users November 2023

users@lists.fedoraproject.org

88 participants
100 discussions

freaking TFTP
by lejeczek 08 Nov '23

08 Nov '23

Hi guys. cannot get a client to get anything from 'in.tftp' server? Connection seems to get established, _tcpdump_ shows: ... 13:13:08.331277 IP 10.3.1.100.35176 > whale.mine.priv.tftp: TFTP, length 19, RRQ "zabbix.zip" octet 13:13:13.331324 IP 10.3.1.100.35176 > whale.mine.priv.tftp: TFTP, length 19, RRQ "zabbix.zip" octet ... journal log for tftp.service, so on the servers, shows: ... tftpd: read(ack): No route to host ... any & all thoughts on how troubleshoot & fix this are much appreciated. many thanks, L.

3 5

NVidia Tesla trouble in both F38 & F39
by Felix Miata 08 Nov '23

08 Nov '23

3 different Tesla cards involved so far: GT210 (not mine) plus G98 and GT218 mine. Without the workaround, screen locks in black except for a few random portions of 80x25 mode characters in upper left. Bad kernels include 6.4.16, 6.5.9 & 6.5.10. OK without workaround: 6.3.12. Which kernels work OK without workaround seem to vary with which NVidia/PC combination. These are slow booting oldsters with no more than 2 CPU threads (here at least). Worse, the G98 is a PCI card, not PCIe. :( <https://www.linuxquestions.org/questions/linux-desktop-74/kernel-6-5-9-gt21…> has the original details. Known workaround so far here is to include vga=791 on kernel cmdline. Not yet tried on Fermis, and not yet tried forced inclusion of nouveau.ko in initrd. From one of 3 PCs involved: # inxi -GSaz --vs --zl --hostname inxi 3.3.31-00 (2023-11-02) System: Host: g5eas Kernel: 6.5.10-300.fc39.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 2.40-13.fc39 clocksource: tsc available: hpet,acpi_pm parameters: ro root=LABEL=<filter> noresume selinux=0 audit=0 ipv6.disable=1 net.ifnames=0 plymouth.enable=0 consoleblank=0 mitigations=off vga=791 Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 7 dm: 1: KDM 2: XDM Distro: Fedora release 39 (Thirty Nine) Graphics: Device-1: NVIDIA G98 [GeForce 8400 GS Rev. 2] vendor: PNY driver: nouveau v: kernel non-free: series: 340.xx status: legacy (EOL~2019-12-xx) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla process: 40-80nm built: 2006-2013 pcie: gen: 1 speed: 2.5 GT/s lanes: 1 link-max: lanes: 16 ports: active: DVI-I-1,VGA-1 empty: none bus-ID: 0b:00.0 chip-ID: 10de:06e4 class-ID: 0300 Display: x11 server: X.Org v: 1.20.14 with: Xwayland v: 23.2.2 compositor: kwin_x11 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0 screens: 1 Screen-1: 0 s-res: 3600x1200 s-dpi: 120 s-size: 762x254mm (30.00x10.00") s-diag: 803mm (31.62") Monitor-1: DVI-I-1 pos: primary,left model: NEC EA243WM serial: <filter> built: 2011 res: 1920x1200 hz: 60 dpi: 94 gamma: 1.2 size: 519x324mm (20.43x12.76") diag: 612mm (24.1") ratio: 16:10 modes: max: 1920x1200 min: 640x480 Monitor-2: VGA-1 pos: right model: Dell P2213 serial: <filter> built: 2012 res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2 size: 473x296mm (18.62x11.65") diag: 558mm (22") ratio: 16:10 modes: max: 1680x1050 min: 720x400 API: EGL v: 1.5 hw: drv: nvidia nouveau platforms: device: 0 egl: 1.4 drv: nouveau device: 1 drv: swrast surfaceless: egl: 1.4 drv: nouveau x11: egl: 1.4 drv: nouveau inactive: gbm,wayland API: OpenGL v: 4.5 compat-v: 3.3 vendor: mesa v: 23.2.1 glx-v: 1.4 direct-render: yes renderer: NV98 device-ID: 10de:06e4 memory: 483.4 MiB unified: no # -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

1 0

Cups shared print now showing in Windows
by ToddAndMargo 07 Nov '23

07 Nov '23

Hi All, Fedora 38 cups-2.4.7-1.fc38.x86_64 cups-lpd-2.4.7-1.fc38.x86_64 My old printer broke, so I had to replace it. I removed the old printer from cups and added the new printer. I set the new printer to network share (and it does over LPD). /etc/printcap: # This file was automatically generated by cupsd(8) from the # /etc/cups/printers.conf file. All changes to this file # will be lost. HLL2300D|HLL2300D:rm=server.acme.local:rp=HLL2300D: Cups-PDF|Cups-PDF:rm=server.acme.local:rp=Cups-PDF: "Cups-PDF" shows in the Windows 10 "add printer" dialog, but my new HLL2300D does not. I have cups-lpd installed, so I just did a manual create port lpd and my new printer works fine from Windows 10. But, why can Windows 10's "Add Printer" dialog find it? Perplexed, -T

2 3

Fedora 39 released
by Jeffrey Walton 07 Nov '23

07 Nov '23

Hi Everyone, Fedora 39 was released today. Instructions for the upgrade are located at <https://docs.fedoraproject.org/en-US/quick-docs/upgrading-fedora-offline/>. Jeff

1 0

F39 Update: Yawn
by Garry T. Williams 07 Nov '23

07 Nov '23

On Tuesday, 7 November 2023 08:56:05 EST Matthew Miller wrote: > Fedora Linux 39 is now officially available. I updated three systems this morning without a hitch: headless server, laptop, and workstation. All Dell hardware. Thank you, Matthew and all of Fedora contributors! -- Garry T. Williams

2 2

Web page doesn't display (Trouble with javascript?)
by Jonathan Ryshpan 07 Nov '23

07 Nov '23

Can anyone display this page: https://eclipse.gsfc.nasa.gov/SEgoogle/SEgoogle2001/SE2024Apr08Tgoogle.html The text claims the page contains a map of the April 2024 eclipse, but no such thing appears on the screen. System Info: Firefox 119.0 (64-bit) Operating System: Fedora Linux 38 KDE Plasma Version: 5.27.8 KDE Frameworks Version: 5.110.0 Qt Version: 5.15.10 Kernel Version: 6.5.9-200.fc38.x86_64 (64-bit) Graphics Platform: X11 Processors: 8 × Intel® Core™ i7-4790K CPU @ 4.00GHz Memory: 15.5 GiB of RAM Graphics Processor: Mesa Intel® HD Graphics 4600 Manufacturer: ASUS -- Sincerely Jonathan Ryshpan <jonrysh(a)pacbell.net> I've learned that you can tell a lot about a person by the way they handle these three things: a rainy day, lost luggage, and tangled Christmas tree lights. --Maya Angelou

5 4

thunderbird: duplicated messages downloaded
by fedora＠eyal.emu.id.au 07 Nov '23

07 Nov '23

[resend from correct email] F38, tb 115.3.2 (64-bit) The server is configured as pop3 with the option to leave the messages on the server. After clicking "Get Messages" I often get no reaction for a while, and click again in a few seconds. In this case, after the new messages are downloaded, a second download starts and the same messages are fetched again. Normally, only new messages are downloaded in this situation (so none on a second download), as it should be. If I download from another client then I will get these messages again, which is OK as each client should know what it already has. I have one "main" client which downloads messages, removing them from the server. When away from the main server, I often collect messages using other clients, leaving the messages on the server. This is when the problem shows. -- Eyal at Home (fedora(a)eyal.emu.id.au)

5 10

Time to replace SSD disk?
by Javier Perez 06 Nov '23

06 Nov '23

Hi. My boot SSD was purchased on May, 2015. It is a Crucial 128GB one. Cockpit is showing me an error of /sys/firmware/efi/efivars 0 free and smartctl is telling me the following: ==== beginning of SMARTCTL INFO ======= === START OF INFORMATION SECTION === Model Family: Crucial/Micron Client SSDs Device Model: Crucial_CT128MX100SSD1 Serial Number: 15030E6E5A80 LU WWN Device Id: 5 00a075 10e6e5a80 Firmware Version: MU01 User Capacity: 128,035,676,160 bytes [128 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Nov 4 17:38:59 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 130) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 3) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 31 5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 74107 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 241 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 097 097 000 Old_age Always - 108 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 176 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1036 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 053 049 000 Old_age Always - 47 (Min/Max 22/51) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16 197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Percent_Lifetime_Remain 0x0031 097 097 000 Pre-fail Offline - 3 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 23588083829 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 738387194 248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 172332261 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 8509 - # 2 Vendor (0xff) Completed without error 00% 8490 - # 3 Vendor (0xff) Completed without error 00% 8385 - # 4 Vendor (0xff) Completed without error 00% 8333 - # 5 Vendor (0xff) Completed without error 00% 8251 - # 6 Vendor (0xff) Completed without error 00% 8146 - # 7 Vendor (0xff) Completed without error 00% 8092 - # 8 Vendor (0xff) Completed without error 00% 7843 - # 9 Vendor (0xff) Completed without error 00% 7765 - #10 Vendor (0xff) Completed without error 00% 7721 - #11 Vendor (0xff) Completed without error 00% 7607 - #12 Vendor (0xff) Completed without error 00% 7571 - #13 Vendor (0xff) Completed without error 00% 7535 - #14 Vendor (0xff) Completed without error 00% 7433 - #15 Vendor (0xff) Completed without error 00% 7193 - #16 Vendor (0xff) Completed without error 00% 7156 - #17 Vendor (0xff) Completed without error 00% 7121 - #18 Vendor (0xff) Completed without error 00% 7086 - #19 Vendor (0xff) Completed without error 00% 7050 - #20 Vendor (0xff) Completed without error 00% 7011 - #21 Vendor (0xff) Completed without error 00% 6971 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (56994816-57060351) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl ======== END OF SMARTCTL ==== Is it time to say good by and replace this disk? Should I get a larger one? It has the boot info and operating system. Thanks for your insights -- ------------------------------ /\_/\ |O O| pepebuho(a)gmail.com ~~~~ Javier Perez ~~~~ While the night runs ~~~~ toward the day... m m Pepebuho watches from his high perch.

7 11

Strange lines in message log when running firefox??
by Michael D. Setzer II 06 Nov '23

06 Nov '23

Nov 5 09:39:17 xxxxxxxxx /usr/libexec/gdm-x-session[123970]: [Parent 123970, Main Thread] WARNING: Failed to call GetIdletime(): GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable Nov 5 09:39:17 xxxxxxxxx /usr/libexec/gdm-x-session[123970]: : 'glib warning', file /builddir/build/BUILD/firefox-119.0/toolkit/xre/nsSigHandlers.cpp:167 Nov 5 09:39:17 xxxxxxxxx firefox[123970]: Failed to call GetIdletime(): GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable +------------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor (Retired) mailto:mikes@guam.net mailto:msetzerii@gmail.com Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +------------------------------------------------------------+

2 1

rpm output
by Patrick Dupre 06 Nov '23

06 Nov '23

Hello, If I make a rpm -qa, I got xconsole-1.0.7-2.fc34.x86_64 nautilus-sendto-3.8.6-8.fc32.x86_64 --More--error: rpmdbNextIterator: skipping h# 132 Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet: Failed to parse Signature Packet because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>. because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 101000 (28)) Header SHA1 digest: OK error: rpmdbNextIterator: skipping h# 134 Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet: Failed to parse Signature Packet because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>. because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 1111100 (7c)) Header SHA1 digest: OK error: rpmdbNextIterator: skipping h# 137 Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet: Failed to parse Signature Packet because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>. because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 10011 (13)) Header SHA1 digest: OK error: rpmdbNextIterator: skipping h# 138 Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet: Failed to parse Signature Packet because: Signature appears to be created by a non-conformant OpenPGP implementation, see <https://github.com/rpm-software-management/rpm/issues/2351>. because: Malformed MPI: leading bit is not set: expected bit 8 to be set in 101101 (2d)) Header SHA1 digest: OK error: rpmdbNextIterator: skipping h# 140 Header RSA signature: BAD (header tag 268: invalid OpenPGP signature: Parsing an OpenPGP packet: Failed to parse Signature Packet Can I void these errors? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com ===========================================================================

5 11

← Newer
1
2
3
4
5
6
7
8
9
10
Older →