On Wed, 2006-11-29 at 19:25 +0000, Thierry Sayegh De Bellis wrote:
Kenn Thyrsted wrote:
> Hi list.
>
> FC6 will not install on sataII due to unreckognized device ATI SB600.
>
according to
http://lkml.org/lkml/2006/11/22/264
there is a patch for kernel 2.6.19-rc6
You could always try it if you're adventurous....
a simple google search with ATI SB600 linux will tell you more
a bit experimental for what you are after maybe...
hth
Thierry
--
(o< Thierry Sayegh de Bellis, RHCE
//\
http://glossolalie.com
V_/_ Fingerprint: 9976 11FE D9C6 8C67 6242 7BB1 6466 3F1D 56ED 7D5A
Thanks for the response !
Yes, maybe a bit too experimental for me, and i have never patched my
kernel. -But it doesn't quite suit my problem either.
The patch states :
"....when the SB600 SATA is set as IDE mode by BIOS"
Wich - in my case isn't the problem. - I think...
My BIOS setting is AHCI, and i'd very much like to keep NCQ etc.
However i have succeeded in installing FC6 with kernel 2.6.18 (and OT
ubuntu 6.10 w. 2.6.17).
The catch here is to use the IRQPOLL parameter at boot.
BUT, this result in /var/log/messages growing _very_ fast, due to
interrupt errors (again OT ubuntu 6.10 has the same problem).
Regards
/Kenn