On 08/06/11 16:42, Trever L. Adams wrote:
Would you care to share some documentation of some kind?
<network>
<name>TheCommons</name>
<uuid>....</uuid>
<forward mode='route'/>
<bridge name='virbr0' stp='off' delay='0' />
<ip address='10.0.1.1' netmask='255.255.255.0'>
</ip>
<ip family='ipv6' address='fd00:xxxx:xxxx:1::1'
prefix='64'>
</ip>
<ip family='ipv6' address='2001:xxxx:xxxx:0::1'
prefix='64'>
</ip>
</network>
That didn't automatically add any of the ipv6 addresses. As I said, no
radvd. If I read the bug reports correctly, it is supposed to be automagic.
Ah that's a virtual bridge between your VMs. I'm bridging my VMs to br0
which is a bridge that includes the host's ethernet interface so that
the guests have direct access to the local LAN and can see the radvd
that is running on our gateway router.
Tom
--
Tom Hughes (tom(a)compton.nu)
http://compton.nu/