Re: F35 no USB after today's updates

[Jason Montleon]

I have a similar system. lspci out looks near identical. The system was 
just booted this morning.

I normally run it headless with just power and network connected, but 
plugging in a USB mouse, thumb drive, and USB optical drive, they show 
up fine in dmesg and lsusb output using random USB ports on the front 
and back, as does the card reader on the front of the system. I mounted 
the thumb drive fine.

# dmidecode | grep -i Precision && uname -srvpi && lspci | grep USB
	Product Name: Precision Tower 7810
Linux 5.14.16-301.fc35.x86_64 #1 SMP Wed Nov 3 13:55:42 UTC 2021 x86_64 
x86_64
00:14.0 USB controller: Intel Corporation C610/X99 series chipset USB 
xHCI Host Controller (rev 05)
00:1a.0 USB controller: Intel Corporation C610/X99 series chipset USB 
Enhanced Host Controller #2 (rev 05)
00:1d.0 USB controller: Intel Corporation C610/X99 series chipset USB 
Enhanced Host Controller #1 (rev 05)


On 11/8/21 08:15, Sergio Pascual wrote:
>  
>  El lun, 8 nov 2021 a las 13:39, Stephen John Smoogen (<smooge(a)gmail.com 
>  <mailto:[e-mail]>>) escribió:
>  
>      On Mon, 8 Nov 2021 at 06:53, Sergio Pascual <sergio.pasra(a)gmail.com
>      <mailto:[e-mail]>> wrote:
>       >
>       > Hi, I upgraded my workstation to F35 last Friday, and today I
>      'dnf updated' and rebooted. After the reboot, all my USBs are
>      disabled. No mouse, no keyword.
>       > I know my hardware works because the keyboard works in grub, and
>      the light of my optical mouse in on until some errors appear in the
>      kernel during boot.
>       >
>       > I have tried:
>       > kernel-5.14.15-200.fc34.x86_64
>       > kernel-5.14.15-300.fc35.x86_64
>       > kernel-5.14.16-301.fc35.x86_64
>       >
>  
>      The developers will need to know what the exact motherboard/laptop
>      version and manufacturer you have in order to diagnose this issue. My
>      initial guess is that since the f34 kernel also fails, that the
>      problem is with a firmware module and whatever the motherboard is
>      expecting to use. [The fact that it is only finding USB2 says that
>      either the system is really old or that it is trying to fail to its
>      lowest working value.]
>  
>  
>  
>  
>  My workstation is a Dell Precision Tower 7910.
>  
>  lscpi says I have the following serial bus controllers
>  
>  00:14.0 USB controller: Intel Corporation C610/X99 series chipset USB 
>  xHCI Host Controller (rev 05)
>  00:1a.0 USB controller: Intel Corporation C610/X99 series chipset USB 
>  Enhanced Host Controller #2 (rev 05)
>  00:1d.0 USB controller: Intel Corporation C610/X99 series chipset USB 
>  Enhanced Host Controller #1 (rev 05)
>  
>  Regards
>  
>  
>       > without success.
>       > I'm getting messages like these:
>       >
>       > [   23.722355] usb 3-10: new high-speed USB device number 7 using
>      xhci_hcd
>       > [   23.857746] usb 3-10: New USB device found, idVendor=0bda,
>      idProduct=0184, bcdDevice=84.13
>       > [   23.857755] usb 3-10: New USB device strings: Mfr=1,
>      Product=2, SerialNumber=3
>       > [   23.857759] usb 3-10: Product: USB2.0-CRW
>       > [   23.857762] usb 3-10: Manufacturer: Generic
>       > [   23.857764] usb 3-10: SerialNumber: 20100818841300000
>       > [   24.016363] usb 3-7.1: new high-speed USB device number 8
>      using xhci_hcd
>       > [   29.648377] usb 3-7.1: device descriptor read/64, error -110
>       > [   45.520400] usb 3-7.1: device descriptor read/64, error -110
>       > [   45.624451] usb 3-7-port1: attempt power cycle
>       > [   45.738358] usb 3-13: new high-speed USB device number 9 using
>      xhci_hcd
>       > [   45.865929] usb 3-13: New USB device found, idVendor=05e3,
>      idProduct=0608, bcdDevice=32.98
>       > [   45.865939] usb 3-13: New USB device strings: Mfr=0,
>      Product=1, SerialNumber=0
>       > [   45.865942] usb 3-13: Product: USB2.0 Hub
>       > [   45.866653] hub 3-13:1.0: USB hub found
>       > [   45.866992] hub 3-13:1.0: 4 ports detected
>       > [   46.304365] usb 3-7.1: new high-speed USB device number 10
>      using xhci_hcd
>       > [   56.160384] xhci_hcd 0000:00:14.0: Abort failed to stop
>      command ring: -110
>       > [   56.160384] xhci_hcd 0000:00:14.0: xHCI host controller not
>      responding, assume dead
>       > [   56.160384] xhci_hcd 0000:00:14.0: HC died; cleaning up
>       > [   56.488455] xhci_hcd 0000:00:14.0: Timeout while waiting for
>      setup device command
>       > [   56.488480] usb 4-2: USB disconnect, device number 2
>       > [   56.904366] usb 3-7.1: device not accepting address 10, error -108
>       > [   56.904412] usb 3-7-port1: couldn't allocate usb_device
>       > [   56.904464] usb usb3-port2: couldn't allocate usb_device
>       > [   56.904502] usb 3-13-port1: couldn't allocate usb_device
>       > [   56.904603] usb 3-3: USB disconnect, device number 2
>       > [   56.927819] usb 3-6: USB disconnect, device number 3
>       >
>       >
>       >
>       > _______________________________________________
>       > devel mailing list -- devel(a)lists.fedoraproject.org
>      <mailto:[e-mail]>
>       > To unsubscribe send an email to
>      devel-leave(a)lists.fedoraproject.org
>      <mailto:[e-mail]>
>       > Fedora Code of Conduct:
>      https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>      <https://docs.fedoraproject.org/en-US/project/code-of-conduct/>
>       > List Guidelines:
>      https://fedoraproject.org/wiki/Mailing_list_guidelines
>      <https://fedoraproject.org/wiki/Mailing_list_guidelines>
>       > List Archives:
>      https://lists.fedoraproject.org/archives/list/[e-mail]
>      <https://lists.fedoraproject.org/archives/list/[e-mail].o...
>       > Do not reply to spam on the list, report it:
>      https://pagure.io/fedora-infrastructure
>      <https://pagure.io/fedora-infrastructure>
>  
>  
>  
>      -- 
>      Stephen J Smoogen.
>      Let us be kind to one another, for most of us are fighting a hard
>      battle. -- Ian MacClaren
>      _______________________________________________
>      devel mailing list -- devel(a)lists.fedoraproject.org
>      <mailto:[e-mail]>
>      To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>      <mailto:[e-mail]>
>      Fedora Code of Conduct:
>      https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>      <https://docs.fedoraproject.org/en-US/project/code-of-conduct/>
>      List Guidelines:
>      https://fedoraproject.org/wiki/Mailing_list_guidelines
>      <https://fedoraproject.org/wiki/Mailing_list_guidelines>
>      List Archives:
>      https://lists.fedoraproject.org/archives/list/[e-mail]
>      <https://lists.fedoraproject.org/archives/list/[e-mail].o...
>      Do not reply to spam on the list, report it:
>      https://pagure.io/fedora-infrastructure
>      <https://pagure.io/fedora-infrastructure>
>  
>  
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail]
>  Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
>