Dell E7470 Install: No bootable device found
by Michael B Allen
I just tried to install F24 and everything went smoothly but after
reboot I just get "No bootable devices found".
I've been using Linux as my primary machine since kernel 2.0.35 and my
instinct tells me this looks like the bootloader wasn't installed
correctly.
Is this a known problem?
When I "reclaimed" space my drive looked something like the following:
sda1 Dell Utiility
sda2 Windows Recovery
sda3 Windows OS
So I deleted Windows and reclaimed but I want to leave the Dell
utility and Windows recovery partition.
So how do I install the bootloader in F24 so that it boots sda3?
Is grub still being used?
It's been ~5 years since I last installed Linux so I'm not familiar
with the latest tool chain.
7 years, 5 months
can't shutdown (a stop job is running...)
by Neal Becker
For quite some time now, when I try to reboot (from kde) the shutdown gets
stuck saying "a stop job is running for ...". I just hold the power button.
Any ideas?
7 years, 5 months
How do I restart the Desktop Manager under Fedora 24
by Javier Perez
Hi, I need some help
This is for a home computer
My desktop manager is freezing (XFCE). I can ssh into the system.
But I do not know how to restart the desktop manager.
My google fu is not working. I google by "restart desktop manager fedora
24" but do not get anything remotely useful. Maybe I am not using the magic
incantation words.
Thanks
--
------------------------------
/\_/\
|O O| pepebuho(a)gmail.com
~~~~ Javier Perez
~~~~ While the night runs
~~~~ toward the day...
m m Pepebuho watches
from his high perch.
7 years, 5 months
nc missing option -z
by Suvayu Ali
Hi,
I used to use netcat to check if a particular host is up or if I have
internet connection before I run a few scripts. I would use the -z
option in particular. But now I see that has been removed:
$ nc -z imap.gmail.com 993 && sync-my-email.sh
ncat: invalid option -- 'z'
Here is the excerpt from the old manual page:
-z Specifies that nc should just scan for listening daemons, without
sending any data to them. It is an error to use this option in
conjunction with the -l option.
Any ideas what happened to it? What can I use as replacement?
Thanks for any ideas.
--
Suvayu
Open source is the future. It sets us free.
7 years, 5 months
install.img
by CLOSE Dave
I need a copy of the install.img file for Fedora 20. It doesn't seem to
be present in archives.fedoraproject.org or in the F20 netinstall ISO.
Can anyone point me to a copy?
--
Dave Close
7 years, 5 months
fedpkg --dist f24 local
by arnaud gaboury
I am writing a .spec file to build my own .rpm.
Here it is, non completed:
-----------------------------------------------
Name: mattermost
Version: 3.4
Release: 1%{?dist}
Summary: Mattermost is an open source, self-hosted Slack-alternative
URL: http://www.mattermost.org
Source0: https://github.com/mattermost/platform/archive/master.zip
License: MIT
Group: System Environment/Daemons
BuildRequires: go
BuildRequires: npm
BuildRequires: python
BuildRequires: git
BuildRequires: mercurial
BuildRequires: pngquant
Requires: glibc
%description
As an alternative to proprietary SaaS messaging, Mattermost brings all your
team communication into one p$
%prep
%autosetup -n platform-master
cd %{_builddir}
mkdir -p src/github.com/mattermost
cd src/github.com/mattermost
rm -f platform
ln -s %{_builddir}/platform-master platform
cd platform
sed -n '1,/cp README.md/p;/^run-server:/,$p' -i Makefile
sed -r -i Makefile \
-e 's/^package: build build-client/package: build-linux build-client/' \
-e 's/GOARCH=amd64//' \
-e 's/^BUILD_HASH =.*/BUILD_HASH = none/'
%build
cd %{_builddir}/src/github.com/mattermost/platform
GOPATH=%{_builddir} BUILD_NUMBER=%{version}-%{release} make %{?_smp_mflags}
package
%install
%files
%changelog
---------------------------------------------
Before going further, I want to test, so run:
$ fedpkg --dist f24 local
Everything went fine and was left with the wanted binaries, BUT I have this
error at the very end:
<----BUILD------->
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.92dtaH
+ umask 022
+ cd /home/makerpm/build_package/mattermost
+ '[' /home/makerpm/rpmbuild/BUILDROOT/mattermost-3.4-1.fc24.x86_64 '!=' /
']'
+ rm -rf /home/makerpm/rpmbuild/BUILDROOT/mattermost-3.4-1.fc24.x86_64
++ dirname /home/makerpm/rpmbuild/BUILDROOT/mattermost-3.4-1.fc24.x86_64
+ mkdir -p /home/makerpm/rpmbuild/BUILDROOT
+ mkdir /home/makerpm/rpmbuild/BUILDROOT/mattermost-3.4-1.fc24.x86_64
+ cd platform-master
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id -m --run-dwz
--dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000
/home/makerpm/build_package/mattermost/platform-master
/usr/lib/rpm/sepdebugcrcfix: Updated 0 CRC32s, 0 CRC32s did match.
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-java-repack-jars
Processing files: mattermost-3.4-1.fc24.x86_64
Processing files: mattermost-debuginfo-3.4-1.fc24.x86_64
error: Empty %files file
/home/makerpm/build_package/mattermost/platform-master/debugfiles.list
RPM build errors:
Empty %files file
/home/makerpm/build_package/mattermost/platform-master/debugfiles.list
Could not execute local: Non zero exit
------------------------------------------
My %files section is indeed empty as I did not finished writing the .spec
file.
Shall I overcome for now this error and consider my local build test as
successful ?
7 years, 5 months
KP_end
by Patrick Dupre
Hello,
In fedora 24, I observe a different behavior than under fc22.
I am using a french keyboard (alternative)
The key "page down" generates a KP_End
and the key "page up" generates a KP_Home
while "end" generates a End
and "home" generates a Home
I would have expect a KP_Prior or a KP_Next.
When a make a man
the key "page down" and "end" give the same result: End
the key "page up" and "home" give the same result: Home
It means that I do not have any page up or page down with man.
Also, the numerical pad does not help either because the KP_Prior
does the same as a Home, and KP_Next does a End
Any clue?
Thank
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
7 years, 5 months
rpmbuild
by Patrick Dupre
Hello,
I tried to build my own package perl-PAR-Packer from
Url: http://search.cpan.org/dist/PAR-Packer/
(see rpmfind.net)
I run cpanspec
and then
rpmbuild -bb
and I got the following error message:
RPM build errors:
File not found: /home/pdupre/rpmbuild/BUILDROOT/perl-PAR-Packer-1.035-1.fc24.x86_64/usr/lib64/perl5/vendor_perl/auto/*
File not found: /home/pdupre/rpmbuild/BUILDROOT/perl-PAR-Packer-1.035-1.fc24.x86_64/usr/lib64/perl5/vendor_perl/PAR*
Here is the spec file:
Name: perl-PAR-Packer
Version: 1.035
Release: 1%{?dist}
Summary: PAR Packager
License: GPL+ or Artistic
Group: Development/Libraries
URL: http://search.cpan.org/dist/PAR-Packer/
Source0: http://www.cpan.org/modules/by-module/PAR/PAR-Packer-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: perl >= 1:5.8.1
BuildRequires: perl(Archive::Zip) >= 1.02
BuildRequires: perl(Compress::Zlib) >= 1.30
BuildRequires: perl(Digest)
BuildRequires: perl(Digest::SHA)
BuildRequires: perl(ExtUtils::MakeMaker)
BuildRequires: perl(File::Temp) >= 0.05
BuildRequires: perl(Getopt::ArgvFile) >= 1.07
BuildRequires: perl(IO::Compress::Gzip)
BuildRequires: perl(Module::ScanDeps) >= 1.21
BuildRequires: perl(Module::Signature)
BuildRequires: perl(PAR) >= 1.010
BuildRequires: perl(PAR::Dist) >= 0.22
BuildRequires: perl(Text::ParseWords)
BuildRequires: perl(Tk)
BuildRequires: perl(Tk::ColoredButton)
BuildRequires: perl(Tk::EntryCheck)
BuildRequires: perl(Tk::Getopt)
Requires: perl(Archive::Zip) >= 1.02
Requires: perl(Compress::Zlib) >= 1.30
Requires: perl(Digest)
Requires: perl(Digest::SHA)
Requires: perl(File::Temp) >= 0.05
Requires: perl(Getopt::ArgvFile) >= 1.07
Requires: perl(IO::Compress::Gzip)
Requires: perl(Module::ScanDeps) >= 1.21
Requires: perl(Module::Signature)
Requires: perl(PAR) >= 1.010
Requires: perl(PAR::Dist) >= 0.22
Requires: perl(Text::ParseWords)
Requires: perl(Tk)
Requires: perl(Tk::ColoredButton)
Requires: perl(Tk::EntryCheck)
Requires: perl(Tk::Getopt)
Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
%description
This module implements the App::Packer::Backend interface, for generating
stand-alone executables, perl scripts and PAR files.
%prep
%setup -q -n PAR-Packer-%{version}
%build
%{__perl} Makefile.PL INSTALLDIRS=vendor OPTIMIZE="$RPM_OPT_FLAGS"
make %{?_smp_mflags}
%install
rm -rf $RPM_BUILD_ROOT
make pure_install PERL_INSTALL_ROOT=$RPM_BUILD_ROOT
find $RPM_BUILD_ROOT -type f -name .packlist -exec rm -f {} \;
find $RPM_BUILD_ROOT -type f -name '*.bs' -size 0 -exec rm -f {} \;
find $RPM_BUILD_ROOT -depth -type d -exec rmdir {} 2>/dev/null \;
%{_fixperms} $RPM_BUILD_ROOT/*
%check
make test
%clean
rm -rf $RPM_BUILD_ROOT
%files
%defattr(-,root,root,-)
%doc AUTHORS Changes README
%{perl_vendorarch}/auto/*
%{perl_vendorarch}/PAR*
%{_mandir}/man3/*
%changelog
* Wed Nov 02 2016 Patrick Dupre <pdupre(a)gmx.com> 1.035-1
- Specfile autogenerated by cpanspec 1.78.
Can somebody help me ?
I tried to modify or remove the lines
%{perl_vendorarch}/auto/*
%{perl_vendorarch}/PAR*
but it did not help.
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
7 years, 5 months