Aracele escreveu:
Galera eu tentei.......
mas tá difícil para uma usuária básica....
estou colocando um passo a passo para alguém fazer o favor de
complementar (eu sei que é pedir de mais J)
Né não.
Eu já fiquei muito mais tempo perturbando a lista com meus
problemas :-)
Vai ajudar bastante!!!!
caso esteja faltando algo adicione o mais claro possivel
Agradacida
{As dificuldades são todas eu nunca usei fedora eu usada o debian }
tudo começou assim:
[root@localhost ~]# adsl-setup
Welcome to the ADSL client setup. First, I will run some checks on
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): ??????
Você tem um provedor, não tem? Esse é o nome da sua conta.
Se não tem provedor, o Velox não vai funcionar (nem no
Linux nem no Ruindows)
INTERFACE
Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): ?????????
Aceite o default.
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no): ??????????
Tanto faz, mas deixa "no" mesmo.
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: ?????????
Depende do seu provedor. Na dúvida, bota "server".
Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
Enter the secondary DNS server address here: ????????????
Press enter.
PASSWORD
Please enter your Password: ????
Please re-enter your Password: ??????
Você tem conta em algum provedor, não tem? Essa conta tem uma
senha. É essa que você vai entrar aqui.
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): ?????????
yes.
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are
responsible
for ensuring the security of your machine. You are
STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing
workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet
gateway
for a LAN
Choose a type of firewall (0-2): ????????
1
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):?????????
Eu boto "no", porque eu quero o boot o mais rápido possível.
Mas não teria problema colocar "yes".
Deve ser isso.
Alberto Monteiro