Re: udev 0.75-2 slow?
udev hangs for me too on boot but only for about 10 seconds. What is more
of a problem though is the fact my "eth1" device apparently now is called
"dev18685". Here is what systool has to say about the device:
Class Device = "dev18685"
Class Device path = "/sys/class/net/dev18685"
addr_len = "6"
address = "00:04:61:4a:12:1f"
broadcast = "ff:ff:ff:ff:ff:ff"
features = "0x0"
flags = "0x1002"
ifindex = "2"
iflink = "2"
mtu = "1500"
tx_queue_len = "1000"
type = "1"
uevent = <store method only>
weight = "0"
Device = "0000:00:04.0"
Device path = "/sys/devices/pci0000:00/0000:00:04.0"
class = "0x020000"
config = de 10 66 00 07 00 b0 00 a1 00 00 02 00 00 00 00
00 00 00 ec 01 ec 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 95 16 00 10
00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
device = "0x0066"
irq = "10"
local_cpus = "1"
modalias =
"pci:v000010DEd00000066sv00001695sd00001000bc02sc00i00"
resource = "0x00000000ec000000 0x00000000ec000fff
0x0000000000000200
0x000000000000ec00 0x000000000000ec07 0x0000000000000101
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000"
subsystem_device = "0x1000"
subsystem_vendor = "0x1695"
uevent = <store method only>
vendor = "0x10de"
Regards,
Dennis
Bojan Smojver wrote:
Not sure if this is just my system, but the new version of udev
appears
to be taking a few minutes to do its bit on boot. Did anyone else notice
this kind of behaviour?