: pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff
64bit]
[    0.025586] localhost kernel: pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff
64bit]
[    0.025633] localhost kernel: pci 0001:05:04.1: PME# supported from D3hot D3cold
[    0.025739] localhost kernel: pci 0001:00:02.0: PCI bridge to [bus 05]
[    0.025751] localhost kernel: pci 0001:00:02.0:   bridge window [mem
0xfa500000-0xfa5fffff]
[    0.025849] localhost kernel: pci 0001:00:03.0: PCI bridge to [bus 06]
[    0.025912] localhost kernel: pci 0001:00:04.0: PCI bridge to [bus 07]
[    0.025974] localhost kernel: pci 0001:00:05.0: PCI bridge to [bus 08]
[    0.026037] localhost kernel: pci 0001:00:06.0: PCI bridge to [bus 09]
[    0.026107] localhost kernel: pci 0001:00:07.0: PCI bridge to [bus 02]
[    0.026121] localhost kernel: pci 0001:00:07.0:   bridge window [mem
0xfa000000-0xfa3fffff]
[    0.026126] localhost kernel: pci 0001:00:07.0:   bridge window [mem
0x00000000-0x000fffff pref]
[    0.026186] localhost kernel: pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000
[    0.026201] localhost kernel: pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[    0.026310] localhost kernel: pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310
[    0.026328] localhost kernel: pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff]
[    0.026384] localhost kernel: pci 0001:01:0b.0: supports D1 D2
[    0.026387] localhost kernel: pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot
D3cold
[    0.026467] localhost kernel: pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310
[    0.026485] localhost kernel: pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff]
[    0.026541] localhost kernel: pci 0001:01:0b.1: supports D1 D2
[    0.026544] localhost kernel: pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot
D3cold
[    0.026621] localhost kernel: pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320
[    0.026639] localhost kernel: pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff]
[    0.026695] localhost kernel: pci 0001:01:0b.2: supports D1 D2
[    0.026697] localhost kernel: pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot
D3cold
[    0.026769] localhost kernel: pci 0001:00:08.0: PCI bridge to [bus 01]
[    0.026783] localhost kernel: pci 0001:00:08.0:   bridge window [mem
0x80000000-0x800fffff]
[    0.026788] localhost kernel: pci 0001:00:08.0:   bridge window [mem
0x00000000-0x000fffff pref]
[    0.026894] localhost kernel: pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f
[    0.026908] localhost kernel: pci 0001:03:0c.0: reg 0x10: [io  0x820000-0x820007]
[    0.026916] localhost kernel: pci 0001:03:0c.0: reg 0x14: [io  0x820000-0x820003]
[    0.026924] localhost kernel: pci 0001:03:0c.0: reg 0x18: [io  0x820000-0x820007]
[    0.026932] localhost kernel: pci 0001:03:0c.0: reg 0x1c: [io  0x820000-0x820003]
[    0.026940] localhost kernel: pci 0001:03:0c.0: reg 0x20: [io  0x820000-0x82000f]
[    0.026948] localhost kernel: pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff]
[    0.027031] localhost kernel: pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000
[    0.027044] localhost kernel: pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff]
[    0.027143] localhost kernel: pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010
[    0.027159] localhost kernel: pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff]
[    0.027211] localhost kernel: pci 0001:03:0e.0: supports D1 D2
[    0.027214] localhost kernel: pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.027282] localhost kernel: pci 0001:00:09.0: PCI bridge to [bus 03]
[    0.027296] localhost kernel: pci 0001:00:09.0:   bridge window [mem
0xfa400000-0xfa4fffff]
[    0.027301] localhost kernel: pci 0001:00:09.0:   bridge window [mem
0x00000000-0x000fffff pref]
[    0.027395] localhost kernel: pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to
09
[    0.027517] localhost kernel: PCI 0000:00 Cannot reserve Legacy IO [io 
0x10000-0x10fff]
[    0.027535] localhost kernel: pci 0000:00:0b.0: BAR 15: assigned [mem
0xf1000000-0xf10fffff 64bit pref]
[    0.027546] localhost kernel: pci 0000:00:0b.0: PCI bridge to [bus 0a]
[    0.027554] localhost kernel: pci 0000:00:0b.0:   bridge window [io  0x10000-0x1ffff]
[    0.027564] localhost kernel: pci 0000:00:0b.0:   bridge window [mem
0x90000000-0x9fffffff]
[    0.027574] localhost kernel: pci 0000:00:0b.0:   bridge window [mem
0xf1000000-0xf10fffff 64bit pref]
[    0.027586] localhost kernel: pci_bus 0000:00: resource 4 [io  0x10000-0x80ffff]
[    0.027589] localhost kernel: pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[    0.027592] localhost kernel: pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
[    0.027595] localhost kernel: pci_bus 0000:0a: resource 0 [io  0x10000-0x1ffff]
[    0.027598] localhost kernel: pci_bus 0000:0a: resource 1 [mem 0x90000000-0x9fffffff]
[    0.027600] localhost kernel: pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff
64bit pref]
[    0.027644] localhost kernel: pci 0001:00:01.0: PCI bridge to [bus 04]
[    0.027655] localhost kernel: pci 0001:00:02.0: PCI bridge to [bus 05]
[    0.027664] localhost kernel: pci 0001:00:02.0:   bridge window [mem
0xfa500000-0xfa5fffff]
[    0.027674] localhost kernel: pci 0001:00:03.0: PCI bridge to [bus 06]
[    0.027684] localhost kernel: pci 0001:00:04.0: PCI bridge to [bus 07]
[    0.027695] localhost kernel: pci 0001:00:05.0: PCI bridge to [bus 08]
[    0.027706] localhost kernel: pci 0001:00:06.0: PCI bridge to [bus 09]
[    0.027716] localhost kernel: pci 0001:00:07.0: PCI bridge to [bus 02]
[    0.027725] localhost kernel: pci 0001:00:07.0:   bridge window [mem
0xfa000000-0xfa3fffff]
[    0.027736] localhost kernel: pci 0001:00:08.0: PCI bridge to [bus 01]
[    0.027744] localhost kernel: pci 0001:00:08.0:   bridge window [mem
0x80000000-0x800fffff]
[    0.027755] localhost kernel: pci 0001:00:09.0: PCI bridge to [bus 03]
[    0.027764] localhost kernel: pci 0001:00:09.0:   bridge window [mem
0xfa400000-0xfa4fffff]
[    0.027774] localhost kernel: pci_bus 0001:00: resource 4 [io  0x820000-0xc1ffff]
[    0.027777] localhost kernel: pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
[    0.027780] localhost kernel: pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[    0.027783] localhost kernel: pci_bus 0001:00: resource 7 [mem 0xa0000000-0xefffffff]
[    0.027786] localhost kernel: pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff]
[    0.027789] localhost kernel: pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff]
[    0.027792] localhost kernel: pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
[    0.027795] localhost kernel: pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff]
[    0.027796] localhost kernel: PCI: Probing PCI hardware done
[    0.034877] localhost kernel: HugeTLB registered 16.0 MiB page size, pre-allocated 0
pages
[    0.035638] localhost kernel: pci 0000:0a:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=none,locks=none
[    0.035677] localhost kernel: pci 0000:0a:00.0: vgaarb: bridge control possible
[    0.035682] localhost kernel: vgaarb: loaded
[    0.035917] localhost kernel: SCSI subsystem initialized
[    0.036016] localhost kernel: libata version 3.00 loaded.
[    0.036111] localhost kernel: usbcore: registered new interface driver usbfs
[    0.036134] localhost kernel: usbcore: registered new interface driver hub
[    0.036164] localhost kernel: usbcore: registered new device driver usb
[    0.036285] localhost kernel: EDAC MC: Ver: 3.0.0
[    0.036771] localhost kernel: NetLabel: Initializing
[    0.036778] localhost kernel: NetLabel:  domain hash size = 128
[    0.036783] localhost kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.036818] localhost kernel: NetLabel:  unlabeled traffic allowed by default
[    0.037071] localhost kernel: clocksource: Switched to clocksource timebase
[    0.073254] localhost kernel: VFS: Disk quotas dquot_6.6.0
[    0.073364] localhost kernel: VFS: Dquot-cache hash table entries: 8192 (order 0, 65536
bytes)
[    0.077671] localhost kernel: NET: Registered protocol family 2
[    0.078031] localhost kernel: TCP established hash table entries: 32768 (order: 2,
262144 bytes)
[    0.078311] localhost kernel: TCP bind hash table entries: 32768 (order: 3, 524288
bytes)
[    0.079102] localhost kernel: TCP: Hash tables configured (established 32768 bind
32768)
[    0.079209] localhost kernel: UDP hash table entries: 2048 (order: 0, 65536 bytes)
[    0.079286] localhost kernel: UDP-Lite hash table entries: 2048 (order: 0, 65536
bytes)
[    0.079549] localhost kernel: NET: Registered protocol family 1
[    0.079592] localhost kernel: PCI: CLS mismatch (32 != 64), using 128 bytes
[    0.079614] localhost kernel: pci 0001:00:03.0: Found enabled HT MSI Mapping
[    0.079629] localhost kernel: pci 0001:00:04.0: Found enabled HT MSI Mapping
[    0.079643] localhost kernel: pci 0001:00:05.0: Found enabled HT MSI Mapping
[    0.079656] localhost kernel: pci 0001:00:06.0: Found enabled HT MSI Mapping
[    0.079697] localhost kernel: pci 0001:01:0b.0: enabling device (0000 -> 0002)
[    0.147122] localhost kernel: pci 0001:01:0b.1: enabling device (0000 -> 0002)
[    0.217089] localhost kernel: pci 0001:01:0b.2: enabling device (0004 -> 0006)
[    0.217230] localhost kernel: Unpacking initramfs...
[   11.904686] localhost kernel: Freeing initrd memory: 51136K
[   11.905104] localhost kernel: rtas_flash: no firmware flash support
[   11.905875] localhost kernel: audit: initializing netlink subsys (disabled)
[   11.906197] localhost kernel: audit: type=2000 audit(1520175085.899:1):
state=initialized audit_enabled=0 res=1
[   11.907245] localhost kernel: Initialise system trusted keyrings
[   11.907277] localhost kernel: Key type blacklist registered
[   11.907371] localhost kernel: workingset: timestamp_bits=38 max_order=16
bucket_order=0
[   11.910642] localhost kernel: zbud: loaded
[   11.912556] localhost kernel: SELinux:  Registering netfilter hooks
[   12.107079] localhost kernel: random: fast init done
[   12.347050] localhost kernel: NET: Registered protocol family 38
[   12.347103] localhost kernel: Key type asymmetric registered
[   12.347110] localhost kernel: Asymmetric key parser 'x509' registered
[   12.347258] localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[   12.347360] localhost kernel: io scheduler noop registered
[   12.347366] localhost kernel: io scheduler deadline registered
[   12.347465] localhost kernel: io scheduler cfq registered (default)
[   12.347471] localhost kernel: io scheduler mq-deadline registered
[   12.347608] localhost kernel: atomic64_test: passed
[   12.347890] localhost kernel: Using unsupported 1280x1024 NVDA,Display-A at 98020000,
depth=8, pitch=1536
[   12.375719] localhost kernel: Console: switching to colour frame buffer device 160x64
[   12.403368] localhost kernel: fb0: Open Firmware frame buffer device on
/pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0
[   12.403952] localhost kernel: Linux agpgart interface v0.103
[   12.404292] localhost kernel: MacIO PCI driver attached to Shasta chipset
[   12.405369] localhost kernel: Uniform Multi-Platform E-IDE driver
[   12.405582] localhost kernel: ide-gd driver 1.18
[   12.405879] localhost kernel: pata-pci-macio 0001:03:0d.0: enabling device (0004 ->
0006)
[   12.427090] localhost kernel: pata-pci-macio 0001:03:0d.0: Activating pata-macio
chipset Shasta ATA-6, Apple bus ID 3
[   12.427792] localhost kernel: scsi host0: pata_macio
[   12.427999] localhost kernel: ata1: PATA max UDMA/133 irq 38
[   12.428254] localhost kernel: libphy: Fixed MDIO Bus: probed
[   12.428493] localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller
(EHCI) Driver
[   12.428733] localhost kernel: ehci-pci: EHCI PCI platform driver
[   12.428975] localhost kernel: ehci-pci 0001:01:0b.2: EHCI Host Controller
[   12.429209] localhost kernel: ehci-pci 0001:01:0b.2: new USB bus registered, assigned
bus number 1
[   12.429691] localhost kernel: ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000
[   12.457078] localhost kernel: ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00
[   12.457365] localhost kernel: usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[   12.457584] localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.457815] localhost kernel: usb usb1: Product: EHCI Host Controller
[   12.457972] localhost kernel: usb usb1: Manufacturer: Linux 4.13.9-300.fc27.ppc64
ehci_hcd
[   12.458186] localhost kernel: usb usb1: SerialNumber: 0001:01:0b.2
[   12.458546] localhost kernel: hub 1-0:1.0: USB hub found
[   12.458680] localhost kernel: hub 1-0:1.0: 5 ports detected
[   12.459184] localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
Driver
[   12.459416] localhost kernel: ohci-pci: OHCI PCI platform driver
[   12.459605] localhost kernel: ohci-pci 0001:01:0b.0: OHCI PCI host controller
[   12.459925] localhost kernel: ohci-pci 0001:01:0b.0: new USB bus registered, assigned
bus number 2
[   12.460255] localhost kernel: ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000
[   12.546975] localhost kernel: usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[   12.547195] localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.547422] localhost kernel: usb usb2: Product: OHCI PCI host controller
[   12.547590] localhost kernel: usb usb2: Manufacturer: Linux 4.13.9-300.fc27.ppc64
ohci_hcd
[   12.547804] localhost kernel: usb usb2: SerialNumber: 0001:01:0b.0
[   12.548171] localhost kernel: hub 2-0:1.0: USB hub found
[   12.548305] localhost kernel: hub 2-0:1.0: 3 ports detected
[   12.548666] localhost kernel: ohci-pci 0001:01:0b.1: OHCI PCI host controller
[   12.548918] localhost kernel: ohci-pci 0001:01:0b.1: new USB bus registered, assigned
bus number 3
[   12.549249] localhost kernel: ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000
[   12.627461] localhost kernel: ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max
UDMA/66
[   12.636974] localhost kernel: usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[   12.645429] localhost kernel: usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.653911] localhost kernel: usb usb3: Product: OHCI PCI host controller
[   12.662391] localhost kernel: usb usb3: Manufacturer: Linux 4.13.9-300.fc27.ppc64
ohci_hcd
[   12.667408] localhost kernel: ata1.00: configured for UDMA/66
[   12.679435] localhost kernel: usb usb3: SerialNumber: 0001:01:0b.1
[   12.687944] localhost kernel: blk_queue_max_segment_size: set to minimum 65536
[   12.688152] localhost kernel: hub 3-0:1.0: USB hub found
[   12.688168] localhost kernel: hub 3-0:1.0: 2 ports detected
[   12.688372] localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
[   12.688523] localhost kernel: usbcore: registered new interface driver usbserial
[   12.688537] localhost kernel: usbcore: registered new interface driver
usbserial_generic
[   12.688548] localhost kernel: usbserial: USB Serial support registered for generic
[   12.688803] localhost kernel: mousedev: PS/2 mouse device common for all mice
[   12.737350] localhost kernel: rtc-generic rtc-generic: rtc core: registered rtc-generic
as rtc0
[   12.737534] localhost kernel: device-mapper: uevent: version 1.0.3
[   12.737678] localhost kernel: device-mapper: ioctl: 4.37.0-ioctl (2017-09-20)
initialised: dm-devel(a)redhat.com
[   12.767086] localhost kernel: pmac64_cpufreq: Registering G5 CPU frequency driver
[   12.767088] localhost kernel: pmac64_cpufreq: Frequency method: SCOM, Voltage method:
GPIO
[   12.767089] localhost kernel: pmac64_cpufreq: Low: 1000 Mhz, High: 2000 Mhz, Cur: 2000
MHz
[   12.767185] localhost kernel: hidraw: raw HID events driver (C) Jiri Kosina
[   12.767276] localhost kernel: usbcore: registered new interface driver usbhid
[   12.767276] localhost kernel: usbhid: USB HID core driver
[   12.767378] localhost kernel: drop_monitor: Initializing network drop monitor service
[   12.767509] localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.767534] localhost kernel: Initializing XFRM netlink socket
[   12.767879] localhost kernel: NET: Registered protocol family 10
[   12.776254] localhost kernel: Segment Routing with IPv6
[   12.776299] localhost kernel: mip6: Mobile IPv6
[   12.776304] localhost kernel: NET: Registered protocol family 17
[   12.776374] localhost kernel: Running MSI bitmap self-tests ...
[   12.776831] localhost kernel: registered taskstats version 1
[   12.776850] localhost kernel: Loading compiled-in X.509 certificates
[   12.879512] localhost kernel: usb 1-1: new high-speed USB device number 2 using
ehci-pci
[   12.882104] localhost kernel: Loaded X.509 cert 'Fedora kernel signing key:
c8c3e52204a80187568063a7960c8a7cd369fa10'
[   12.882203] localhost kernel: zswap: loaded using pool lzo/zbud
[   12.890471] localhost kernel: Key type big_key registered
[   12.898352] localhost kernel: Key type encrypted registered
[   12.954195] localhost kernel: rtc-generic rtc-generic: setting system clock to
2018-03-04 14:51:27 UTC (1520175087)
[   12.965353] localhost kernel: scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4165B
C006 PQ: 0 ANSI: 5
[   12.974127] localhost kernel: ata1.00: K2/Shasta alignment limits applied
[   13.021121] localhost kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw
xa/form2 cdda tray
[   13.037202] localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
[   13.046496] localhost kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
[   13.046635] localhost kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
[   13.062467] localhost kernel: Freeing unused kernel memory: 6016K
[   13.071351] localhost kernel: This architecture does not have kernel memory
protection.
[   13.098964] localhost kernel: usb 1-1: New USB device found, idVendor=148f,
idProduct=5370
[   13.108025] localhost kernel: usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[   13.117149] localhost kernel: usb 1-1: Product: 802.11 n WLAN
[   13.126124] localhost kernel: usb 1-1: Manufacturer: Ralink
[   13.135057] localhost kernel: usb 1-1: SerialNumber: 1.0
[   13.277080] localhost kernel: usb 1-2: new high-speed USB device number 3 using
ehci-pci
[   13.316919] localhost systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT
+SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ
+LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   13.336171] localhost systemd[1]: Detected architecture ppc64.
[   13.345649] localhost systemd[1]: Running in initial RAM disk.
[   13.383743] localhost systemd[1]: No hostname configured.
[   13.393335] localhost systemd[1]: Set hostname to <localhost>.
[   13.403140] localhost systemd[1]: Initializing machine ID from random generator.
[   13.485022] localhost kernel: usb 1-2: New USB device found, idVendor=058f,
idProduct=6387
[   13.495051] localhost kernel: usb 1-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[   13.504745] localhost kernel: usb 1-2: Product: Mass Storage
[   13.514400] localhost kernel: usb 1-2: Manufacturer: Generic
[   13.523844] localhost kernel: usb 1-2: SerialNumber: 2070E8A6
[   14.031184] localhost systemd[1]: Listening on Journal Socket (/dev/log).
[   14.047087] localhost kernel: usb 2-2: new low-speed USB device number 2 using
ohci-pci
[   14.060040] localhost systemd[1]: Reached target Initrd Root Device.
[   14.079251] localhost systemd[1]: Reached target Local File Systems.
[   14.099104] localhost systemd[1]: Listening on Journal Audit Socket.
[   14.342170] localhost kernel: usb 2-2: New USB device found, idVendor=1bcf,
idProduct=0053
[   14.351713] localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[   14.361328] localhost kernel: usb 2-2: Product: USB Optical Mouse
[   14.409576] localhost kernel: input: USB Optical Mouse  as
/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:1BCF:0053.0001/input/input0
[   14.477397] localhost kernel: hid-generic 0003:1BCF:0053.0001: input,hidraw0: USB HID
v1.10 Keyboard [USB Optical Mouse ] on usb-0001:01:0b.0-2/input0
[   14.897122] localhost kernel: usb 3-2: new low-speed USB device number 2 using
ohci-pci
[   15.009419] localhost kernel: audit: type=1130 audit(1520175089.562:2): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   15.035430] localhost systemd-journald[159]: Journal started
[   15.035898] localhost systemd-journald[159]: Runtime journal
(/run/log/journal/7444064ef2fa422cb291a5a3166a19ad) is 8.0M, max 122.1M, 114.1M free.
[   15.036092] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.037729] localhost dracut-cmdline[165]: dracut-27 (Twenty Seven) dracut-046-5.fc27
[   15.037729] localhost dracut-cmdline[165]: Using kernel command line parameters:
BOOT_IMAGE=/ppc/ppc64/vmlinuz ro
[   15.058318] localhost dracut-cmdline[165]: Loading Fedora 27 ppc64p7 installer...
[   15.059003] localhost multipathd[170]: --------start up--------
[   15.059003] localhost multipathd[170]: read /etc/multipath.conf
[   15.059003] localhost multipathd[170]: path checkers start up
[   15.063551] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.070603] localhost kernel: audit: type=1130 audit(1520175089.612:3): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   15.103237] localhost kernel: audit: type=1130 audit(1520175089.656:4): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   15.119803] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.121703] localhost systemd[1]: Started Create Static Device Nodes in /dev.
[   15.159510] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   15.141950] localhost kernel: audit: type=1130 audit(1520175089.694:5): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   15.231594] localhost kernel: usb 3-2: New USB device found, idVendor=0c45,
idProduct=7603
[   15.244185] localhost kernel: usb 3-2: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[   15.256750] localhost kernel: usb 3-2: Product: USB Keyboard
[   15.278200] localhost kernel: input: USB Keyboard as
/devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.0/0003:0C45:7603.0002/input/input1
[   15.357453] localhost kernel: hid-generic 0003:0C45:7603.0002: input,hidraw1: USB HID
v1.11 Keyboard [USB Keyboard] on usb-0001:01:0b.1-2/input0
[   15.379323] localhost kernel: input: USB Keyboard as
/devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.1/0003:0C45:7603.0003/input/input2
[   15.457328] localhost kernel: hid-generic 0003:0C45:7603.0003: input,hiddev96,hidraw2:
USB HID v1.11 Keyboard [USB Keyboard] on usb-0001:01:0b.1-2/input1
[   15.647222] localhost dracut-cmdline[165]: rd.luks=0: removing cryptoluks activation
[   15.717304] localhost dracut-cmdline[165]: rd.lvm=0: removing LVM activation
[   15.920245] localhost systemd[1]: Started dracut cmdline hook.
[   15.940059] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.953166] localhost systemd[1]: Starting dracut pre-udev hook...
[   15.933771] localhost kernel: audit: type=1130 audit(1520175090.486:6): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   15.970260] localhost systemd[1]: Starting Open-iSCSI...
[   16.024081] localhost kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   16.050631] localhost kernel: Loading iSCSI transport class v2.0-870.
[   16.075378] localhost kernel: iscsi: registered transport (tcp)
[   16.097019] localhost kernel: alua: device handler registered
[   16.118238] localhost kernel: emc: device handler registered
[   16.145657] localhost iscsid[396]: iSCSI logger with pid=411 started!
[   16.145933] localhost systemd[1]: iscsid.service: Failed to read PID from file
/var/run/iscsid.pid: Invalid argument
[   16.148003] localhost iscsid[411]: iSCSI daemon with pid=412 started!
[   16.148633] localhost iscsid[411]: can't open InitiatorName configuration file
/etc/iscsi/initiatorname.iscsi
[   16.149046] localhost iscsid[411]: Warning: InitiatorName file
/etc/iscsi/initiatorname.iscsi does not exist or does not contain a properly formatted
InitiatorName. If using software iscsi (iscsi_tcp or ib_iser) or partial offload (bnx2i or
cxgbi iscsi), you may not be able to log into or
[   16.149406] localhost iscsid[411]: can't open InitiatorAlias configuration file
/etc/iscsi/initiatorname.iscsi
[   16.149751] localhost iscsid[411]: can't open iscsid.safe_logout configuration file
/etc/iscsi/iscsid.conf
[   16.139458] localhost kernel: hp_sw: device handler registered
[   16.163507] localhost kernel: rdac: device handler registered
[   16.230086] localhost systemd[1]: Started Open-iSCSI.
[   16.243145] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.250189] localhost kernel: audit: type=1130 audit(1520175090.802:7): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.567092] localhost kernel: raid6: altivecx1 gen()  2521 MB/s
[   16.757084] localhost kernel: raid6: altivecx2 gen()  3197 MB/s
[   16.947082] localhost kernel: raid6: altivecx4 gen()  3339 MB/s
[   17.137099] localhost kernel: raid6: altivecx8 gen()  2462 MB/s
[   17.327114] localhost kernel: raid6: int64x1  gen()  1135 MB/s
[   17.517140] localhost kernel: raid6: int64x1  xor()   161 MB/s
[   17.707089] localhost kernel: raid6: int64x2  gen()  1648 MB/s
[   17.897182] localhost kernel: raid6: int64x2  xor()   199 MB/s
[   18.087102] localhost kernel: raid6: int64x4  gen()  1743 MB/s
[   18.277083] localhost kernel: raid6: int64x4  xor()   443 MB/s
[   18.467084] localhost kernel: raid6: int64x8  gen()  1158 MB/s
[   18.657090] localhost kernel: raid6: int64x8  xor()   435 MB/s
[   18.679813] localhost kernel: raid6: using algorithm altivecx4 gen() 3339 MB/s
[   18.702700] localhost kernel: raid6: using intx1 recovery algorithm
[   18.728406] localhost kernel: xor: measuring software checksum speed
[   18.837079] localhost kernel:    8regs     :  4800.000 MB/sec
[   18.947077] localhost kernel:    8regs_prefetch:  5388.800 MB/sec
[   19.057072] localhost kernel:    32regs    :  4697.600 MB/sec
[   19.167077] localhost kernel:    32regs_prefetch:  5920.000 MB/sec
[   19.277073] localhost kernel:    altivec   :  7385.600 MB/sec
[   19.289401] localhost kernel: xor: using function: altivec (7385.600 MB/sec)
[   19.304388] localhost kernel: async_tx: api initialized (async)
[   19.397315] localhost kernel: device-mapper: multipath round-robin: version 1.2.0
loaded
[   19.493161] localhost kernel: RPC: Registered named UNIX socket transport module.
[   19.505605] localhost kernel: RPC: Registered udp transport module.
[   19.517895] localhost kernel: RPC: Registered tcp transport module.
[   19.529987] localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport
module.
[   19.839959] localhost rpc.statd[455]: Version 2.1.1 starting
[   19.876633] localhost rpc.statd[455]: Initializing NSM state
[   19.877698] localhost rpc.statd[455]: Running as root.  chown /var/lib/nfs/statd to
choose different user
[   19.928851] localhost dracut-pre-udev[395]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[   19.947521] localhost dracut-pre-udev[395]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[   19.997032] localhost systemd[1]: Started dracut pre-udev hook.
[   20.012311] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.012555] localhost systemd[1]: Starting udev Kernel Device Manager...
[   20.016073] localhost kernel: audit: type=1130 audit(1520175094.568:8): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   20.247313] localhost systemd[1]: Started udev Kernel Device Manager.
[   20.269738] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.274189] localhost systemd[1]: Starting dracut pre-trigger hook...
[   20.276780] localhost kernel: audit: type=1130 audit(1520175094.829:9): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   20.346774] localhost dracut-pre-trigger[488]: rd.dm=0: removing DM RAID activation
[   20.806912] localhost dracut-pre-trigger[488]: rd.md.imsm=0: no MD RAID for imsm/isw
raids
[   21.044740] localhost dracut-pre-trigger[488]: rd.md.ddf=0: no MD RAID for SNIA ddf
raids
[   21.526312] localhost dracut-pre-trigger[488]: rd.md=0: removing MD RAID activation
[   22.110968] localhost systemd[1]: Started dracut pre-trigger hook.
[   22.145682] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.145914] localhost systemd[1]: Starting udev Coldplug all Devices...
[   22.129378] localhost kernel: audit: type=1130 audit(1520175096.682:10): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   22.438346] localhost systemd[1]: Mounting Kernel Configuration File System...
[   22.468687] localhost systemd[1]: Mounted Kernel Configuration File System.
[   22.721962] localhost kernel: synth uevent: /devices/vio: failed to send uevent
[   22.721972] localhost kernel: vio vio: uevent: failed to send synthetic uevent
[   22.746348] localhost kernel: pps_core: LinuxPPS API ver. 1 registered
[   22.757145] localhost kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti(a)linux.it&gt;
[   22.770911] localhost systemd[1]: Started udev Coldplug all Devices.
[   22.805680] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.808612] localhost systemd[1]: Starting dracut initqueue hook...
[   22.781191] localhost kernel: audit: type=1130 audit(1520175097.334:11): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[   22.783854] localhost kernel: PTP clock support registered
[   22.851416] localhost systemd[1]: Reached target System Initialization.
[   22.834387] localhost kernel: pmac_zilog: 0.6 (Benjamin Herrenschmidt
<benh(a)kernel.crashing.org>)
[   22.834580] localhost kernel: 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[   22.860586] localhost kernel: tg3.c:v3.137 (May 11, 2014)
[   22.879567] localhost systemd[1]: Listening on Open-iSCSI iscsiuio Socket.
[   22.914448] localhost systemd[1]: Reached target Sockets.
[   22.899133] localhost kernel: 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[   22.931408] localhost systemd[1]: Reached target Basic System.
[   22.957022] localhost kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[   22.960456] localhost kernel: sata_svw 0001:03:0c.0: version 2.3
[   22.960544] localhost kernel: sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu
[   22.981359] localhost kernel: scsi host1: sata_svw
[   23.036976] localhost kernel: tg3 0001:05:04.0: Using 32-bit DMA via iommu
[   23.052869] localhost kernel: scsi host2: sata_svw
[   23.093316] localhost kernel: tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003]
(PCIX:133MHz:64-bit) MAC address 00:14:51:68:33:0e
[   23.104106] localhost kernel: tg3 0001:05:04.0 eth0: attached PHY is 5780
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   23.115051] localhost kernel: tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[   23.126040] localhost kernel: tg3 0001:05:04.0 eth0: dma_rwctrl[76144000]
dma_mask[40-bit]
[   23.150928] localhost kernel: scsi host3: sata_svw
[   23.183030] localhost kernel: scsi host4: sata_svw
[   23.197278] localhost systemd-udevd[576]: link_config: autonegotiation is unset or
enabled, the speed and duplex are not writable.
[   23.207127] localhost kernel: scsi host5: usb-storage 1-2:1.0
[   23.207221] localhost kernel: ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port
0xfa402000 irq 18
[   23.207225] localhost kernel: ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port
0xfa402100 irq 18
[   23.207228] localhost kernel: ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port
0xfa402200 irq 18
[   23.207231] localhost kernel: ata5: SATA max UDMA/133 mmio m8192@0xfa402000 port
0xfa402300 irq 18
[   23.244082] localhost kernel: tg3 0001:05:04.1: Using 32-bit DMA via iommu
[   23.244593] localhost kernel: tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003]
(PCIX:133MHz:64-bit) MAC address 00:14:51:68:33:0f
[   23.244597] localhost kernel: tg3 0001:05:04.1 eth1: attached PHY is 5780
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   23.244600] localhost kernel: tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[   23.244603] localhost kernel: tg3 0001:05:04.1 eth1: dma_rwctrl[76144000]
dma_mask[40-bit]
[   23.322832] localhost kernel: firewire_ohci 0001:03:0e.0: enabling device (0000 ->
0002)
[   23.338907] localhost kernel: usbcore: registered new interface driver usb-storage
[   23.354297] localhost kernel: usbcore: registered new interface driver uas
[   23.384628] localhost systemd-udevd[577]: link_config: autonegotiation is unset or
enabled, the speed and duplex are not writable.
[   23.392024] localhost kernel: tg3 0001:05:04.0 enP1p5s4f0: renamed from eth0
[   23.408052] localhost kernel: firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[   23.471126] localhost systemd-udevd[576]: link_config: autonegotiation is unset or
enabled, the speed and duplex are not writable.
[   23.479324] localhost kernel: tg3 0001:05:04.1 enP1p5s4f1: renamed from eth1
[   23.638680] localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   23.657103] localhost kernel: ata2.00: ATA-7: WDC WD1600JS-41MVB1, 10.02E01, max
UDMA/133
[   23.669173] localhost kernel: ata2.00: 312581808 sectors, multi 0: LBA48
[   23.699475] localhost systemd[1]: Reloading.
[   23.709579] localhost kernel: ata2.00: configured for UDMA/133
[   23.721766] localhost kernel: scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600JS-41M
2E01 PQ: 0 ANSI: 5
[   23.827691] localhost kernel: sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160
GB/149 GiB)
[   23.840102] localhost kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
[   23.857418] localhost kernel: sd 1:0:0:0: [sda] Write Protect is off
[   23.868976] localhost kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.877207] localhost kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   23.908171] localhost kernel:  sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17
[   23.927389] localhost kernel: firewire_core 0001:03:0e.0: created device fw0: GUID
001451fffe356878, S800
[   23.939743] localhost kernel: sd 1:0:0:0: [sda] Attached SCSI disk
[   23.957153] localhost kernel: firewire_core 0001:03:0e.0: phy config: new root=ffc1,
gap_count=5
[   24.198655] localhost kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   24.237488] localhost kernel: ata3.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[   24.248668] localhost kernel: ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth
0/32)
[   24.317591] localhost kernel: ata3.00: configured for UDMA/133
[   24.328724] localhost kernel: scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C 
0-41 PQ: 0 ANSI: 5
[   24.399619] localhost kernel: scsi 5:0:0:0: Direct-Access     Generic  Flash Disk      
8.07 PQ: 0 ANSI: 4
[   24.427506] localhost kernel: sd 5:0:0:0: Attached scsi generic sg2 type 0
[   24.427695] localhost kernel: sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250
GB/233 GiB)
[   24.427719] localhost kernel: sd 2:0:0:0: [sdc] Write Protect is off
[   24.427723] localhost kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   24.427761] localhost kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   24.428940] localhost kernel: sd 5:0:0:0: [sdb] 7886848 512-byte logical blocks: (4.04
GB/3.76 GiB)
[   24.430061] localhost kernel: sd 5:0:0:0: [sdb] Write Protect is off
[   24.430064] localhost kernel: sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   24.431190] localhost kernel: sd 5:0:0:0: [sdb] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[   24.439716] localhost kernel:  sdb: sdb1
[   24.443191] localhost kernel: sd 5:0:0:0: [sdb] Attached SCSI removable disk
[   24.523928] localhost kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0
[   24.535691] localhost kernel:  sdc: sdc1 sdc4
[   24.568942] localhost kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
[   24.927731] localhost multipath[661]: sdb: can't store path info
[   24.931722] localhost multipathd[170]: sdb: add path (uevent)
[   24.934812] localhost multipathd[170]: uevent trigger error
[   25.667091] localhost kernel: ata4: failed to resume link (SControl 0)
[   25.685135] localhost kernel: ata4: SATA link down (SStatus 0 SControl 0)
[   26.797111] localhost kernel: ata5: failed to resume link (SControl 0)
[   26.814882] localhost kernel: ata5: SATA link down (SStatus 0 SControl 0)
[   27.413110] localhost multipathd[170]: sdc: add path (uevent)
[   28.764936] localhost multipathd[170]: sda: add path (uevent)
[   63.822795] localhost kernel: random: crng init done
[  338.538900] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  340.109550] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  341.399165] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  342.669012] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  343.928989] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  345.169000] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  346.449000] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  347.739033] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  348.998843] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  350.279000] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  351.579075] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  352.838940] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  354.109532] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  355.428883] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  356.718822] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  358.018923] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  359.329365] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  360.609119] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  361.908995] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  363.218984] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  364.528879] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  365.839550] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  367.149680] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  368.469682] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  369.789504] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  371.098889] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  372.409268] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  373.718740] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  375.009017] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  376.308824] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  377.608895] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  378.928851] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  380.218903] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  381.529589] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  382.849458] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  384.149727] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  385.449487] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  386.758823] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  388.049527] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  389.318673] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  390.588872] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  391.859233] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  393.098930] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  394.359085] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  395.629084] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  396.898958] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  398.168870] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  399.439045] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  400.729485] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  401.978813] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  403.228975] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  404.478930] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  405.728742] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  407.029348] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  408.298718] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  409.609294] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  410.878960] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  412.179772] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  413.458908] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  414.728851] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  415.998804] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  417.308997] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  418.608813] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  419.898899] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  421.209149] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  422.519111] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  423.829491] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  425.139248] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  426.448862] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  427.759196] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  429.068784] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  430.358662] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  431.649555] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  432.959570] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  434.248803] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  435.548892] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  436.838780] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  438.148893] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  439.439064] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  440.698777] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  442.009568] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  443.298896] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  444.588968] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  445.858982] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  447.128745] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  448.398960] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  449.708831] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  450.999024] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  452.268883] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  453.529398] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  454.818784] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  456.109758] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  457.419203] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  458.728938] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  459.998964] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  461.288822] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  462.599138] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  463.888791] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  465.159083] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  466.469617] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  467.738752] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  469.028940] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  470.319454] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  471.588831] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  472.898879] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  474.208876] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  475.459138] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  476.768977] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  478.038906] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  479.328934] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  480.639690] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  481.898759] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  483.158809] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  484.469496] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  485.719064] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  487.028954] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  488.298878] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  489.558905] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  490.838915] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  492.139517] localhost dracut-initqueue[586]: Warning: dracut-initqueue timeout -
starting timeout scripts
[  492.145576] localhost dracut-initqueue[586]: Warning: Could not boot.
[  492.151641] localhost dracut-initqueue[586]: Warning: /dev/root does not exist
[  492.393430] localhost systemd[1]: Starting Setup Virtual Console...
[  492.617903] localhost systemd[1]: Started Setup Virtual Console.
[  492.624996] localhost audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  492.625222] localhost systemd[1]: Starting Dracut Emergency Shell...
[  492.625819] localhost audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295
subj=kernel msg='unit=systemd-vconsole-setup comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  492.627476] localhost kernel: audit: type=1130 audit(1520175567.180:12): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[  492.632864] localhost kernel: audit: type=1131 audit(1520175567.180:13): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'

---
Rondan Rino
Certificado en LPIC-3
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA 


Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar
http://counter.li.org  Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!! 
^^^Transcripcion de la epoca ^^^



>  On Mar 4, 2018, at 11:56, Rino Rondan <villadalmine(a)gmail.com&gt;
> wrote:
>  
>  I tried booting from here in fedora27 net install ppc64
>   boot ud:,\boot\grub\powerpc-ieee1275\core.elf
>  
>  Load everything, but hang after detect disk in random: crng init done 
>  Do I need to add some parameter in grub.cfg to avoid that ?
>  
>  ---
>  Rondan Rino
>  Certificado en LPIC-3
>  LPI ID:LPI000209832
>  Verification Code:gbblvwyfxu
>  Red Hat Certified Engineer -- RHCE -- RHCVA 
>  
>  
>  Blog:http://www.itrestauracion.com.ar <http://www.itrestauracion.com.ar/>
>  Cv: http://cv.rinorondan.com.ar <http://cv.rinorondan.com.ar/>
>  http://counter.li.org <http://counter.li.org/>  Linux User -> #517918
>  Viva La Santa Federacion!!
>  Mueran Los Salvages Unitarios!! 
>  ^^^Transcripcion de la epoca ^^^
>  
>  
>  
> > On Mar 4, 2018, at 09:54, Rino Rondan <rrondan(a)itrestauracion.com.ar
> <mailto:[e-mail]>> wrote:
> > 
> > I found !! sorry
> > 
> > 
> > ​\-\-\-
> > 
> > Rondan Rino
> > 
> > Certificado en LPIC-3 
> > 
> > LPI ID:LPI000209832
> > 
> > Verification Code:gbblvwyfxu
> > 
> > Red Hat Certified Engineer -- RHCE -- RHCVA
> > 
> > Phone: [phone]
> > 
> > Blog:http://www.itrestauracion.com.ar <http://www.itrestauracion.com.ar/>
> > 
> > Cv: http://cv.rinorondan.com.ar <http://cv.rinorondan.com.ar/>
> > 
> > http://counter.li.org <http://counter.li.org/>  Linux User -> #517918
> > 
> > Viva La Santa Federacion!!
> > 
> > Mueran Los Salvages Unitarios!!
> > 
> > ^^^Transcripcion de la epoca ^^^
> > 
> > Sent from ProtonMail, encrypted email based in Switzerland.​
> > 
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > 
> > On March 4, 2018 9:51 AM, Rino Rondan <rrondan(a)itrestauracion.com.ar
> <mailto:[e-mail]>> wrote:
> > 
> >> ​​
> >> 
> >> Hi,
> >> 
> >> Where I can download the ppc64 f18, I can not find in
> http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
> <http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/>
> >> 
> >> Regards
> >> 
> >> \-\-\-
> >> 
> >> Rondan Rino
> >> 
> >> Certificado en LPIC-3 
> >> 
> >> LPI ID:LPI000209832
> >> 
> >> Verification Code:gbblvwyfxu
> >> 
> >> Red Hat Certified Engineer -- RHCE -- RHCVA
> >> 
> >> Phone: [phone]
> >> 
> >> Blog:http://www.itrestauracion.com.ar <http://www.itrestauracion.com.ar/>
> >> 
> >> Cv: http://cv.rinorondan.com.ar <http://cv.rinorondan.com.ar/>
> >> 
> >> http://counter.li.org <http://counter.li.org/>  Linux User -> #517918
> >> 
> >> Viva La Santa Federacion!!
> >> 
> >> Mueran Los Salvages Unitarios!!
> >> 
> >> ^^^Transcripcion de la epoca ^^^
> >> 
> >> Sent from ProtonMail, encrypted email based in Switzerland.
> >> 
> >> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> >> 
> >> On March 4, 2018 9:39 AM, Rino Rondan rrondan(a)itrestauracion.com.ar
> <mailto:[e-mail]> wrote:
> >> 
> >>> Hi, Thanks for the info!!
> >>> 
> >>> Can I update from fedora18 to fedora 27¿? I did only one upgrade from one
> distro release to another, no jumping 18 to 27? How did you do it ? And what kind of boot
> loader uses , because im doing dd of iso image in a pen drive, but I do not know how to
> boot in OpenFirmware, It worked me in other distros with yaboot and ofwboot or other
> binaries, but not with Fedora.
> >>> 
> >>> Also, I want Xorg running to use as desktop to replace my old intel arch.
> >>> 
> >>> I will test your recommendation!!
> >>> 
> >>> Regards
> >>> 
> >>> \-\-\-
> >>> 
> >>> Rondan Rino
> >>> 
> >>> Certificado en LPIC-3
> >>> 
> >>> LPI ID:LPI000209832
> >>> 
> >>> Verification Code:gbblvwyfxu
> >>> 
> >>> Red Hat Certified Engineer -- RHCE -- RHCVA
> >>> 
> >>> Phone: [phone]
> >>> 
> >>> Blog:http://www.itrestauracion.com.ar
> <http://www.itrestauracion.com.ar/>
> >>> 
> >>> Cv: http://cv.rinorondan.com.ar <http://cv.rinorondan.com.ar/>
> >>> 
> >>> http://counter.li.org <http://counter.li.org/>  Linux User ->
> #517918
> >>> 
> >>> Viva La Santa Federacion!!
> >>> 
> >>> Mueran Los Salvages Unitarios!!
> >>> 
> >>> ^^^Transcripcion de la epoca ^^^
> >>> 
> >>> Sent from ProtonMail, encrypted email based in Switzerland.
> >>> 
> >>> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> >>> 
> >>> On March 4, 2018 7:43 AM, Laurent Vivier laurent(a)vivier.eu
> <mailto:[e-mail]> wrote:
> >>> 
> >>>> Le 04/03/2018 à 03:00, Rino Rondan a écrit :
> >>>> 
> >>>>> Hi,
> >>>>> 
> >>>>> Im trying to install Fedora 27 in my PowerPc but I can not boot it, I
> tested ubuntu and booted ok with yaboot, also tested openbsd and freebsd with openfirwmare
> boot. I saw this link https://github.com/masterzorag/G5_ppc64-linux
> <https://github.com/masterzorag/G5_ppc64-linux> but I can not replicate it or I did
> not understand why so many steps and why iso will not work for him.
> >>>>> 
> >>>>> I have problem with Nvidia driver in all tested distros... Any
> experience or recomendation ? Im user of Fedora about more than 8 years but I see for
> ppc64 some distros have less packages than others...
> >>>> 
> >>>> I have two PowerMac G5 running Fedora 27, but the only way to install it
> >>>> 
> >>>> is to install Fedora 18 and upgrade until Fedora 27. If I remember
> >>>> 
> >>>> correctly installer after F18 are broken. The problem with
> "nouveau"
> >>>> 
> >>>> driver should be fixed since kernel 4.3 with:
> >>>> 
> >>>> 25d295882a1a drm/nouveau/bios: fix OF loading
> >>>> 
> >>>> I have a small VGA LCD plugged on my Pmacs and I use this kernel cmdline
> >>>> 
> >>>> parameter:
> >>>> 
> >>>> video=DVI-I-1:640x480@60
> >>>> 
> >>>> But I never starts desktop session, only a console.
> >>>> 
> >>>> Thanks,
> >>>> 
> >>>> Laurent
> >> 
> >> ppc mailing list -- ppc(a)lists.fedoraproject.org
> <mailto:[e-mail]>
> >> 
> >> To unsubscribe send an email to ppc-leave(a)lists.fedoraproject.org
> <mailto:[e-mail]>
> > _______________________________________________
> > ppc mailing list -- ppc(a)lists.fedoraproject.org
> <mailto:[e-mail]>
> > To unsubscribe send an email to ppc-leave(a)lists.fedoraproject.org
> <mailto:[e-mail]>
>

[Laurent Vivier]

Le 04/03/2018 à 13:51, Rino Rondan a écrit :
>  Hi,
>  
>  Where I can download the ppc64 f18, I can not find in
> http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
>   
I generally use:

https://admin.fedoraproject.org/mirrormanager/

Thanks,
Laurent

[Laurent Vivier]

Le 04/03/2018 à 16:51, Laurent Vivier a écrit :
>  Le 04/03/2018 à 13:51, Rino Rondan a écrit :
> > Hi,
> >
> > Where I can download the ppc64 f18, I can not find in
> http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/18/
> >
>  
>  I generally use:
>  
>  https://admin.fedoraproject.org/mirrormanager/ 
and for F18:

http://archives.fedoraproject.org/pub/archive/fedora-secondary/


Thanks,
Laurent

[Laurent Vivier]

Le 04/03/2018 à 15:56, Rino Rondan a écrit :
>  I tried booting from here in fedora27 net install ppc64
>   boot ud:,\boot\grub\powerpc-ieee1275\core.elf
>  
>  Load everything, but hang after detect disk in random: crng init done 
>  Do I need to add some parameter in grub.cfg to avoid that ?
>   
I think GRUB in F18 doesn't support PowerMac.
You should use yaboot instead.

boot ud:,\ppc\chrp\yaboot

Thanks,
Laurent

[Rino Rondan]

		Ahh you mean copy files for yaboot of f18 in F27 image ? 
		
		

		---Rondan RinoCertificado en LPIC-3LPI ID:LPI000209832Verification Code:gbblvwyfxuRed
Hat Certified Engineer -- RHCE -- RHCVA 

Blog:http://www.itrestauracion.com.arCv: http://cv.rinorondan.com.arhttp://counter.li.org
Linux User -> #517918Viva La Santa Federacion!!Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
	





On Sun, Mar 4, 2018 at 1:02 PM -0300, "Laurent Vivier" <laurent(a)vivier.eu&gt;
wrote:










Le 04/03/2018 à 15:56, Rino Rondan a écrit :
>  I tried booting from here in fedora27 net install ppc64
>   boot ud:,\boot\grub\powerpc-ieee1275\core.elf
>  
>  Load everything, but hang after detect disk in random: crng init done 
>  Do I need to add some parameter in grub.cfg to avoid that ?
>   
I think GRUB in F18 doesn't support PowerMac.
You should use yaboot instead.

boot ud:,\ppc\chrp\yaboot

Thanks,
Laurent

[Laurent Vivier]

Le 04/03/2018 à 18:17, Rino Rondan a écrit :
>  Ahh you mean copy files for yaboot of f18 in F27 image ?  
No, booting F18 CD using yaboot instead of grub.

Then, you install F18 with yaboot bootloader, and upgrade to F26 (step
by step F19 -> F20 -> ... -> F27), and at this tage you can switch the
bootloader to GRUB.

Thanks,
Laurent

[Rino Rondan]

Ahhh!! I will check because  I did not found yaboot file in f18 iso, but i get you!!
Thanks!!!

---
Rondan Rino
[Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification)

LPI ID:LPI000209832
Verification Code:gbblvwyfxu
[Red Hat Certified Engineer -- RHCE --
RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-17...

Phone:[phone]

Blog:[http://www.itrestauracion.com.ar](http://www.itrestauracion.com.ar/)
Cv:[ http://cv.rinorondan.com.ar](http://www.rinorondan.com.ar/)
[http://counter.li.org](http://counter.li.org/)  Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^

Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.

Sent from ProtonMail Mobile

On Sun, Mar 4, 2018 at 2:20 PM, Laurent Vivier <laurent(a)vivier.eu&gt; wrote:

> Le 04/03/2018 à 18:17, Rino Rondan a écrit : > Ahh you mean copy files for yaboot
of f18 in F27 image ?  No, booting F18 CD using yaboot instead of grub. Then, you install
F18 with yaboot bootloader, and upgrade to F26 (step by step F19 -> F20 -> ... ->
F27), and at this tage you can switch the bootloader to GRUB. Thanks, Laurent

[Rino Rondan]

HI, I checked again, create the disk
in openfirmware
dd if=Fedora-18-ppc64-netinst.iso of=/dev/disk2 bs=1m conv=sync
boot ud:,\ppc\chrp\yaboot
then appear
boot ud:,\ppc\chrp\yaboot load-size=4077c adler32=c211ccd2
Loading ELF

$SETENV: invalid number

ok
prompt

I did several test in openfirmware maybe I have to reset some config ??

---
Rondan Rino
[Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification)
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
[Red Hat Certified Engineer -- RHCE --
RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-17...

Phone:[phone]

Blog:[http://www.itrestauracion.com.ar](http://www.itrestauracion.com.ar/)
Cv:[ http://cv.rinorondan.com.ar](http://www.rinorondan.com.ar/)
[http://counter.li.org](http://counter.li.org/)  Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^

Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On March 4, 2018 3:43 PM, Rino Rondan <rrondan(a)itrestauracion.com.ar&gt; wrote:

> Ahhh!! I will check because  I did not found yaboot file in f18 iso, but i get you!!
> Thanks!!!
>
> ---
> Rondan Rino
> [Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification)
> LPI ID:LPI000209832
> Verification Code:gbblvwyfxu
> [Red Hat Certified Engineer -- RHCE --
RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-17...
>
> Phone:[phone]
>
> Blog:[http://www.itrestauracion.com.ar](http://www.itrestauracion.com.ar/)
> Cv:[ http://cv.rinorondan.com.ar](http://www.rinorondan.com.ar/)
> [http://counter.li.org](http://counter.li.org/)  Linux User -> #517918
> Viva La Santa Federacion!!
> Mueran Los Salvages Unitarios!!
> ^^^Transcripcion de la epoca ^^^
>
> Sent from [ProtonMail](https://protonmail.ch), encrypted email based in Switzerland.
>
> Sent from ProtonMail Mobile
>
> On Sun, Mar 4, 2018 at 2:20 PM, Laurent Vivier <laurent(a)vivier.eu&gt; wrote:
>
>> Le 04/03/2018 à 18:17, Rino Rondan a écrit : > Ahh you mean copy files for
yaboot of f18 in F27 image ?  No, booting F18 CD using yaboot instead of grub. Then, you
install F18 with yaboot bootloader, and upgrade to F26 (step by step F19 -> F20 ->
... -> F27), and at this tage you can switch the bootloader to GRUB. Thanks, Laurent

[Laurent Vivier]

Le 04/03/2018 à 21:36, Rino Rondan a écrit :
>  HI, I checked again, create the disk 
>  in openfirmware
>  dd if=Fedora-18-ppc64-netinst.iso of=/dev/disk2 bs=1m conv=sync
>  boot ud:,\ppc\chrp\yaboot
>  then appear
>  boot ud:,\ppc\chrp\yaboot load-size=4077c adler32=c211ccd2
>  Loading ELF
>  
>  $SETENV: invalid number
>  
>  ok
>  prompt
>  
Did you try "boot ud:,\\:tbxi"?

Thanks,
Laurent

[rino]

Thanks!! i will test...
I can do dir ud:,\ the info is there, i do not know what is tbxi but i will
try!

Thanks!

---
Rondan Rino
Certificado en LPIC-3 <http://lpi.org/v/LPI000209832/ay4xrhq48m>
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
Red Hat Certified Engineer -- RHCE -- RHCVA
<https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658>


Blog:http://www.itrestauracion.com.ar
Cv: http://cv.rinorondan.com.ar <http://www.rinorondan.com.ar/>
http://counter.li.org  Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^




On Mon, Mar 5, 2018 at 11:26 AM, Laurent Vivier <laurent(a)vivier.eu&gt; wrote:

>  Le 04/03/2018 à 21:36, Rino Rondan a écrit :
>  > HI, I checked again, create the disk
>  > in openfirmware
>  > dd if=Fedora-18-ppc64-netinst.iso of=/dev/disk2 bs=1m conv=sync
>  > boot ud:,\ppc\chrp\yaboot
>  > then appear
>  > boot ud:,\ppc\chrp\yaboot load-size=4077c adler32=c211ccd2
>  > Loading ELF
>  >
>  > $SETENV: invalid number
>  >
>  > ok
>  > prompt
>  >
>
>  Did you try "boot ud:,\\:tbxi"?
>
>  Thanks,
>  Laurent
>
>