Hello!
Wrote a small patch (attached) for chkconfig (1.3.9) to have a sysv init
list for a runlevel:
Behaviour should not be changed when the additional switches are not
used:
Examples:
Start:
chkconfig --skip-xinetd --priority --show-level 5 --list | sort -k 2 -n
microcode_ctl 0 99 0:off 1:off 2:on 3:on 4:on 5:on 6:off
kudzu 5 95 0:off 1:off 2:off 3:on 4:on 5:on 6:off
ip6tables 8 92 0:off 1:off 2:on 3:on 4:on 5:on 6:off
ipchains 8 92 0:off 1:off 2:on 3:on 4:on 5:on 6:off
iptables 8 92 0:off 1:off 2:on 3:on 4:on 5:on 6:off
isdn 9 91 0:off 1:off 2:on 3:on 4:on 5:on 6:off
network 10 90 0:off 1:off 2:on 3:on 4:on 5:on 6:off
syslog 12 88 0:off 1:off 2:on 3:on 4:on 5:on 6:off
irqbalance 13 87 0:off 1:off 2:off 3:on 4:on 5:on 6:off
...
Kill:
chkconfig --skip-xinetd --priority --show-level 5 --list | sort -k 3 -n
messagebus 97 3 0:off 1:off 2:off 3:on 4:on 5:on 6:off
rhnsd 97 3 0:off 1:off 2:off 3:on 4:on 5:on 6:off
anacron 95 5 0:off 1:off 2:on 3:on 4:on 5:on 6:off
atd 95 5 0:off 1:off 2:off 3:on 4:on 5:on 6:off
....
BTW: shouldn't syslog be before network, isdn and even iptables?
I see cipe output when the network starts on the console but this should
go to syslog, shouldn't it?
Otherwise
CIPE driver vers 1.4.5 (c) Olaf Titz 1996-2000, 100 channels,
is displayed on the console.
So syslog levels should be 6 for start and also 93 for kill.
Old:
# chkconfigorig: 2345 12 88
New:
# chkconfig: 2345 6 93
chkconfig syslog reset
Fedora=FC1
Ciao,
Gerhard