Samsung USB floppy

[Jos Vos]

Hi,

I have tried a new Samsung USB floppy drive with RH 8 and RH 9 and
it is not working: when I access it (e.g., reading I do with
dd if=/dev/sda) the floppy starts rotating, but at the end it says
that it cannot open /dev/sda.  This is what I get when plugging
in the drive with a preformatted floppy in it:

Sep  4 19:57:09 cherry kernel: hub.c: new USB device 00:0e.2-1, assigned address 6
Sep  4 19:57:12 cherry /etc/hotplug/usb.agent: Setup usb-storage for USB product 55d/2020/210
Sep  4 19:57:17 cherry kernel: Device not ready.  Make sure there is a disc in the drive.
Sep  4 19:57:17 cherry kernel: sda : READ CAPACITY failed.
Sep  4 19:57:17 cherry kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Sep  4 19:57:17 cherry kernel: Current sd00:00: sense key Not Ready
Sep  4 19:57:17 cherry kernel: Additional sense indicates Medium not present
Sep  4 19:57:17 cherry kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Sep  4 19:57:17 cherry kernel:  sda: I/O error: dev 08:00, sector 0
Sep  4 19:57:17 cherry kernel:  I/O error: dev 08:00, sector 0
Sep  4 19:57:17 cherry kernel:  unable to read partition table
Sep  4 19:57:17 cherry devlabel: devlabel service started/restarted

Is there anything I do wrong or is my drive just defect?

Thanks,

--
--    Jos Vos 
--    X/OS Experts in Open Systems BV   |   Phone: [phone]
--    Amsterdam, The Netherlands        |     Fax: [phone]