10:49 p.m.
Using liveusbcreator to dump a linux (not of any distro) iso image onto
a 256GiB flash drive (Made by Kensignton).
After selecting the linux ISO image, and setting the
value of the persistent storage, I click Create Live USB.
I get this error message:
Unknown filesystem. Your device may need to be reformatted.
The usb flash drive has partition 1 as a fat32 filesystem. It was
rejected by liveusbcreator with same error message as above.
So, I formatted it as a Ext3 filesystem. Got the same error message.
Next I tried
/usr/bin/livecd-iso-to-disk cd100627.iso /dev/sdc
Verifying image...
/sdb4/Download/OfflineNTpassword/BootCD/cd100627.iso: Could not get pvd data
Unable to read the disc checksum from the primary volume descriptor.
This probably means the disc was created without adding the checksum.Are
you SURE you want to continue?
Press Enter to continue or ctrl-c to abort
I press enter, and it exits without creating the bootable usb.
So, I tried to use windows and follow the iso creator's instructions to
transfer the iso to flash disk. My winxp-sp3 does not recognize the
drive. And when I try to format the drive, windows says it was not
able to format the drive.
It is indeed strange that I can format it under Linux, and mount it
and use it the ordinary way. But I cannot transfer the iso image to it.
Any ideas what to do next?
Thanx for your help.
12:41 p.m.
Report that bug. In view of this could be an preparing fail. Just for
case, make an control with an another usb key. If that fails too, fill
the bug.
2011/1/1 JD <jd1008(a)gmail.com>:
On 01/01/2011 12:49 AM, Zoltan Hoppar wrote:
> I meant to delete completely your drive again - and use plain FAT32 to
> hold the maximum compatibility. If you use ext systems, use just plain
> ext2 because journaling systems like ext3 and 4 can be a problem
> (journaling rewrites to often the storage - and that shortens the
> drive life). If the formatting fails (like you had just quick
> formatted- that wipes only the data space, or it's just incomplete -
> this is what I think that's happened) - it marks linux thats an unkown
> FS, and windows couldn't handle this, or makes it broken. On third:
> Don't forget, that flash drives has cache on most systems - so it's a
> bit slower in writing out the data, and if you pull out earlier that
> finishes the formatting or the writing - could be have bad data chunks
> - what could result the same as I told you earlier. HTH.
>
> Cheers,
>
> Z
>
> 2011/1/1 JD<jd1008(a)gmail.com>:
>> On 12/31/2010 10:45 PM, Zoltan Hoppar wrote:
>>> Hi,
>>>
>>> You have to wipe it the complete USB key again. When the process has
>>> fails, and finds some fragments - this is the result. Sometimes
>>> happens.
>>>
>>> Cheers,
>>>
>>> Z
>>> 2011/1/1 JD<jd1008(a)gmail.com>:
>>>> Using liveusbcreator to dump a linux (not of any distro) iso image onto
>>>> a 256GiB flash drive (Made by Kensignton).
>>>>
>>>> After selecting the linux ISO image, and setting the
>>>> value of the persistent storage, I click Create Live USB.
>>>> I get this error message:
>>>>
>>>> Unknown filesystem. Your device may need to be reformatted.
>>>>
>>>>
>>>> The usb flash drive has partition 1 as a fat32 filesystem. It was
>>>> rejected by liveusbcreator with same error message as above.
>>>>
>>>> So, I formatted it as a Ext3 filesystem. Got the same error message.
>>>>
>>>>
>>>> Next I tried
>>>> /usr/bin/livecd-iso-to-disk cd100627.iso /dev/sdc
>>>>
>>>> Verifying image...
>>>> /sdb4/Download/OfflineNTpassword/BootCD/cd100627.iso: Could not get pvd
data
>>>> Unable to read the disc checksum from the primary volume descriptor.
>>>> This probably means the disc was created without adding the checksum.Are
>>>> you SURE you want to continue?
>>>> Press Enter to continue or ctrl-c to abort
>>>> I press enter, and it exits without creating the bootable usb.
>>>>
>>>> So, I tried to use windows and follow the iso creator's instructions
to
>>>> transfer the iso to flash disk. My winxp-sp3 does not recognize the
>>>> drive. And when I try to format the drive, windows says it was not
>>>> able to format the drive.
>>>>
>>>> It is indeed strange that I can format it under Linux, and mount it
>>>> and use it the ordinary way. But I cannot transfer the iso image to it.
>>>>
>>>> Any ideas what to do next?
>>>>
>>>> Thanx for your help.
>>>>
>>>>
>>>> --
>>>> users mailing list
>>>> users(a)lists.fedoraproject.org
>>>> To unsubscribe or change subscription options:
>>>> https://admin.fedoraproject.org/mailman/listinfo/users
>>>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>>>>
>> I assume that by "wipe it" you mean that
>> I should run the /usr/bin/wipe utility on it?
>> I thought mkfs cleans it up sufficiently so that
>> it is recognized as fat partition or an ext2 partition.
>> Nevertheless, I will try your suggestion.
>>
>> Cheers,
>>
>> JD
>> --
>> users mailing list
>> users(a)lists.fedoraproject.org
>> To unsubscribe or change subscription options:
>> https://admin.fedoraproject.org/mailman/listinfo/users
>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>>
>
>
Well, I retried (after deleting all files and dirs.
I did not format it in a separate step this time.
I executed:
/usr/bin/livecd-iso-to-disk --format cd100627.iso /dev/sdc
Verifying image...
/sda1/Tmp/cd100627.iso: Could not get pvd data
Unable to read the disc checksum from the primary volume descriptor.
This probably means the disc was created without adding the checksum.Are
you SURE you want to continue?
Press Enter to continue or ctrl-c to abort
WARNING: THIS WILL DESTROY ANY DATA ON /dev/sdc!!!
Press Enter to continue or ctrl-c to abort
Warning: The resulting partition is not properly aligned for best
performance.
Waiting for devices to settle...
mke2fs 1.41.10 (10-Feb-2009)
Filesystem label=LIVE
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
16777216 inodes, 67108855 blocks
3355442 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
2048 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 35 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Cleaning up to exit...
umount: /media/usbdev.CtobRa: not mounted
There you have it! It gets formatted apparently to Ext2, but
after format it is not mountable.
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
--
PGP: 06853DF7
10:58 p.m.
Try
$ sudo /usr/bin/livecd-iso-to-disk --format --reset-mbr
/path/to/yourimage.iso /dev/sdb
(assuming the stick mounts as /dev/sdb.)
The extra parameters should format the thumbdrive and make its sector 0 a
standard MBR, also.
12:27 p.m.
On 01/01/2011 12:49 AM, Zoltan Hoppar wrote:
I meant to delete completely your drive again - and use plain FAT32
to
hold the maximum compatibility. If you use ext systems, use just plain
ext2 because journaling systems like ext3 and 4 can be a problem
(journaling rewrites to often the storage - and that shortens the
drive life). If the formatting fails (like you had just quick
formatted- that wipes only the data space, or it's just incomplete -
this is what I think that's happened) - it marks linux thats an unkown
FS, and windows couldn't handle this, or makes it broken. On third:
Don't forget, that flash drives has cache on most systems - so it's a
bit slower in writing out the data, and if you pull out earlier that
finishes the formatting or the writing - could be have bad data chunks
- what could result the same as I told you earlier. HTH.
Cheers,
Z
2011/1/1 JD<jd1008(a)gmail.com>:
> On 12/31/2010 10:45 PM, Zoltan Hoppar wrote:
>> Hi,
>>
>> You have to wipe it the complete USB key again. When the process has
>> fails, and finds some fragments - this is the result. Sometimes
>> happens.
>>
>> Cheers,
>>
>> Z
>> 2011/1/1 JD<jd1008(a)gmail.com>:
>>> Using liveusbcreator to dump a linux (not of any distro) iso image onto
>>> a 256GiB flash drive (Made by Kensignton).
>>>
>>> After selecting the linux ISO image, and setting the
>>> value of the persistent storage, I click Create Live USB.
>>> I get this error message:
>>>
>>> Unknown filesystem. Your device may need to be reformatted.
>>>
>>>
>>> The usb flash drive has partition 1 as a fat32 filesystem. It was
>>> rejected by liveusbcreator with same error message as above.
>>>
>>> So, I formatted it as a Ext3 filesystem. Got the same error message.
>>>
>>>
>>> Next I tried
>>> /usr/bin/livecd-iso-to-disk cd100627.iso /dev/sdc
>>>
>>> Verifying image...
>>> /sdb4/Download/OfflineNTpassword/BootCD/cd100627.iso: Could not get pvd data
>>> Unable to read the disc checksum from the primary volume descriptor.
>>> This probably means the disc was created without adding the checksum.Are
>>> you SURE you want to continue?
>>> Press Enter to continue or ctrl-c to abort
>>> I press enter, and it exits without creating the bootable usb.
>>>
>>> So, I tried to use windows and follow the iso creator's instructions to
>>> transfer the iso to flash disk. My winxp-sp3 does not recognize the
>>> drive. And when I try to format the drive, windows says it was not
>>> able to format the drive.
>>>
>>> It is indeed strange that I can format it under Linux, and mount it
>>> and use it the ordinary way. But I cannot transfer the iso image to it.
>>>
>>> Any ideas what to do next?
>>>
>>> Thanx for your help.
>>>
>>>
>>> --
>>> users mailing list
>>> users(a)lists.fedoraproject.org
>>> To unsubscribe or change subscription options:
>>> https://admin.fedoraproject.org/mailman/listinfo/users
>>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>>>
> I assume that by "wipe it" you mean that
> I should run the /usr/bin/wipe utility on it?
> I thought mkfs cleans it up sufficiently so that
> it is recognized as fat partition or an ext2 partition.
> Nevertheless, I will try your suggestion.
>
> Cheers,
>
> JD
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
Well, I retried (after deleting all files and dirs.
I did not format it in a separate step this time.
I executed:
/usr/bin/livecd-iso-to-disk --format cd100627.iso /dev/sdc
Verifying image...
/sda1/Tmp/cd100627.iso: Could not get pvd data
Unable to read the disc checksum from the primary volume descriptor.
This probably means the disc was created without adding the checksum.Are
you SURE you want to continue?
Press Enter to continue or ctrl-c to abort
WARNING: THIS WILL DESTROY ANY DATA ON /dev/sdc!!!
Press Enter to continue or ctrl-c to abort
Warning: The resulting partition is not properly aligned for best
performance.
Waiting for devices to settle...
mke2fs 1.41.10 (10-Feb-2009)
Filesystem label=LIVE
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
16777216 inodes, 67108855 blocks
3355442 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
2048 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 35 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Cleaning up to exit...
umount: /media/usbdev.CtobRa: not mounted
There you have it! It gets formatted apparently to Ext2, but
after format it is not mountable.
2:49 a.m.
I meant to delete completely your drive again - and use plain FAT32 to
hold the maximum compatibility. If you use ext systems, use just plain
ext2 because journaling systems like ext3 and 4 can be a problem
(journaling rewrites to often the storage - and that shortens the
drive life). If the formatting fails (like you had just quick
formatted- that wipes only the data space, or it's just incomplete -
this is what I think that's happened) - it marks linux thats an unkown
FS, and windows couldn't handle this, or makes it broken. On third:
Don't forget, that flash drives has cache on most systems - so it's a
bit slower in writing out the data, and if you pull out earlier that
finishes the formatting or the writing - could be have bad data chunks
- what could result the same as I told you earlier. HTH.
Cheers,
Z
2011/1/1 JD <jd1008(a)gmail.com>:
On 12/31/2010 10:45 PM, Zoltan Hoppar wrote:
> Hi,
>
> You have to wipe it the complete USB key again. When the process has
> fails, and finds some fragments - this is the result. Sometimes
> happens.
>
> Cheers,
>
> Z
> 2011/1/1 JD<jd1008(a)gmail.com>:
>> Using liveusbcreator to dump a linux (not of any distro) iso image onto
>> a 256GiB flash drive (Made by Kensignton).
>>
>> After selecting the linux ISO image, and setting the
>> value of the persistent storage, I click Create Live USB.
>> I get this error message:
>>
>> Unknown filesystem. Your device may need to be reformatted.
>>
>>
>> The usb flash drive has partition 1 as a fat32 filesystem. It was
>> rejected by liveusbcreator with same error message as above.
>>
>> So, I formatted it as a Ext3 filesystem. Got the same error message.
>>
>>
>> Next I tried
>> /usr/bin/livecd-iso-to-disk cd100627.iso /dev/sdc
>>
>> Verifying image...
>> /sdb4/Download/OfflineNTpassword/BootCD/cd100627.iso: Could not get pvd data
>> Unable to read the disc checksum from the primary volume descriptor.
>> This probably means the disc was created without adding the checksum.Are
>> you SURE you want to continue?
>> Press Enter to continue or ctrl-c to abort
>> I press enter, and it exits without creating the bootable usb.
>>
>> So, I tried to use windows and follow the iso creator's instructions to
>> transfer the iso to flash disk. My winxp-sp3 does not recognize the
>> drive. And when I try to format the drive, windows says it was not
>> able to format the drive.
>>
>> It is indeed strange that I can format it under Linux, and mount it
>> and use it the ordinary way. But I cannot transfer the iso image to it.
>>
>> Any ideas what to do next?
>>
>> Thanx for your help.
>>
>>
>> --
>> users mailing list
>> users(a)lists.fedoraproject.org
>> To unsubscribe or change subscription options:
>> https://admin.fedoraproject.org/mailman/listinfo/users
>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>>
I assume that by "wipe it" you mean that
I should run the /usr/bin/wipe utility on it?
I thought mkfs cleans it up sufficiently so that
it is recognized as fat partition or an ext2 partition.
Nevertheless, I will try your suggestion.
Cheers,
JD
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
--
PGP: 06853DF7
1:04 a.m.
On 12/31/2010 10:45 PM, Zoltan Hoppar wrote:
Hi,
You have to wipe it the complete USB key again. When the process has
fails, and finds some fragments - this is the result. Sometimes
happens.
Cheers,
Z
2011/1/1 JD<jd1008(a)gmail.com>:
> Using liveusbcreator to dump a linux (not of any distro) iso image onto
> a 256GiB flash drive (Made by Kensignton).
>
> After selecting the linux ISO image, and setting the
> value of the persistent storage, I click Create Live USB.
> I get this error message:
>
> Unknown filesystem. Your device may need to be reformatted.
>
>
> The usb flash drive has partition 1 as a fat32 filesystem. It was
> rejected by liveusbcreator with same error message as above.
>
> So, I formatted it as a Ext3 filesystem. Got the same error message.
>
>
> Next I tried
> /usr/bin/livecd-iso-to-disk cd100627.iso /dev/sdc
>
> Verifying image...
> /sdb4/Download/OfflineNTpassword/BootCD/cd100627.iso: Could not get pvd data
> Unable to read the disc checksum from the primary volume descriptor.
> This probably means the disc was created without adding the checksum.Are
> you SURE you want to continue?
> Press Enter to continue or ctrl-c to abort
> I press enter, and it exits without creating the bootable usb.
>
> So, I tried to use windows and follow the iso creator's instructions to
> transfer the iso to flash disk. My winxp-sp3 does not recognize the
> drive. And when I try to format the drive, windows says it was not
> able to format the drive.
>
> It is indeed strange that I can format it under Linux, and mount it
> and use it the ordinary way. But I cannot transfer the iso image to it.
>
> Any ideas what to do next?
>
> Thanx for your help.
>
>
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
I assume that by "wipe it" you mean that
I should run the /usr/bin/wipe utility on it?
I thought mkfs cleans it up sufficiently so that
it is recognized as fat partition or an ext2 partition.
Nevertheless, I will try your suggestion.
Cheers,
JD
12:45 a.m.
Hi,
You have to wipe it the complete USB key again. When the process has
fails, and finds some fragments - this is the result. Sometimes
happens.
Cheers,
Z
2011/1/1 JD <jd1008(a)gmail.com>:
Using liveusbcreator to dump a linux (not of any distro) iso image
onto
a 256GiB flash drive (Made by Kensignton).
After selecting the linux ISO image, and setting the
value of the persistent storage, I click Create Live USB.
I get this error message:
Unknown filesystem. Your device may need to be reformatted.
The usb flash drive has partition 1 as a fat32 filesystem. It was
rejected by liveusbcreator with same error message as above.
So, I formatted it as a Ext3 filesystem. Got the same error message.
Next I tried
/usr/bin/livecd-iso-to-disk cd100627.iso /dev/sdc
Verifying image...
/sdb4/Download/OfflineNTpassword/BootCD/cd100627.iso: Could not get pvd data
Unable to read the disc checksum from the primary volume descriptor.
This probably means the disc was created without adding the checksum.Are
you SURE you want to continue?
Press Enter to continue or ctrl-c to abort
I press enter, and it exits without creating the bootable usb.
So, I tried to use windows and follow the iso creator's instructions to
transfer the iso to flash disk. My winxp-sp3 does not recognize the
drive. And when I try to format the drive, windows says it was not
able to format the drive.
It is indeed strange that I can format it under Linux, and mount it
and use it the ordinary way. But I cannot transfer the iso image to it.
Any ideas what to do next?
Thanx for your help.
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
--
PGP: 06853DF7
4864
days inactive
4865
days old
6 comments
3 participants
participants (3)
-
Darr -
JD -
Zoltan Hoppar